Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment
2011
Аутори
Marković, R.Jugović, Branimir
Gvozdenović, Milica M.
Stevanović, Jasmina S.
Stevanović, Z.
Bugarin, Mile
Остала ауторства
Markoš, JozefКонференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.
Кључне речи:
non-standard copper anodes / electrorefining / sulphur acidic waste solution / alloying elementsИзвор:
Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering, 2011, 972-975Издавач:
- Tatranské Matliare : Slovak Society of Chemical Engineering
Финансирање / пројекти:
- Утицај рударског отпада из РТБ-а Бор на загађење водотокова са предлогом мера и поступака за смањење штетног дејства на животну средину (RS-MESTD-Technological Development (TD or TR)-37001)
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Marković, R. AU - Jugović, Branimir AU - Gvozdenović, Milica M. AU - Stevanović, Jasmina S. AU - Stevanović, Z. AU - Bugarin, Mile PY - 2011 UR - https://dais.sanu.ac.rs/123456789/551 AB - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process. PB - Tatranské Matliare : Slovak Society of Chemical Engineering C3 - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering T1 - Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment SP - 972 EP - 975 UR - https://hdl.handle.net/21.15107/rcub_dais_551 ER -
@conference{ author = "Marković, R. and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Stevanović, Z. and Bugarin, Mile", year = "2011", abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.", publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering", journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering", title = "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment", pages = "972-975", url = "https://hdl.handle.net/21.15107/rcub_dais_551" }
Marković, R., Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Stevanović, Z.,& Bugarin, M.. (2011). Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering Tatranské Matliare : Slovak Society of Chemical Engineering., 972-975. https://hdl.handle.net/21.15107/rcub_dais_551
Marković R, Jugović B, Gvozdenović MM, Stevanović JS, Stevanović Z, Bugarin M. Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:972-975. https://hdl.handle.net/21.15107/rcub_dais_551 .
Marković, R., Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Stevanović, Z., Bugarin, Mile, "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):972-975, https://hdl.handle.net/21.15107/rcub_dais_551 .