Pretraživanje
Prikaz rezultata 1-10 od 11
The influence of mechanical activation on sintering process of BaCO3-SrCO3-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2012)
In this article the influence of mechanical activation on sintering process of bariumstrontium-titanate ceramics has been investigated. Both non-activated and mixtures treated in a planetary ball mill for 5, 10, 20, 40, ...
Kinetics of Mechanically Activated TiO2-based Oxides Followed by DTA
(Belgrade : Serbian Ceramic Society, 2012)
TiO2-based materials are widely used in production of ceramic capacitors and semiconductors. The conventional method of ceramics synthesis relies on the solid-state reaction between TiO2 and other compounds (BaCO3, BaO, ...
The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...
Electrical Properties of Sintered Magnesium- titanate Ceramics
(Belgrade : Serbian Ceramic Society, 2012)
Mixtures of MgO and TiO2 were mechanically activated in a planetary ball mill for different time intervals. Thus obtained powders were sintered in a furnace for 2 h at temperature of 1300 °C in air atmosphere. Raman ...
Electrical properties of mechanochemically activated cordierite ceramics
(Springer, 2012)
Three-component oxide mixtures were prepared containing MgO, Al 2 O 3 and SiO 2 in a 2 : 2 : 5 ratio with addition of 10% Bi 2 O 3. The mixtures were mechanically activated in a range from 5 to 240 min in a mill with ceramic ...
Compaction pressure's influence on density and electrical properties of sintered cordierite-based ceramics
(Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade, 2012)
Mechanical activation is widely used for sample preparation before the sintering process. However, the influence of pressure, which is used for compaction, has not been completely investigated. Cordierite, 2MgO_2Al2O3_5SiO2, ...
Influence of Mechanical Activation on the Constituents of the MgO-Al2O3-SiO2-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
Cordierite, 2MgO2Al2O35SiO2, is a very attractive high-temperature ceramic material, due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good ...
Uticaj mehaničke energije na komponente MgO-Al2O3-SiO2-TiO2 sistema
(Beograd : Savez inženjera i tehničara Srbije, 2012)
U ovom radu je ispitivan uticaj mehaničke energije na strukturu i promene u mikrostrukturi sistema MgO-Al2O3-SiO2-TiO2. Utvrđeno je da mehanička energija pospešuje homogenizaciju polaznih komponenti, utiče na veličinu i ...
Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive
(Elsevier, 2012)
Due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅ 5SiO2, is a very attractive high-temperature ...
Influence of mechanical activation on electrical properties of barium–zinc–titanate ceramics sintered at 1100°C
(Springer US, 2012)
Starting mixtures of BaCO3, ZnO, and TiO2 powders are mechanically activated in a planetary ball mill for various periods of time. The powders obtained are sintered isothermally at 1100°C for 120 min. Non-isothermal sintering ...