Concretes whose structure and final properties are shaped during thermal pre-treatment or during life-service at elevated temperatures can be applied as construction material for thermal insulation and/or refractory linings ...

In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated ...

Poster presented at the Workshop: Processing of Nanostructured Ceramics, Polymers, and Composites, Faculty of Technology and Metallurgy, University of Belgrade, November 29–30, 2010

Poster presented at the conference Advanced Ceramics and Application I - Serbian Ceramic Society, Belgrade May 10-11, 2012

In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...

Improving of material characteristics could be achieved in different ways, but it is always connected with the issue of impairing the other functional properties. Hydroxyapatite bioceramics lacks of insufficient mechanical ...

Complex compounds with oxide phases of Ba, 2n, and 11 are widely used in instrument engineering. It is also important to find such production routes for ceramics, which provide their stable structure and properties. Phase ...

Poster presented at the Adriatic School of Nanoscience – ASON-1, Dubrovnik, Croatia, September 19–23, 2010

Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier ...

In this paper reduction of the specifice surface area of porous ZnO during sintering was analyzed. ZnO was sintered at temperatures from 673K to 1173K. Reduction of the specific surface area was observed as a function of ...