Pretraživanje
Prikaz rezultata 1-10 od 32
Composition of red mud and/or metakaolin-based modified geopolymers
(Belgrade : Materials Research Society of Serbia, 2017)
There is potential use of red mud for synthesis of inorganic polymeric materials through a geopolymerization process as an alternative in the sectors of construction and building materials. By introducing of inorganic and ...
The fractal nature materials microstructure influence on electrochemical energy sources
(Belgrade : International Institute for the Science of Sintering, 2015)
With increasing of the world energy crisis, research for new, renewable and alternative energy sources are in growth. The focus is on research areas, sometimes of minor importance and applications, where the different ...
The Influence of Temperature on Microstructure Contact Surfaces on BaTiO3 –ceramics Doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2014)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
Microstructural and electrical properties of cordierite-based ceramics obtained after two-step sintering technique
(Science of Sintering, 2016)
Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, ...
Supporting information for the article: Lukić, M.J., Kuzmanović, M., Sezen, M., Bakan, F., Egelja, A., Veselinović, L., 2018. Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate. Journal of the European Ceramic Society 38, 2120–2133. https://doi.org/10.1016/j.jeurceramsoc.2017.12.023
(Journal of the European Ceramic Society, 2018)
Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
(Novi Sad : University of Novi Sad, Faculty of Technology, 2013)
Nanostructured single layered (pure TiO2 , pure α-Fe2O3 and mixed Fe2O3 /TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen ...
Dvostepeno sinterovanje, fazne transformacije, električne i mehaničke osobine nanostrukturnih biokeramičkih materijala na bazi hidroksiapatita
(Belgrade : University of Belgrade, Faculty of Physical Chemistry, 2014)
Doktorska disertacija se odnosi na kreiranje gustih nanostrukturnih sinterovanih materijala na bazi hidroksiapatita. Dvostepeno sinterovanje je iskorišćeno za dobijanje bifaznog kalcijum fosfata visoke gustine polazeći od ...
The influence of temperature on microstructure contact surfaces on BaTiO3 ceramic doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2013)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
Influence of Bi2O3 on microstructure and electrical properties of ZnO-SnO2 ceramics
(Belgrade : International Institute for the Science of Sintering, 2007)
The effects of small amounts (0.5; 1.0 and 1.5 mol. %) of bismuth oxide on the microstructure and electrical properties of ZnO-SnO2 ceramics have been studied. Starting powders of ZnO and SnO2 were mixed in the molar ratio ...
Comprehensive characterization of BiFeO3 powder synthesized by the hydrothermal procedure
(Novi Sad Faculty of Technology, University of Novi Sad, 2016)
In this paper, bismuth ferrite (BFO) particles synthesized by controlled hydrothermal process, where the particles of small sizes and with high purity were obtained. Structural analysis showed that non-annealed powder can ...