Претраживање
Приказ резултата 31-40 од 67
Microstructure changes caused by thermal etching of sintered ZnTiO3
(2014)
Polishing and thermal etching was performed on ZnTiO3sintered ceramic. Two set of specimens were recorded, on higher 1200oC/1100oC sintered/etched, and lower 900oC/800oC sintered/etched. Phase composition, crystallite sizes ...
BaTiO3 – ceramics and Fractal Microstructure Analyses
(Belgrade : Serbian Ceramic Society, 2014)
Ceramics grain structure is difficult to describe by using traditional analytical methods based on Euclidean geometry. Using the fractal geometric/analytic methods instead, the new approach is offered in this paper. There ...
3 Structural, morphological and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures
(Belgrade : Institute of Technical Sciences of SASA, 2013)
Starting nanopowders of TiO2 (anatase 99.7%) and a-Fe2O3 (hematite) were mixed in the weight ratio 60:40 and 40:60. Green samples were sintered in the temperature range 750-1250oC in air. Structural, morphological and ...
Structural analyses of sintered MT and BZT ceramics
(Belgrade : Serbian Society for Microscopy, 2010)
Development of dielectric materials is increasing with a rapid progress in mobile and satellite communications systems, where magnesium titanates find their place owing to good dielectric properties. Recently it has been ...
Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment
(Belgrade : Serbian Ceramic Society, 2016)
Commercial Mn-Zn powder (Mn0.63Zn0.37Fe2O4, 93 wt. % and Fe2O3 7 wt. %) was milled 0.5, 1, 2 and 4 hours in a planetary ball mill. Powders were characterized with XRD, SEM and particle seizer. Subsequent heating was monitored ...
Modeling, designing and processing of barium titanate stannate
(Belgrade : Serbian Ceramic Society, 2016)
Barium titanate stannate (BTS, BaTi1−xSnxO3) functionally graded materials (FGMs) with an
uniaxial Ti/Sn concentration gradient are very useful for applications in electroceramics, due
to a high dielectric constant in a ...
The crystal structure, microstructure, and dielectric properties of BaTi1-xSnxO3 (x = 0,0.05 and 0.1) ceramics sintered in different atmospheres (air and Ar)
(Belgrade : Institute of Technical Sciences of SASA, 2015)
Due to specific dielectric and ferroelectric properties, functional ceramics based on barium titanate (BaTiO3) have found application in semiconductor industries. Appropriate electrical properties of barium titanate-based ...
Microwave Electro Ceramic Based on Magnesium Titanate Compounds
(Paris : Atlantis Press, 2017)
The intensive progress in electronics, especially telecommunication and mobile phone in 1990s, was the main driving force for the extensive research and development of microwave ceramics. These materials are often used in ...
Environmental Aspects of Red Mud and Its Utilization as a Component of Building Materials
(Paris : Atlantis Press, 2017)
The Bayer process is the main industrial process covering 90 % of global production of alumina. The sintering process deals with the medium and low grades of bauxite resource. During the alumina production process, red mud ...
The Influence of Mechanical Activation on Sintering Process of BaCO3 -SrCO3 -TiO2 System
(2012)
Poster presented at the conference Advanced Ceramics and Application I - Serbian Ceramic Society, Belgrade May 10-11, 2012