Претраживање
Приказ резултата 101-110 од 114
Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
(Belgrade : Materials Research Society of Serbia, 2017)
In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated ...
Microstructural changes initiated by sintering of refractory concrete based on recycled bauxite aggregate
(Kiev : National Academy of Sciences of Ukraine (NASU); Frantsevych Institute for Problems of Materials Science of NASU; National Technical University of Ukraine "KPI"; Ukrainian Materials Science Society; INTEM LTD, 2012)
Concretes whose structure and final properties are shaped during thermal pre-treatment or during life-service at elevated temperatures can be applied as construction material for thermal insulation and/or refractory linings ...
Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics
(Belgrade : Materials Research Society of Serbia, 2015)
Due to specific dielectric and ferroelectric properties, functional ceramics based on barium titanate (BaTiO3) have found application in semiconductor industries. Appropriate electrical properties of barium titanate-based ...
Hydroxyapatite sintering in the presence of LiFePO4
(Belgrade : Materials Research Society of Serbia, 2014)
Sintering of hydroxyapatite attracts attention for decades with the final aim to obtain reliable materials for bio-applications. Various kind of sintering techniques as well as sintering additives were investigated to ...
The fractal nature approach in ceramics materials and discrete field simulation
(ETRAN, 2018)
In this paper, we present experimental data of static fractals and compare the results with theoretical analysis obtained using dynamic particle simulation. The fractal simulator presented in this manuscript is pioneer ...
Advantages of combined sintering compared to conventional sintering of mechanically activated magnesium titanate
(Belgrade : International Institute for the Science of Sintering, 2014)
In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were ...
Mechanical properties and microstructure fractal analysis of refractory bauxite concrete
(Belgrade : International Institute for the Science of Sintering, 2015)
The surface topography analysis via fractals as a means of explanation of composite materials mechanical and microstructural characteristics has hardly been reported so far. This study proposes a method of fractal analysis ...
Influence of mechanical activation on electrical properties of barium–zinc–titanate ceramics sintered at 1100°C
(Springer US, 2012)
Starting mixtures of BaCO3, ZnO, and TiO2 powders are mechanically activated in a planetary ball mill for various periods of time. The powders obtained are sintered isothermally at 1100°C for 120 min. Non-isothermal sintering ...
Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3)
(Belgrade : Serbian Ceramic Society, 2017)
The initial powder (16 % Fe2O3, 4 % BaCO3, 80 % BaTiO3) was mechanically activated in a planetary mill for 20, 80, 120, 160, 200 and 220 minutes in air. Modified Faraday method was used to perform magnetization measurements ...
Sintering effects on microstructure and dielectric properties of CCTO ceramics
(Belgrade : Materials Research Society of Serbia, 2012)
A perovskite-type compound, calcium copper titanate (CaCu3Ti4O12, CCTO) attracted ever increasing attention for its practical applications in microelectronics, especially for preparation of capacitors and memory devices. ...