Претраживање
Приказ резултата 1-7 од 7
Uticaj parametara procesiranja na tok mehanohemijske sinteze i sprečavanje pojave aglomeracije sintetisanih nanostrukturnih prahova
(Belgrade : University of belgrade, Faculty of Physical Chemistry, 2009)
Keramički nanomaterijali kao što su cink oksid (ZnO) i cirkonijum dioksid (ZrO2), poseduju veliki potencijal za primenu u najrazličitijim oblastima industrijske proizvodnje pre svega zahvaljujući nanodimenzijama čestica. ...
Investigation of sintering kinetics of ZnO by observing reduction of the specific surface area
(Belgrade : International Institute for the Science of Sintering, 2007)
Reduction of the specific surface area of porous ZnO during the sintering process was studied. ZnO powder was sintered at temperatures from 673 K to 1173 K. The decrease in the specific surface area was observed as a ...
Evolution of the microstructure of disperse ZnO powders obtained by the freeze-drying method
(Lausanne : Elsevier Science, 2004)
Freeze-drying, as a cryochemical powder processing method is applied in the synthesis of ZnO submicrometer to narrosized powders. The process involves rapid freezing of the sprayed precursor solution, drying under vacuum ...
Aerosol synthesis of ruthenium doped ZnO fine particles
(Elsevier, 2004)
Zinc oxide, as n-type semiconducting nonstoichiometric metal oxide, with band gap of 3.2 eV, has wide application in optical and electronic devices (Rajeshwar et al., 2001), especially when composed of ultrafine crystallites ...
Mechanochemical synthesis of ZnO nanostructured powder using different organic surfactants and their influence on the particles size and morfology
(2009)
Poster presented at the 11th Conference of the Materials Research Society of Serbia - YUCOMAT 2009, Herceg Novi, Montenegro, August 31 – September 4, 2009
Uticaj parametara procesiranja na morfologiju mehanohemijski sintetisanog nanostrukturnog praha cink oksida
(Beograd : Institut tehničkih nauka SANU, 2009)
Proces aglomeracije sintetisanih nanostrukturnih prahova predstavlja najvažniji problem i nedostatak metode mehanohemijskog procesiranja. Najznačajniji napredak u cilju rešavanja ovog problema načinjen je uvođenjem reagensa ...
Mechanochemical synthesis of ZnO nanostructured powder using a different organic surfactants and its influence on the particles size and morphology
(Belgrade : Institute of Technical Sciences of SASA, 2009)
Pure zinc oxide (ZnO) nanostructured powder was prepared by mechanochemical method followed by heat-treatment in a planetary ball-mill using agate jars and alumina balls. The frequency of the rotation of jars around the ...