Претраживање
Приказ резултата 21-30 од 40
Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2008)
In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in ...
Investigation of zinc stannate synthesis using photoacoustic spectroscopy
(Belgrade : International Institute for the Science of Sintering, 2007)
Mixtures of ZnO and SnO2 powders, with molar ratio of 2:1, were mechanically activated for 40, 80 and 160 minutes in a planetary ball mill. The resulting powders were compacted into pellets and non-isothermally sintered ...
Analysis of the initial-stage sintering of mechanically activated SrTiO3
(ETRAN, 2019)
The initial-stage of sintering plays a significant role in determining the final microstructure that defines the main characteristics of electroceramics materials such as functional properties. In this article non-isothermal ...
Influence of Mechanical Activation on Electrical Properties of Ceramic Materials in VHF Band
(Belgrade : ETRANBelgrade : Academic Mind, 2019)
Mechanical activation is commonly used as a pre-sintering process in order to enhance the reactivity of materials, reduce the particle size, increase diffusion rates, accelerate the reaction, and lower the sintering ...
Preparation and characterization of ZrB2-TiB2 based composites for hypersonic systems
(Belgrade : Innovation Center of Faculty of Mechanical Engineering, 2021)
ZrB2 ceramics are considered potential materials for hypersonic systems in view of the melting point exceeding 3000 °C and excellent ablation resistance. Second phases, including SiC or CrB2, further improve the oxidation ...
Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive
(Belgrade : Materials Research Society of Serbia, 2011)
According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ...
Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA
(Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2015)
Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of ...
Influence of one activated component on the sintering process of three phase system
(Belgrade : Materials Research Society of Serbia, 2013)
According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In ...
Sintering of mechanically activated MgO-TiO2 system
(Belgrade : Institute of Technical Sciences of SASA, 2011)
Mixtures of MgO-TiO2 powders were mechanically activated in planetary ball mill for time interval from 0 to 120 minutes. The influence of mechanical activation on phase composition and crystal structure was analyzed by ...
Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive
(Elsevier, 2012)
Due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅ 5SiO2, is a very attractive high-temperature ...