Search
Now showing items 1-10 of 28
The influence of mechanical activation on sintering process of BaCO3-SrCO3-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2012)
In this article the influence of mechanical activation on sintering process of bariumstrontium-titanate ceramics has been investigated. Both non-activated and mixtures treated in a planetary ball mill for 5, 10, 20, 40, ...
Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics
(Belgrade : International Institute for the Science of Sintering, 2013)
Mechanical activation is a commonly used and relatively fast and inexpensive procedure for sample preparation before the sintering process. Cordierite, a stoichiometric mixture of three different oxides (2MgO⋅2Al2O3⋅5SiO2) ...
The influence of mechanical activation on structural evolution of nanocrystalline SrTiO3 powders
(Elsevier, 2017)
Structural changes caused by mechanical activation of SrTiO3 powders were investigated using a variety of methods. Average crystallite size continuously decreased with increased activation time to around 20 nm after 120 ...
Microstructural and electrical properties of cordierite-based ceramics obtained after two-step sintering technique
(Science of Sintering, 2016)
Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, ...
Shungite – a carbon-mineral rock material: Its sinterability and possible applications
(Novi Sad : Faculty of Technology, University of Novi Sad, 2019)
The paper presents results of the influence of mechanical activation of shungite, a carbon-mineral rock material rich in silica and carbon, on its sintering behaviour, and obtaining of pure SiC ceramics. The mechanical ...
Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite
(Royal Society of Chemistry, 2017)
Mechanical milling of commercial ZnO and SnO2 was used to produce a ZnO/SnO2 composite with a high density of surface defects; in particular, zinc interstitials (Zni) and oxygen vacancies (VO). To determine the impact of ...
Uticaj mehaničke energije na komponente MgO-Al2O3-SiO2-TiO2 sistema
(Beograd : Savez inženjera i tehničara Srbije, 2012)
U ovom radu je ispitivan uticaj mehaničke energije na strukturu i promene u mikrostrukturi sistema MgO-Al2O3-SiO2-TiO2. Utvrđeno je da mehanička energija pospešuje homogenizaciju polaznih komponenti, utiče na veličinu i ...
Sintering of the mechanically activated MgO-TiO2 system
(Hanyang University Press, 2013)
Mixtures of MgO-TiO2 powders were mechanically activated in a planetary ball mill for a time interval from 0 to 120 minutes. The influence of the mechanical activation on the phase composition and crystal structure have ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive
(Elsevier, 2012)
Due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅ 5SiO2, is a very attractive high-temperature ...