The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
Само за регистроване кориснике
2006
Аутори
Pavlović, Vera P.Nikolić, Maria Vesna
Spasojević, Vojislav
Blanuša, J.
Živković, Ljiljana
Stojanović, B. D.
Pavlović, Vladimir B.
Ristić, Momčilo M.
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.
Кључне речи:
BaTiO3 / tribophysical activation / sinteringИзвор:
Advanced Materials Forum III, 2006, 514-516, -1570Издавач:
- Durnten-Zurich : Trans Tech Publications Ltd.
Напомена:
- Materials Science Forum 514-516
DOI: 10.4028/www.scientific.net/MSF.514-516.1566
ISBN: 978-0878494026
ISSN: 0255-5476
WoS: 000238056400310
Scopus: 2-s2.0-37849024310
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Pavlović, Vera P. AU - Nikolić, Maria Vesna AU - Spasojević, Vojislav AU - Blanuša, J. AU - Živković, Ljiljana AU - Stojanović, B. D. AU - Pavlović, Vladimir B. AU - Ristić, Momčilo M. PY - 2006 UR - https://dais.sanu.ac.rs/123456789/11709 AB - In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis. PB - Durnten-Zurich : Trans Tech Publications Ltd. C3 - Advanced Materials Forum III T1 - The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics EP - 1570 VL - 514-516 DO - 10.4028/www.scientific.net/MSF.514-516.1566 UR - https://hdl.handle.net/21.15107/rcub_dais_11709 ER -
@conference{ author = "Pavlović, Vera P. and Nikolić, Maria Vesna and Spasojević, Vojislav and Blanuša, J. and Živković, Ljiljana and Stojanović, B. D. and Pavlović, Vladimir B. and Ristić, Momčilo M.", year = "2006", abstract = "In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.", publisher = "Durnten-Zurich : Trans Tech Publications Ltd.", journal = "Advanced Materials Forum III", title = "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics", pages = "1570", volume = "514-516", doi = "10.4028/www.scientific.net/MSF.514-516.1566", url = "https://hdl.handle.net/21.15107/rcub_dais_11709" }
Pavlović, V. P., Nikolić, M. V., Spasojević, V., Blanuša, J., Živković, L., Stojanović, B. D., Pavlović, V. B.,& Ristić, M. M.. (2006). The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Advanced Materials Forum III Durnten-Zurich : Trans Tech Publications Ltd.., 514-516. https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 https://hdl.handle.net/21.15107/rcub_dais_11709
Pavlović VP, Nikolić MV, Spasojević V, Blanuša J, Živković L, Stojanović BD, Pavlović VB, Ristić MM. The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Advanced Materials Forum III. 2006;514-516:null-1570. doi:10.4028/www.scientific.net/MSF.514-516.1566 https://hdl.handle.net/21.15107/rcub_dais_11709 .
Pavlović, Vera P., Nikolić, Maria Vesna, Spasojević, Vojislav, Blanuša, J., Živković, Ljiljana, Stojanović, B. D., Pavlović, Vladimir B., Ristić, Momčilo M., "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics" in Advanced Materials Forum III, 514-516 (2006), https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 ., https://hdl.handle.net/21.15107/rcub_dais_11709 .