Претраживање
Приказ резултата 1-10 од 12
Structural and magnetic properties of Y1-xYbxF3 solid solution
(Belgrade : Serbian Ceramic Society, 2018)
In this work, the polycrystalline samples Y1-xYbxF3 (x = 0.01, 0.05, 0.1, 0.25, 0.5, 0.75 and 1) were synthesized and characterized by X-ray powder diffraction and magnetic measurements. In the first stage of synthesis, ...
The Influence of Synthesis Parameters and Heat Effect on Magnetic Properties of Powder System FexOy - BaTiO3
(Belgrade : Serbian Ceramic Society, 2015)
Powder mixture of 60 mass % of iron (Fe) and 40 mass % of barium titanate (BaTiO3) has been activated in planetary mill for 100, 120, 150, 180, 210 and 240 min in the air. During the activation the iron powder transits ...
Structural and magnetic properties of mechanochemically synthesized nanosized yttrium titanate
(Belgrade : Association of the Chemical Engineers of Serbia, 2012)
Nanosized perovskite YTiO3 with the mean crystallite size of 18 nm was synthesized for the first time by mechanochemical treatment. The mechanochemical solid state reaction between commercial Y2O3 powder and mechanochemically ...
Magnetic properties of nickel manganite obtained by a complex polymerization method
(Belgrade : Institute for Multidisciplinary Research, 2015)
Spinel materials based on Mn and Ni has been intensively studied over the past years due to their excellent semiconductor properties. Nickel manganite as NTC thermistor is widely used today in different industrial sectors. ...
Generalized Lorentz model description-Caputo-Fabrizio fractional derivative approach, of electrical, dielectric, conductive and magnetic processes in materials
(Belgrade : Serbian Ceramic Society, 2019)
In this study, generalized Lorentz model is basic one-particle model in the framework of dielectric, conductive and/or magnetic responses of materials.
AC conductivity studies of various BaTiO3 or similar ceramics produced ...
Influence of starting powder milling on magnetic properties of Mn-Zn ferrite
(Novi Sad : Faculty of Technology, University of Novi Sad, 2017)
In this paper, the influence of additional sieving and milling of starting industrial Mn-Zn powders on magnetic properties was investigated. The starting powder was milled for 60 minutes, followed by sieving through 325 ...
The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder
(Belgrade : Materials Research Society of Serbia, 2016)
Low intrinsic electronic conductivity is the main weakness of LiFePO4 for the use as cathode material in lithium ion batteries. Here is presented an experimental proof of the theoretical prediction that fluorine doping of ...
The thermal and magnetic properties of the Fe89.8Ni1.5Si5.2B3C0.5 and Fe81B13Si14C2 amorphous alloys
(Belgrade : Institute for the Science of Sintering, 2015)
This paper investigates the thermal and magnetic properties of two iron based amorphous alloys with different Fe-content: Fe89.8Ni1.5Si5.2B3C0.5 and Fe81B13Si14C2. The XRD results show that the thermal induced structural ...
Comprehensive characterization of BiFeO3 powder synthesized by the hydrothermal procedure
(Novi Sad Faculty of Technology, University of Novi Sad, 2016)
In this paper, bismuth ferrite (BFO) particles synthesized by controlled hydrothermal process, where the particles of small sizes and with high purity were obtained. Structural analysis showed that non-annealed powder can ...
Synthesis of BaFe12O19-BaTiO3 multiferroics by mechanical activation
(Belgrade : Serbian Ceramic Society, 2017)
A mixture of polycrystalline powders of Fe (70 % wt.) and BaTiO3 (30 % wt.) was ball-milled in a planetary mill under air atmosphere, for different time intervals: 60, 120, 180, 240, 300 and 360 min. During the mechanical ...