Претраживање
Приказ резултата 41-50 од 55
Interdependence of fundamental and applied research in material science
(Belgrade : International Institute for the Science of Sintering, 2011)
Development of materials with desirable properties essentially depends on realization of interdependence: natural science ⇔ technical sciences. Taking this into account, in order to develop of new advanced materials it is ...
Analysis of the initial-stage sintering of mechanically activated SrTiO3
(ETRAN, 2019)
The initial-stage of sintering plays a significant role in determining the final microstructure that defines the main characteristics of electroceramics materials such as functional properties. In this article non-isothermal ...
The influence of alumino-silicate matrix composition on surface hydrophobic properties
(Belgrade : ETRAN, 2019)
The purpose of this investigation is to investigate the hydrophobicity of geopolymers, new alumino-silicate materials and the influence of Si/Al ratio on their surface properties. Contact angle measurement (CAM) as reliable ...
Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics
(Belgrade : International Institute for the Science of Sintering, 2013)
Mechanical activation is a commonly used and relatively fast and inexpensive procedure for sample preparation before the sintering process. Cordierite, a stoichiometric mixture of three different oxides (2MgO⋅2Al2O3⋅5SiO2) ...
Synthesis of barium-zinc-titanate ceramics
(Belgrade : International Institute for the Science of Sintering, 2012)
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered ...
Sintering of cordierite in the presence of MoO3 and crystallization analysis
(Belgrade : International Institute for the Science of Sintering, 2014)
Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier ...
Microstructural and electrical properties of cordierite-based ceramics obtained after two-step sintering technique
(Insternational Institute for the Science of Sintering, 2016)
Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, ...
The influence of compaction pressure on the density and electrical properties of cordierite-based ceramics
(Belgrade : International Institute for the Science of Sintering, 2015)
Due to its characteristics, cordierite, 2MgO·2Al2O3·5SiO2, is a high-temperature ceramic material of a great scientific interest. Mechanical activation of the starting mixtures containing 5.00 mass% TiO2 was performed in ...
Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering
(Belgrade : ETRAN, 2018)
The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ...
The fractal nature approach in ceramics materials and discrete field simulation
(ETRAN, 2018)
In this paper, we present experimental data of static fractals and compare the results with theoretical analysis obtained using dynamic particle simulation. The fractal simulator presented in this manuscript is pioneer ...