Search
Now showing items 1-10 of 137
Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate
(Journal of the European Ceramic Society, 2018)
The present study describes sintering behaviour of hydroxyapatite (HAp) upon addition of lithium iron phosphate (LFP) (1-10 wt.%) system in inert (Ar) atmosphere. The interaction between materials and melting of LFP ...
Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics
(Elsevier, 2016)
The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a ...
Microstructural changes initiated by sintering of refractory concrete based on recycled bauxite aggregate
(Kiev : National Academy of Sciences of Ukraine (NASU); Frantsevych Institute for Problems of Materials Science of NASU; National Technical University of Ukraine "KPI"; Ukrainian Materials Science Society; INTEM LTD, 2012)
Concretes whose structure and final properties are shaped during thermal pre-treatment or during life-service at elevated temperatures can be applied as construction material for thermal insulation and/or refractory linings ...
Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
(Elsevier, 2019)
Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
(Belgrade : Materials Research Society of Serbia, 2017)
In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated ...
Sintering of different hydroxyapatite nanopowders
(2010)
Poster presented at the Workshop: Processing of Nanostructured Ceramics, Polymers, and Composites, Faculty of Technology and Metallurgy, University of Belgrade, November 29–30, 2010
Shungite – a carbon-mineral rock material: Its sinterability and possible applications
(Novi Sad : Faculty of Technology, University of Novi Sad, 2019)
The paper presents results of the influence of mechanical activation of shungite, a carbon-mineral rock material rich in silica and carbon, on its sintering behaviour, and obtaining of pure SiC ceramics. The mechanical ...
Mechanical activation as sintering pre-treatment of talc for steatite ceramics
(Belgrade : Interenational Institute for the Science of Sintering, 2014)
The effect of vibratory mill induced mechanical activation on the change of the particle size, crystallinity and the phase transformations of the minerals present in the activated material, was studied with the purpose of ...
Hydroxyapatite nanopowders prepared in the presence of zirconium ions
(Elsevier, 2014)
Hydroxyapatite nanopowders were prepared in the presence of different concentrations of zirconium ions. Such crystallization conditions yielded significantly reduced particle size and increased specific surface area. Cell ...