Претраживање
Приказ резултата 1-5 од 5
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(International Institute for the Science of Sintering (IISS), 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...
TiO2 nanotubes film/FTO glass interface: Thermal treatment effects
(ETRAN, 2022)
Pure Ti films deposited by radio-frequency magnetron sputtering on FTO glass were anodized to fabricate TiO2 nanotubes (NTs) arrays. The TiO2 NTs/FTO samples were sintered at 450, 550 and 630°C, in ambient air. The thermal ...
The Analysis of the Nucleation Process of the Lithium Germanium Phosphate Glass
(Science of Sintering, 2022)
The nucleation process of lithium germanium-phosphate glass was studied to determine the temperature range of nucleation and the temperature of the maximum nucleation rate. The differential thermal analysis (DTA), and ...
Fabrication of Ceramic Monoliths from Diatomaceous Earth: Effects of Calcination Temperature on Silica Phase Transformation
(Science of SinteringScience of Sintering, 2022)
The raw diatomaceous earth from the vicinity of Bitola (North Macedonia) showed low bulk density (0.61–0.69 g/cm3), high-water absorption (75–81%) and porosity (66–72%). The chemical composition was determined with ICP-MS, ...
Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics
(Science of Sintering, 2022)
In this study, microstructure evolution and dielectric properties of SrTiO3 ceramic have been investigated, whereby mechanical activation of SrTiO3 powders was used to modify the functional properties of ceramic materials. ...