Претраживање
Приказ резултата 41-50 од 67
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
Structural characterization and electrical properties of sintered magnesium–titanate ceramics
(Elsevier, 2013)
In this article the influence of ball miling process on structure of MgO–TiO2 system, as well as the electrical properties of samples after sintering, was investigated. The mixtures of MgO–TiO2 powders were mechanically ...
Peculiarities in sintering behavior of Ca-deficient hydroxyapatite nanopowders
(Elsevier, 2012)
We report unusual sintering behavior of Ca-deficient hydroxyapatite processed with different heating rates; particularly, faster heating resulted in higher densification. We hypothesize that faster heating delays formation ...
Structural and Electrical Properties of Sintered Barium-Zinc-Titanate Ceramics
(Warsaw : Institute of Physics, Polish Academy of Science, 2011)
The aim of this work was an investigation of structural and electrical properties of sintered barium-zinc-titanate ceramics. Mixtures of BaCO3, ZnO and TiO2 were mechanically activated in a planetary ball mill up to 80 ...
Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics
(Elsevier, 2014)
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated regarding their microstructural and dielectric characteristics. The content of 0.05 at% Mn was constant in all the ...
Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics
(Belgrade : International Institute for the Science of Sintering, 2011)
Sintering process is a complex of different synergetic effects during the ceramics materials consolidation. The microstructural level properties control is very important as a stage in advanced materials prognosis. SEM ...
Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties
(Belgrade : International Institute for the Science of Sintering, 2012)
Doped BaTiO 3-ceramics is very interesting for their application as PTCR resistors, multilayer ceramic capacitors, thermal sensors etc. Ho doped BaTiO 3 ceramics, with different Ho 2O 3 content, ranging from 0.01 to 1.0 ...
The effect of ball milling on properties of sintered manganese-doped alumina
(Elsevier, 2019)
Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina ...
Synthesis and sintering of high-temperature composites based on mechanically activated fly ash
(Belgrade : International Institute for the Science of Sintering, 2012)
Amount of fly ash which is and yet to be generated in the coming years highlights the necessity of developing new methods of the recycling where this waste can be reused in significant quantity. A new possibility for fly ...
Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity
(Elsevier, 2019)
The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to ...