Pretraživanje
Prikaz rezultata 31-40 od 75
Forming of titanium titnate
(Kiev, 2009)
Lately a great attention is spared development of materials, possessing high stable dielectric properties. Among such materials a considerable place is occupied by titanates of metal series, including titanate of magnesium. ...
Densification rate and phase structure changes during sintering of zinc titanate ceramics
(Elsevier, 2009)
Densification rate and phase structure changes during sintering of nanosized ZnTiO3 were studied. Sintering was performed in a dilatometer in two regimes: the first to 900 °C (heating rates 5, 10 and 15 °C/min) and the ...
Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics
(Elsevier, 2009)
Starting mixtures of ZnO, TiO2 and MgO (0, 1.25 and 2.5 wt.% MgO) powders were mechanically activated for 15 min in a planetary ball mill. The powders obtained were sintered non-isothermally to temperatures between 800 and ...
Surface analysis of bismuth titanate by Auger and X-ray photoelectron spectroscopy
(Elsevier, 2009)
The Auger and XPS technique has been used for investigation in the surface of bismuth titanate (Bi4Ti3O12) (BIT) ceramics obtained by reactive sintering from Bi2O3 and TiO2 oxides. All peaks characteristic for bismuth, ...
Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a supercritical carbon dioxide-ethanol mixture
(Springer, 2009)
Nanosilica/poly(methyl methacrylate) (PMMA) composites are used to improve the mechanical properties of neat PMMA polymer. In order to obtain superior mechanical properties, it is essential to achieve good bonding between ...
Mechanochemically induced amorphous/crystalline phase transition in the Bi4Ti3O12 compound
(Elsevier, 2009)
Concurrent milling of Bi4Ti3O12 was carried out in a planetary ball mill with hardened-steel 13 or 6 mm diameter balls with a goal to investigate how the system responds to the constrains imposed by milling. Milling intensity ...
Nanostructured materials for optoelectronic applications
(Belgrade : Institute of Technical Sciences of SASA, 2009)
New way to improve the surface properties of the inorganic and organic materials via nanotubes treatment process has been shown. It has been testified that the surface mechanical hardness of the MgF2, LiF, etc. materials ...
Controlled assembly of Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres under ultrasonic irradiation
(Elsevier, 2009)
An ultrasound field was applied to obtain PLGA/HAp biocomposite nanospheres. Formulation of PLGA/HAp, composite revealed significant dependence of the morphology of the obtained composite on synthesis parameters, like the ...
Precursor particle size as the key parameter for isothermal tuning of morphology from nanofibers to nanotubes in the Na2-xHxTi nO2n+1 system through hydrothermal alkali treatment of rutile mineral sand
(Washington : American Chemical Society, 2009)
Morphology control in the (Na,H)2TinO2n+1 system has been achieved by introducing particle size as the key parameter during hydrothermal synthesis. The process is applied for the synthesis of TiO2-based nanofibers and ...
Far infrared study of impurity local modes in Pr doped PbTe
(Elsevier, 2009)
Single crystal samples of lead telluride doped with Pr were produced using the Bridgman method. Far infrared spectra of the samples doped with 0.15 at%, 0.25 at% and 0.6 at% Pr are presented. The experimental data were ...