A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics
2008
Preuzimanje 🢃
Autori
Ivetić, TamaraNikolić, Maria Vesna
Paraskevopoulos, Konstantinos M.
Blagojević, Vladimir D.
Nikolić, Pantelija M.
Ristić, Momčilo M.
Ostala autorstva
Bellosi, AlidaBabini, Gian Nicola
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.
Izvor:
Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008], 2008Izdavač:
- Faenza : Institute of Science and Technology for Ceramics, National Research Council
Finansiranje / projekti:
- Proučavanje međuzavisnosti u trijadi ''sinteza-struktura-svojstva'' za funkcionalne materijala (RS-MESTD-MPN2006-2010-142011)
Institucija/grupa
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Ivetić, Tamara AU - Nikolić, Maria Vesna AU - Paraskevopoulos, Konstantinos M. AU - Blagojević, Vladimir D. AU - Nikolić, Pantelija M. AU - Ristić, Momčilo M. PY - 2008 UR - https://dais.sanu.ac.rs/123456789/3565 AB - ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material. PB - Faenza : Institute of Science and Technology for Ceramics, National Research Council C3 - Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008] T1 - A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics UR - https://hdl.handle.net/21.15107/rcub_dais_3565 ER -
@conference{ editor = "Bellosi, Alida, Babini, Gian Nicola", author = "Ivetić, Tamara and Nikolić, Maria Vesna and Paraskevopoulos, Konstantinos M. and Blagojević, Vladimir D. and Nikolić, Pantelija M. and Ristić, Momčilo M.", year = "2008", abstract = "ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.", publisher = "Faenza : Institute of Science and Technology for Ceramics, National Research Council", journal = "Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008]", title = "A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics", url = "https://hdl.handle.net/21.15107/rcub_dais_3565" }
Bellosi, A., Babini, G. N., Ivetić, T., Nikolić, M. V., Paraskevopoulos, K. M., Blagojević, V. D., Nikolić, P. M.,& Ristić, M. M.. (2008). A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics. in Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008] Faenza : Institute of Science and Technology for Ceramics, National Research Council.. https://hdl.handle.net/21.15107/rcub_dais_3565
Bellosi A, Babini GN, Ivetić T, Nikolić MV, Paraskevopoulos KM, Blagojević VD, Nikolić PM, Ristić MM. A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics. in Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008]. 2008;. https://hdl.handle.net/21.15107/rcub_dais_3565 .
Bellosi, Alida, Babini, Gian Nicola, Ivetić, Tamara, Nikolić, Maria Vesna, Paraskevopoulos, Konstantinos M., Blagojević, Vladimir D., Nikolić, Pantelija M., Ristić, Momčilo M., "A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics" in Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008] (2008), https://hdl.handle.net/21.15107/rcub_dais_3565 .