Pretraživanje
Prikaz rezultata 1-8 od 8
Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors
(IEEE, 2017)
Pseudobrookite thick films were obtained by screen printing paste composed of a 1:1.5 molar ratio mixture of starting nanopowders of hematite and anatase, glass frit and organic binder. The films were deposited on alumina ...
Sintering of Zinc-Titanate
(Atlantis Press, 2016)
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 min. Formal ...
The Influence of Sintering Parameters and Subsequent Thermal Treatment on U-I Characteristics and Degradation of ZnO Varistors
(New York; London : Plenum Press, 1987)
The fabrication of varistor ceramics, characterized by stable electrical properties, was considered on the basis of sintering parameters and subsequent thermal treatment. The process of accelerated degradation of electrical ...
Microwave Electro Ceramic Based on Magnesium Titanate Compounds
(Paris : Atlantis Press, 2017)
The intensive progress in electronics, especially telecommunication and mobile phone in 1990s, was the main driving force for the extensive research and development of microwave ceramics. These materials are often used in ...
Environmental Aspects of Red Mud and Its Utilization as a Component of Building Materials
(Paris : Atlantis Press, 2017)
The Bayer process is the main industrial process covering 90 % of global production of alumina. The sintering process deals with the medium and low grades of bauxite resource. During the alumina production process, red mud ...
Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3
(Abingdon : Taylor & Francis Ltd., 2005)
Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of ...
The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
(Durnten-Zurich : Trans Tech Publications Ltd., 2006)
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., ...
Enhancing Synthesis and Sintering of Zinc Titanate Using Mechanical Activation
(Progress in Advanced Materials and Processes, 2004)
Mechanical activation and sintering are used for obtaining zinc titanate, Zn2TiO4. Starting powder mixtures of ZnO and TiO2, in the molar ratio that is in accordance with the stoichiometry ofzinc titanate Zn2TiO4, were ...