Претраживање
Приказ резултата 11-20 од 24
Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
(Belgrade : ETRAN, 2020)
The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the ...
Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics
(Belgrade : ETRAN, 2020)
The influence of mechanical activation on the formation, sintering kinetics and morphology was investigated in sintered barium strontium titanate (BST) ceramics with different Ba-to-Sr ratios. Initial powders were mechanically ...
The Analysis of the Nucleation Process of the Lithium Germanium Phosphate Glass
(Science of Sintering, 2022)
The nucleation process of lithium germanium-phosphate glass was studied to determine the temperature range of nucleation and the temperature of the maximum nucleation rate. The differential thermal analysis (DTA), and ...
Fabrication of Ceramic Monoliths from Diatomaceous Earth: Effects of Calcination Temperature on Silica Phase Transformation
(Science of SinteringScience of Sintering, 2022)
The raw diatomaceous earth from the vicinity of Bitola (North Macedonia) showed low bulk density (0.61–0.69 g/cm3), high-water absorption (75–81%) and porosity (66–72%). The chemical composition was determined with ICP-MS, ...
Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics
(Science of Sintering, 2022)
In this study, microstructure evolution and dielectric properties of SrTiO3 ceramic have been investigated, whereby mechanical activation of SrTiO3 powders was used to modify the functional properties of ceramic materials. ...
Electronic properties of BZT nano-ceramic grades at low frequency region
(Belgrade : ETRAN, 2023)
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective molar ratio to form Ba(Zr0.10Ti0.90)O3 via solid state reaction at elevated temperature. The prepared BZT was milled in the ...
Morphological and Structural Characterization of MgAl2O4 Spinel
(ETRAN, 2023)
Magnesium aluminate has the spinel structure along with good mechanical, chemical, and thermal properties. Magnesium aluminate has a wide range of applications including refractory ceramics, optically transparent ceramic ...
Oxide Powder Mixture with Poly-vinyl Alcohol (PVA) and added Polyethylene Glycol (PEG) as Plasticizer
(Belgrade : Association for ETRAN Society, 2023)
Powder mixture consisted of ZnO, Mn2O3 (MnCO3) and Fe2O3 blended powders, was found laminating during compaction. Polyvinyl alcohol (PVA) and a combination of PVA with polyethylene glycol (PEG) added as a plasticizer, were ...
Characterization of NTC thick film thermistor paste Cu0.2Ni0.5Zn1.0Mn1.3O4
(Belgrade : ETRAN, 2023)
A powder of Cu0.2Ni0.5Zn1.0 Mn1.3O4 composition for custom thermistor was prepared by using the respective mixture of metal oxides and solid state reaction at 1000 °C/4h in air. The obtained thermistor powder was milled ...
Structural features of near equiatomic FeCo-2V semi-hard magnetic alloy prepared by MIM technology
(Belgrade : ETRAN, 2023)
The structural properties of a magnetically semi-hard near equiatomic FeCo-2wt%V (FeCoV) alloy produced by Powder Injection Moulding (PIM) (option by fine metal powder - Metal Injection Moulding (MIM) technology) were ...