Претраживање
Приказ резултата 11-20 од 47
Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates
(Elsevier, 2010)
The nickel and cobalt disperse alloy deposits of five different compositions were obtained by electrodeposition on Cu substrates in the galvanostatic regime from an ammonium sulfate-chloride solution. The effect of cathodic ...
Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
(Novi Sad : University of Novi Sad, Faculty of Technology, 2013)
Nanostructured single layered (pure TiO2 , pure α-Fe2O3 and mixed Fe2O3 /TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen ...
Dvostepeno sinterovanje, fazne transformacije, električne i mehaničke osobine nanostrukturnih biokeramičkih materijala na bazi hidroksiapatita
(Belgrade : University of Belgrade, Faculty of Physical Chemistry, 2014)
Doktorska disertacija se odnosi na kreiranje gustih nanostrukturnih sinterovanih materijala na bazi hidroksiapatita. Dvostepeno sinterovanje je iskorišćeno za dobijanje bifaznog kalcijum fosfata visoke gustine polazeći od ...
The influence of temperature on microstructure contact surfaces on BaTiO3 ceramic doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2013)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
(Elsevier, 2018)
The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of ...
Comprehensive characterization of BiFeO3 powder synthesized by the hydrothermal procedure
(Novi Sad Faculty of Technology, University of Novi Sad, 2016)
In this paper, bismuth ferrite (BFO) particles synthesized by controlled hydrothermal process, where the particles of small sizes and with high purity were obtained. Structural analysis showed that non-annealed powder can ...
Sintering Effects on Microstructure and Electrical Properties of CaCu3Ti4O12 Ceramics
(Hoboken, NJ : John Wiley & Sons, 2013)
CCTO powders were prepared by solid state reaction and mechanochemically, respectively. Synthesized powders were characterized by XRD, FE-SEM and PSA techniques. The sinterability of CCTO powders was investigated by heating ...
The influence of mechanical activation on structural evolution of nanocrystalline SrTiO3 powders
(Elsevier, 2017)
Structural changes caused by mechanical activation of SrTiO3 powders were investigated using a variety of methods. Average crystallite size continuously decreased with increased activation time to around 20 nm after 120 ...
Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate
(Journal of the European Ceramic Society, 2018)
The present study describes sintering behaviour of hydroxyapatite (HAp) upon addition of lithium iron phosphate (LFP) (1-10 wt.%) system in inert (Ar) atmosphere. The interaction between materials and melting of LFP ...
Electronic ceramic structure within the Voronoi cells model and microstructure fractals contacts surfaces new frontier applications
(Belgrade : International Institute for the Science of Sintering, 2013)
In this study, in order to establish grain shapes of sintered ceramics, new approach on correlation between microstructure and doped BaTiO3 -ceramics properties based, on Voronoi model and mathematical statistics calculations ...