Search
Now showing items 11-20 of 38
The influence of mechanical activation on structural evolution of nanocrystalline SrTiO3 powders
(Elsevier, 2017)
Structural changes caused by mechanical activation of SrTiO3 powders were investigated using a variety of methods. Average crystallite size continuously decreased with increased activation time to around 20 nm after 120 ...
Electrical properties of mechanochemically activated cordierite ceramics
(Springer, 2012)
Three-component oxide mixtures were prepared containing MgO, Al 2 O 3 and SiO 2 in a 2 : 2 : 5 ratio with addition of 10% Bi 2 O 3. The mixtures were mechanically activated in a range from 5 to 240 min in a mill with ceramic ...
Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
(Springer Netherlands, 2015)
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of ...
Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive
(Elsevier, 2012)
Due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅ 5SiO2, is a very attractive high-temperature ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
Structural Investigation of Mechanically Activated Nanocrystalline BaTiO3 Powders
(Elsevier, 2011)
In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy ...
Reaction sintering of the 2ZnO-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2007)
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 minutes. ...
Influence of mechanical activation on synthesis of zinc metatitanate
(Belgrade : International Institute for the Science of Sintering, 2005)
Investigations of a ZnO-TiO2 binary oxide mixture during mechanical treatment were mainly focused on obtaining orthotitanate Zn2TiO4 with a spinel structure. Due to the specific way of energy transfer during mechanical ...
Far infrared reflectance of sintered Zn2TiO4
(Springer Science+Business Media, 2008)
Zinc-titanate ceramics were obtained by initial mechanical activation in a high-energy planetary mill for 15 min followed by sintering at temperatures 900-1100°C for 2 h. Room temperature far infrared reflectivity spectra ...
The synthesis: Structure relationship in the ZnO-Cr2O3 system
(Belgrade : International Institute for the Science of Sintering, 2004)
In this work the development of the spinel phase in the ZnO-Cr2O3 system was discussed from the viewpoint of the synthesis-structure relationship. The nanostructure evolution in particles obtained either via solution-based ...