Претраживање
Приказ резултата 1-10 од 34
Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics
(Elsevier, 2016)
The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a ...
Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors
(IEEE, 2017)
Pseudobrookite thick films were obtained by screen printing paste composed of a 1:1.5 molar ratio mixture of starting nanopowders of hematite and anatase, glass frit and organic binder. The films were deposited on alumina ...
Sintering of Zinc-Titanate
(Atlantis Press, 2016)
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 min. Formal ...
Influence of mechanical activation on functional properties of barium hexaferrite ceramics
(Elsevier, 2018)
Barium hexaferrite ceramics were prepared using mechanically activated mixtures of iron and barium titanate. The 60:40 mass% Fe:BaTiO3 powder mixtures were mechanically activated for different times (100–240 min) and ...
Designing, fabrication and characterization of nanostructured functionally graded HAp/BCP ceramics
(Elsevier, 2015)
Nanostructured calcium phosphate functionally graded materials (FGMs) with simultaneous gradients of density, phase composition, and mechanical properties were fabricated by consecutive uniaxial pressing of stoichiometric ...
Electrical properties of barium titanate stannate functionally graded materials
(Elsevier, 2010)
Barium titanate stannate (BTS) functionally graded materials (FGMs) with different tin/titanium concentration gradient were prepared by the powder-stacking method and uniaxially pressing process, followed by sintering. ...
Humidity sensing potential of Fe2TiO5—pseudobrookite
(Springer US, 2018)
Bulk samples of pseudobrookite with an orthorhombic crystal structure were prepared by sintering a mixture of starting hematite and anatase nano powders in the weight ratio 60:40 at three different sintering temperatures ...
Synthesis of Cordierite-Based Ceramics : monograph
(Belgrade : Academic Mind, 2016)
Advanced ceramic materials include a large number of new materials, which are very different by their nature. These materials are the result of the demands of modern technologies for operation at high temperatures and ...
Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities
(Elsevier, 2017)
In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ...
Artificial fly ash based aggregates properties influence on lightweight concrete performances
(Elsevier, 2015)
The effect of the application of pelletized fly ash based aggregates obtained through different processing techniques on the behavior of lightweight concretes was analyzed. Experimental program implied production of four ...