Search
Now showing items 1-10 of 49
Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics
(Elsevier, 2016)
The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a ...
The Influence of Temperature on Microstructure Contact Surfaces on BaTiO3 –ceramics Doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2014)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Preparation and properties of polymeric and composite bioresorbable barrier membranes
(Progress in Advanced Materials and Processes, 5th Conference of the Yugoslav-Materials-Research-Society (Yu-MRS 2003), Sep 15-19, 2003, Herceg Novi, Yugoslavia, 2004)
Bioresorbable barrier membranes have been widely used in dentistry and maxillofacial surgery. When the membranes are placed over bony defects and are closely adapted by the surrounding bone face, an environment that prevents ...
Electronic ceramic structure within the Voronoi cells model and microstructure fractals contacts surfaces new frontier applications
(Belgrade : International Institute for the Science of Sintering, 2013)
In this study, in order to establish grain shapes of sintered ceramics, new approach on correlation between microstructure and doped BaTiO3 -ceramics properties based, on Voronoi model and mathematical statistics calculations ...
The Fractal Nature Grains Shape Reconstruction on the Way to Microstructure Prognosis
(Belgrade : Serbian Ceramic Society, 2014)
The structure of BaTiO3 based ceramics materials, can be controlled by using different pressing pressures, sintering temperatures and different additive concentrations. In this paper, microstructure properties of Ho2O3 ...
Composition of red mud and/or metakaolin-based modified geopolymers
(Belgrade : Materials Research Society of Serbia, 2017)
There is potential use of red mud for synthesis of inorganic polymeric materials through a geopolymerization process as an alternative in the sectors of construction and building materials. By introducing of inorganic and ...
Geometrical and electrical properties of NTC polycrystalline thermistors vs. Changes of sintering parameters
(Belgrade : International Institute for the Science of Sintering, 2006)
NTC thermistor powder was made of a Mn, Ni, Fe and Co oxide mixture calcinated at 1050°C / 60 min. The powder was milled in a ball mill down to an average particle diameter of 0.9 μm. Small disc shaped pills of the powder ...
The fractal nature materials microstructure influence on electrochemical energy sources
(Belgrade : International Institute for the Science of Sintering, 2015)
With increasing of the world energy crisis, research for new, renewable and alternative energy sources are in growth. The focus is on research areas, sometimes of minor importance and applications, where the different ...
Microstructure and dielectric properties of BaTiO3 doped with Er2O3, Yb2O3 and Ho 2O3
(Faenza : ISTEC-CNR, 2008)
Doped barium-titanate ceramic is attracting much interest for its application as resistors with a positive temperature coefficient of resistivity (PTCR), multilayer ceramic capacitors (MLCC), thermal sensors etc. In this ...