Pretraživanje
Prikaz rezultata 1-10 od 12
Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment
(Science of Sintering, 2017)
Commercial Mn-Zn powder (Mn0.63Zn0.37Fe2O4, 93 wt. % and Fe2O3 7 wt. %) was milled 0.5, 1, 2 and 4 hours in a planetary ball mill. The goal was to observe intensive milling influences on oxidation and reduction processes ...
New aspects in processing of hydroxyapatite ceramics
(Belgrade : Serbian Ceramic Society, 2017)
Sintering of hydroxyapatite ceramics has been a challenging topic for decades since the material has good bioactivity, proven biocompatibility, low cost, and high availability. Besides its biomaterial applications, ...
Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors
(IEEE, 2017)
Pseudobrookite thick films were obtained by screen printing paste composed of a 1:1.5 molar ratio mixture of starting nanopowders of hematite and anatase, glass frit and organic binder. The films were deposited on alumina ...
Discrete temperature values in the sintering process as a BaTiO3-ceramics properties parameter
(Belgrade : International Institute for the Science of Sintering, 2017)
In this paper, we develop the new physical-mathematical time scale approach-model applied to BaTiO3-ceramics. At the beginning, a time scale is defined to be an arbitrary closed subset of the real numbers R, with the ...
Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities
(Elsevier, 2017)
In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ...
Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent
(Belgrade : International Institute for the Science of Sintering, 2017)
In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, ...
Sintering of fly ash based composites with zeolite and bentonite addition for application in construction materials
(International Institute for the Science of Sintering, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Microwave Electro Ceramic Based on Magnesium Titanate Compounds
(Paris : Atlantis Press, 2017)
The intensive progress in electronics, especially telecommunication and mobile phone in 1990s, was the main driving force for the extensive research and development of microwave ceramics. These materials are often used in ...
Environmental Aspects of Red Mud and Its Utilization as a Component of Building Materials
(Paris : Atlantis Press, 2017)
The Bayer process is the main industrial process covering 90 % of global production of alumina. The sintering process deals with the medium and low grades of bauxite resource. During the alumina production process, red mud ...