Претраживање
Приказ резултата 101-108 од 108
Ispitivanje sinterovane cink-kalaj-oksidne keramike fotoakustičnom spektroskopijom
(Beograd : Savez hemijskih inženjera, 2007)
Prahovi ZnO i SnO2 pomešani u molamom odnosu 2:1 mehanički su aktivi- rani u planetamim mlinu sa kuglama u intervalu od 10 do 160 minuta. Do- bijene smeše presovane su i izotermski sinterovane na 1300 °C, dva sata. Uzorci ...
Enhancing Synthesis and Sintering of Zinc Titanate Using Mechanical Activation
(Progress in Advanced Materials and Processes, 2004)
Mechanical activation and sintering are used for obtaining zinc titanate, Zn2TiO4. Starting powder mixtures of ZnO and TiO2, in the molar ratio that is in accordance with the stoichiometry ofzinc titanate Zn2TiO4, were ...
Morphological and Structural Characterization of MgAl2O4 Spinel
(ETRAN, 2023)
Magnesium aluminate has the spinel structure along with good mechanical, chemical, and thermal properties. Magnesium aluminate has a wide range of applications including refractory ceramics, optically transparent ceramic ...
Structural characteristics of MgAl2O4 spinel
(Belgrade : Serbian Ceramic Society, 2023)
Magnesium aluminate spinel (MgAl2O4) is a material with good mechanical, chemical, and thermal properties, low dielectric permeability and loss tangent. Based on those properties, MgAl2O4 has found a significant application ...
Effect of mechanical activation on carbothermal synthesis and densification of ZrC
(American Ceramic Society, 2023)
Mixtures of ZrO2 and C were prepared by high-energy ball milling. Powders were milled for times from 0 to 120 minutes in air atmosphere. As milling time increased, surface area of powders increased, indicating significant ...
The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system / The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system
(Zurich : Trans Tech Publications, 2004)
Mixtures of starting ZnO and Cr2O3 powders in equimolar quantities were mechanically activated by grinding using a high energy vibro-mill for 0, 40 and 80 minutes. Qualitative X-ray diffraction analysis made after sintering ...
Effect of mechanical activation on carbothermal synthesis and densification of ZrC
(Elsevier BV, 2023)
Zirconium carbide ceramics were prepared by carbothermal reduction of ZrO2 and C that were mixed by high-energy ball milling. Powders were milled for times from 0 to 120 min in air. As milling time increased, the surface ...
Nanomechanical properties of PVDF–ZnO polymer nanocomposite
(Elsevier BV, 2023)
Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) ...