TY  - CONF
AU  - Pavlović, Vladimir B.
AU  - Wu, M.
AU  - Đoković, Vladimir
AU  - Dukić, M.
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
PY  - 2014
UR  - https://dais.sanu.ac.rs/123456789/612
AB  - It is well known that materials used in nano-electro-mechanical systems (NEMS) must simultaneously satisfy numerous requirements for chemical, structural, mechanical and electrical properties. Taking into account that the application of targeted synthesis principles is fundamental for development of these materials, in this article the results of the investigation of the nano-scale grain size effects, grain/particle size induced structural transformations, the evolution of the particle structure during targeted synthesis process and microstructure modeling of ceramic-polymer nanocomposites, has been presented. The nanocomposite BT,ST/PVDF films were prepared by pulsed laser deposition (PLD) method and investigated by X-ray diffraction (XRD) method and Raman spectroscopy, while the microstructure morphology has been analyzed by scanning electron microscope (SEM). It was found that PLD of BT,ST on PVDF substrate offers a new set of opportunities for development of advanced flexible piezo-films for the next generation of NEMS, which applications span the aero-space industry, communications, defense systems, national security, health care, information technology and environmental monitoring.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
T1  - Targeted Synthesis of Ceramic-Polymer Nanocomposites
SP  - 125
EP  - 125
UR  - https://hdl.handle.net/21.15107/rcub_dais_612
ER  - 

@conference{
author = "Pavlović, Vladimir B. and Wu, M. and Đoković, Vladimir and Dukić, M. and Pavlović, Vera P. and Vlahović, Branislav",
year = "2014",
abstract = "It is well known that materials used in nano-electro-mechanical systems (NEMS) must simultaneously satisfy numerous requirements for chemical, structural, mechanical and electrical properties. Taking into account that the application of targeted synthesis principles is fundamental for development of these materials, in this article the results of the investigation of the nano-scale grain size effects, grain/particle size induced structural transformations, the evolution of the particle structure during targeted synthesis process and microstructure modeling of ceramic-polymer nanocomposites, has been presented. The nanocomposite BT,ST/PVDF films were prepared by pulsed laser deposition (PLD) method and investigated by X-ray diffraction (XRD) method and Raman spectroscopy, while the microstructure morphology has been analyzed by scanning electron microscope (SEM). It was found that PLD of BT,ST on PVDF substrate offers a new set of opportunities for development of advanced flexible piezo-films for the next generation of NEMS, which applications span the aero-space industry, communications, defense systems, national security, health care, information technology and environmental monitoring.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014",
title = "Targeted Synthesis of Ceramic-Polymer Nanocomposites",
pages = "125-125",
url = "https://hdl.handle.net/21.15107/rcub_dais_612"
}

Pavlović, V. B., Wu, M., Đoković, V., Dukić, M., Pavlović, V. P.,& Vlahović, B.. (2014). Targeted Synthesis of Ceramic-Polymer Nanocomposites. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
Belgrade : Serbian Ceramic Society., 125-125.
https://hdl.handle.net/21.15107/rcub_dais_612

Pavlović VB, Wu M, Đoković V, Dukić M, Pavlović VP, Vlahović B. Targeted Synthesis of Ceramic-Polymer Nanocomposites. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014. 2014;:125-125.
https://hdl.handle.net/21.15107/rcub_dais_612 .

Pavlović, Vladimir B., Wu, M., Đoković, Vladimir, Dukić, M., Pavlović, Vera P., Vlahović, Branislav, "Targeted Synthesis of Ceramic-Polymer Nanocomposites" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014 (2014):125-125,
https://hdl.handle.net/21.15107/rcub_dais_612 .

