Search
Now showing items 11-20 of 29
Densification rate and phase structure changes during sintering of zinc titanate ceramics
(Elsevier, 2009)
Densification rate and phase structure changes during sintering of nanosized ZnTiO3 were studied. Sintering was performed in a dilatometer in two regimes: the first to 900 °C (heating rates 5, 10 and 15 °C/min) and the ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Intergranular fractal impedance analysis of microstructure and electrical properties of rare-earth doped BaTiO3
(Hoboken, NJ : John Wiley & Sons, 2010)
Microstructure properties of barium-titanate based materials, expressed in grain boundary contacts, are of basic importance for electric properties of these material. In this study, the model of intergranular impedance ...
Tailoring and Processing of Defect Free Barium Titanate Stannate Functionally Graded Ceramics: BTS2.5/BTS5/BTS7/BTS10 FGMs
(Paris : Atlantis Press, 2017)
Four-component barium titanate stannate (BaTi1−x Sn x O3, BTS) functionally graded materials (FGMs) were designed, processed and examined. BTS powders with different tin content (x = 0.025, 0.05, 0.07 and 0.10, abbreviated ...
Facile synthesis of poly(ε-caprolactone) micro and nanospheres using different types of polyelectrolytes as stabilizers under ambient and elevated temperature
(Elsevier, 2013)
Poly(ε-caprolactone) (PCL) particles were prepared by physicochemical method with solvent/non-solvent systems. The synthetic polymer polyvinylpyrrolidone (PVP) and natural polymer poly(α,γ,l-glutamic acid) (PGA), were used ...
Preparation and properties of porous, biomorphic, ceria ceramics for immobilization of Sr isotopes
(Elsevier, 2013)
A new technology for radionuclide trapping which is based on bio-templating approach was proposed in this paper. Porous oxide ceramics was prepared by wet impregnation of biological template with water solution of cerium ...
Peculiarities in sintering behavior of Ca-deficient hydroxyapatite nanopowders
(Elsevier, 2012)
We report unusual sintering behavior of Ca-deficient hydroxyapatite processed with different heating rates; particularly, faster heating resulted in higher densification. We hypothesize that faster heating delays formation ...
Dense fine-grained biphasic calcium phosphate (BCP) bioceramics designed by two-step sintering
(Elsevier, 2011)
In this study, dense, fine-grained biphasic calcium phosphate bioceramics were designed via the two-step sintering method. The starting powder was nanosized calcium-deficient hydroxyapatite, whose phase composition, average ...
Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics
(Elsevier, 2014)
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated regarding their microstructural and dielectric characteristics. The content of 0.05 at% Mn was constant in all the ...
Characterization and microstructure evolution in Er-DOPED BaTiO3 ceramics
(Hoboken, NJ : John Wiley & Sons, 2010)
BaTiO3-ceramics are known as some of the most useful electroceramics with a various applications. In this study the effect of Er 2O3 as additive on the microstructure and dielectric properties of doped BaTiO3 was investigated. ...