Претраживање
Приказ резултата 31-40 од 60
Intrinsic resistivity of sintered Nickel Manganite vs. powder activation time and density
(Belgrade : International Institute for the Science of Sintering, 2008)
In this work the DC resistivity of sintered nickel manganite NiMn2O4 (NTC thermistor material) was studied as a function of additional powder activation time in a planetary ball mill (0, 5, 15, 30, 45 and 60 min). The ...
Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2008)
In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in ...
Nanostructured Y2O3 Particles Doped with Europium Synthesized by Aerosol Route
(Iasi : Professional Association in Modern Manufacturing Technologies, ModTech, 2009)
Y2O3 doped with europium is a well known red phosphor material employed in modern high-resolution display devices such as plasma display panels (PDP) and field emission displays (FED). The incorporation of gadolinium in ...
Oxidation of metallic binder powder and its influence on mechanical properties metal-diamond composite
(Sendai : Japan Institute of Metals, 2000)
In this paper, the properties of metallic binders based on Co, Fe, bronze and their influence on mechanical characteristics of metallic binder-diamond composites, obtained by hot pressing of these powders, were analyzed. ...
Far infrared properties of iron doped single crystal PbTe
(Măgurele : National Institute of Research and Development for Optoelectronics, 2008)
Far infrared reflectivity spectra of single crystal PbTe samples doped with 0.2 at% Fe were measured in the temperature range between 10 K and 300 K. These spectra show very sharp and narrow dips below 120 cm-1. The ...
Investigation of zinc stannate synthesis using photoacoustic spectroscopy
(Belgrade : International Institute for the Science of Sintering, 2007)
Mixtures of ZnO and SnO2 powders, with molar ratio of 2:1, were mechanically activated for 40, 80 and 160 minutes in a planetary ball mill. The resulting powders were compacted into pellets and non-isothermally sintered ...
Nanomaterial N-CP/DLPLG as potentional tissue graft in osteoreparation in combination with bone marrow cells on subcutaneous implantation model
(Belgrade : Association of the Chemical Engineers of Serbia, 2008)
The need for bone graft materials in osteoreparation is tremendous. Many researches have shown that calcium-phosphate bioceramics have good biocompatibility and osteoconductivity. We used nanocomposite biomaterial calcium ...
Mechanochemical synthesis and electrical conductivity of nanocrystalline δ-Bi2O3 stabilized by HfO2 and ZrO2
(Belgrade : Serbian Chemical Society, 2009)
A powder mixture of α-Bi2O3 and HfO2, in the molar ratio 2:3, was mechanochemically treated in a planetary ball mill under air, using zirconium oxide vials and balls as the milling medium. After 50 h of milling, the ...
Mehanohemijski tretman neorganskih materijala
(Belgrade: Association of the Chemical Engineers of Serbia, 2001)
Pod mehanohemijskim tretmanom podrazumeva se mlevenje jednog ili smeše prahova u različitim tipovima mlinova. U radu je dat kratak pregled osnovnih aspekata ovakvog tretmana i to: (a) najčeše korišćenih mlinova – atricionog, ...
Thermal diffusivity of sintered 12CaO-7Al2O3
(Belgrade : International Institute for the Science of Sintering, 2003)
The thermal diffusivity and some electrical transport properties of sintered 12CaO-7Al2O3 were determined using a photoacoustic method with a transmission detection configuration. The thermal diffusivity, coefficient of ...