Претраживање
Приказ резултата 41-50 од 114
Structural and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures
(Elsevier, 2014)
Starting nanopowders of TiO2 (anatase 99.7%) and α-Fe2O3 (hematite) were mixed in the weight ratios 60:40 and 40:60. Green samples were sintered in the temperature range 750–1250 °C in air. Structural, morphological and ...
Nanostructured Fe2O3/TiO2 thick films: Analysis of structural and electronic properties
(Elsevier, 2015)
Thick films using starting nanopowders of TiO2 (anatase 99.7%) and α-Fe2O3 (hematite) mixed in the weight ratios 60:40 and 40:60 for thick film paste were fabricated by screen printing technology on an alumina substrate. ...
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of γ to α phase transformation mechanism
(Elsevier, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
Fractal nature Heywang model contribution and BaTiO3-ceramics semiconducting phenomena
(Belgrade : Serbian Ceramic Society, 2018)
Well known material with ferroelectric properties, BaTiO3-ceramics, have many advanced applications. Fractal approach in analyzing of these structures can be one of the solution for investigation of morphology. It is known ...
The influence of powder characteristics on two-step sintering behavior of hydroxyapatite
(Belgrade : Institute of Technical Sciences of SASA, 2010)
Fabrication of full dense ceramic materials on the basis of hydroxyapatite (HAp) and biphasic calcium phosphate (BCP) with controllable microstructural and compositional characteristics attracts considerable efforts. Various ...
Barium-zinc-titanate ceramics
(Kiev : National Academy of Sciences of Ukraine (NASU); Frantsevych Institute for Problems of Materials Science of NASU; National Technical University of Ukraine "KPI"; Ukrainian Materials Science Society; INTEM LTD, 2010)
Starting mixtures of BaCO3, ZnO and TiO2 powders were mechanically activated in a planetary ball mill for various periods of time. The powders obtained were sintered nonisothermally to temperatures between 1100 and 1300°C ...
Tesla's Fountain – Modeling and simulation in ceramics technology
(Elsevier, 2018)
In this paper, we present Tesla's Fountain in ceramics technology reconstruction from basic 3D model, simulation of the engine, light and fluids till the real materialization. As the one of the most important model purposes, ...
Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
(Springer Netherlands, 2015)
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of ...
Structural characterization and electrical properties of sintered magnesium-titanate ceramics
(Belgrade : Materials Research Society of Serbia, 2012)
In this article the influence of ball milling process on structure of MgO-TiO2 system, along with its influence on electrical properties of post-sintering samples, were investigated. Mixtures of MgO-TiO2 powders were ...
Microstructure evolution and sintering kinetics of ZnO
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The aim of this paper was to analyse the sintering kinetics and microstructure evolution of ZnO. Powder was isothermally sintered (15, 30, 60, 90 and 120 minutes) in the temperature range from 800 to 1200oC. The values of ...