TY  - CONF
AU  - Pavlović, Vera P.
AU  - Wu, M.
AU  - Đoković, Vladimir
AU  - Dukić, M.
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - https://dais.sanu.ac.rs/123456789/429
AB  - Piezoelectric materials play an important role in development of advanced Micro-electromechanical systems (MEMS) and Nano-electro-mechanical systems (NEMS). Their applications span the aero-space industry, communications, defense systems, national security, health care, information technology and environmental monitoring. Materials used in MEMS/NEMS mustsimultaneously satisfy numerous requirements for chemical, structural, mechanical and electrical properties. Although traditionally MEMS in particular have relied on silicon, the materials used in MEMS/NEMS are becoming more heterogeneous. Taking into account that materials nanostructuring can produce unique mechanical, electrical and piezoelectric properties, in this article the investigation of pulsed laser deposition of BaTiO3 on PVDF substrate has been performed. The titanium-saphire laser operated at 800 nm with 40-fs pulse duration and 1 kHz repetition rate was focused onto a mechanically activated BaTiO3 target. Deposition on PVDF substrate was done at an oxygen partial pressure of 10-7 Torr using a laser pulse frequency of 1 kHz at room temperature. The crystal structure and the microstructure of the films were examined using an X-ray diffractometer and scanning electron microscope, while the surface morphology was observed by atomic force microscopy.It was found that pulsed laser deposition of BaTiO3 on PVDF substrate offers a new set of opportunities for development of advanced flexible piezo-films for the next generation of NEMS.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
T1  - Pulsed Laser Deposition of BaTiO3 on PVDF substrate
SP  - 48
EP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_dais_429
ER  - 

@conference{
author = "Pavlović, Vera P. and Wu, M. and Đoković, Vladimir and Dukić, M. and Pavlović, Vladimir B.",
year = "2013",
abstract = "Piezoelectric materials play an important role in development of advanced Micro-electromechanical systems (MEMS) and Nano-electro-mechanical systems (NEMS). Their applications span the aero-space industry, communications, defense systems, national security, health care, information technology and environmental monitoring. Materials used in MEMS/NEMS mustsimultaneously satisfy numerous requirements for chemical, structural, mechanical and electrical properties. Although traditionally MEMS in particular have relied on silicon, the materials used in MEMS/NEMS are becoming more heterogeneous. Taking into account that materials nanostructuring can produce unique mechanical, electrical and piezoelectric properties, in this article the investigation of pulsed laser deposition of BaTiO3 on PVDF substrate has been performed. The titanium-saphire laser operated at 800 nm with 40-fs pulse duration and 1 kHz repetition rate was focused onto a mechanically activated BaTiO3 target. Deposition on PVDF substrate was done at an oxygen partial pressure of 10-7 Torr using a laser pulse frequency of 1 kHz at room temperature. The crystal structure and the microstructure of the films were examined using an X-ray diffractometer and scanning electron microscope, while the surface morphology was observed by atomic force microscopy.It was found that pulsed laser deposition of BaTiO3 on PVDF substrate offers a new set of opportunities for development of advanced flexible piezo-films for the next generation of NEMS.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade",
title = "Pulsed Laser Deposition of BaTiO3 on PVDF substrate",
pages = "48-49",
url = "https://hdl.handle.net/21.15107/rcub_dais_429"
}

Pavlović, V. P., Wu, M., Đoković, V., Dukić, M.,& Pavlović, V. B.. (2013). Pulsed Laser Deposition of BaTiO3 on PVDF substrate. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
Belgrade : Serbian Ceramic Society., 48-49.
https://hdl.handle.net/21.15107/rcub_dais_429

Pavlović VP, Wu M, Đoković V, Dukić M, Pavlović VB. Pulsed Laser Deposition of BaTiO3 on PVDF substrate. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade. 2013;:48-49.
https://hdl.handle.net/21.15107/rcub_dais_429 .

Pavlović, Vera P., Wu, M., Đoković, Vladimir, Dukić, M., Pavlović, Vladimir B., "Pulsed Laser Deposition of BaTiO3 on PVDF substrate" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade (2013):48-49,
https://hdl.handle.net/21.15107/rcub_dais_429 .