Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments
Само за регистроване кориснике
2004
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Nanocomposite powders in the system (La1-xSx)(a)MnO3-YSZ((1-y)) [LSM-YSZ], as an attractive cathode material for high operating solid oxide fuel cell (SOFC), were obtained through ultrasonic spray pyrolysis (1.7 MHz) method. The principle of the synthesis is based on a single-step high temperature aerosol decomposition of atomized precursor solutions composed from yttria stabilized ZrO2 sol (average particle size similar to 60 nm) and corresponding aqueous nitrate and hydrogen peroxide solutions of La, Sr and Mn. Two starting systems were examined: (a) (La0.76Sr0.24)(0.93)MnO3 with 0% YSZ, and (b) (La0.77Sr0.23)(0.92)MnO3-YSZ(0.81) with corresponding molar ratio LSM/YSZ = 48:52. X-ray diffraction analysis of as-prepared powders showed the presence of a lanthanum magnesium oxide and yttrium zirconium oxide. Compositional homogeneity and particle morphology were determined by SEM analysis. LSM-YSZ obtained particles are spherical in shape, submicron in size and composed of primary subgra...ins. TEM analysis of ultra-cross section revealed dense-packed nanosized grains, several tens of nanometers in diameter. After powders calcination TEM observations confirmed dense particle structure composed of primary grains, with a mean diameter of around 100 nm. The structural changes expressed through the crystallite growth were analyzed by nonisothermal differential scanning calorimetry (DSC).
Кључне речи:
structural changes / spray pyrolysis / SOFCs / nanocomposite materialsИзвор:
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2004, 375, 615-619Издавач:
- Elsevier Science Sa, Lausanne
DOI: 10.1016/j.msea.2003.10.270
ISSN: 0921-5093
WoS: 000223329700114
Scopus: 2-s2.0-3142761008
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Marinković, Zorica AU - Mančić, Lidija AU - Cribier, J. F. AU - Ohara, Satoshi AU - Fukui, T. AU - Milošević, Olivera PY - 2004 UR - https://dais.sanu.ac.rs/123456789/12878 AB - Nanocomposite powders in the system (La1-xSx)(a)MnO3-YSZ((1-y)) [LSM-YSZ], as an attractive cathode material for high operating solid oxide fuel cell (SOFC), were obtained through ultrasonic spray pyrolysis (1.7 MHz) method. The principle of the synthesis is based on a single-step high temperature aerosol decomposition of atomized precursor solutions composed from yttria stabilized ZrO2 sol (average particle size similar to 60 nm) and corresponding aqueous nitrate and hydrogen peroxide solutions of La, Sr and Mn. Two starting systems were examined: (a) (La0.76Sr0.24)(0.93)MnO3 with 0% YSZ, and (b) (La0.77Sr0.23)(0.92)MnO3-YSZ(0.81) with corresponding molar ratio LSM/YSZ = 48:52. X-ray diffraction analysis of as-prepared powders showed the presence of a lanthanum magnesium oxide and yttrium zirconium oxide. Compositional homogeneity and particle morphology were determined by SEM analysis. LSM-YSZ obtained particles are spherical in shape, submicron in size and composed of primary subgrains. TEM analysis of ultra-cross section revealed dense-packed nanosized grains, several tens of nanometers in diameter. After powders calcination TEM observations confirmed dense particle structure composed of primary grains, with a mean diameter of around 100 nm. The structural changes expressed through the crystallite growth were analyzed by nonisothermal differential scanning calorimetry (DSC). PB - Elsevier Science Sa, Lausanne T2 - Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing T1 - Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments SP - 615 EP - 619 VL - 375 DO - 10.1016/j.msea.2003.10.270 UR - https://hdl.handle.net/21.15107/rcub_dais_12878 ER -
@article{ author = "Marinković, Zorica and Mančić, Lidija and Cribier, J. F. and Ohara, Satoshi and Fukui, T. and Milošević, Olivera", year = "2004", abstract = "Nanocomposite powders in the system (La1-xSx)(a)MnO3-YSZ((1-y)) [LSM-YSZ], as an attractive cathode material for high operating solid oxide fuel cell (SOFC), were obtained through ultrasonic spray pyrolysis (1.7 MHz) method. The principle of the synthesis is based on a single-step high temperature aerosol decomposition of atomized precursor solutions composed from yttria stabilized ZrO2 sol (average particle size similar to 60 nm) and corresponding aqueous nitrate and hydrogen peroxide solutions of La, Sr and Mn. Two starting systems were examined: (a) (La0.76Sr0.24)(0.93)MnO3 with 0% YSZ, and (b) (La0.77Sr0.23)(0.92)MnO3-YSZ(0.81) with corresponding molar ratio LSM/YSZ = 48:52. X-ray diffraction analysis of as-prepared powders showed the presence of a lanthanum magnesium oxide and yttrium zirconium oxide. Compositional homogeneity and particle morphology were determined by SEM analysis. LSM-YSZ obtained particles are spherical in shape, submicron in size and composed of primary subgrains. TEM analysis of ultra-cross section revealed dense-packed nanosized grains, several tens of nanometers in diameter. After powders calcination TEM observations confirmed dense particle structure composed of primary grains, with a mean diameter of around 100 nm. The structural changes expressed through the crystallite growth were analyzed by nonisothermal differential scanning calorimetry (DSC).", publisher = "Elsevier Science Sa, Lausanne", journal = "Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing", title = "Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments", pages = "615-619", volume = "375", doi = "10.1016/j.msea.2003.10.270", url = "https://hdl.handle.net/21.15107/rcub_dais_12878" }
Marinković, Z., Mančić, L., Cribier, J. F., Ohara, S., Fukui, T.,& Milošević, O.. (2004). Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments. in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing Elsevier Science Sa, Lausanne., 375, 615-619. https://doi.org/10.1016/j.msea.2003.10.270 https://hdl.handle.net/21.15107/rcub_dais_12878
Marinković Z, Mančić L, Cribier JF, Ohara S, Fukui T, Milošević O. Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments. in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing. 2004;375:615-619. doi:10.1016/j.msea.2003.10.270 https://hdl.handle.net/21.15107/rcub_dais_12878 .
Marinković, Zorica, Mančić, Lidija, Cribier, J. F., Ohara, Satoshi, Fukui, T., Milošević, Olivera, "Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments" in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 375 (2004):615-619, https://doi.org/10.1016/j.msea.2003.10.270 ., https://hdl.handle.net/21.15107/rcub_dais_12878 .