Претраживање
Приказ резултата 1-9 од 9
Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics
(Elsevier, 2016)
The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a ...
Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate
(Journal of the European Ceramic Society, 2018)
The present study describes sintering behaviour of hydroxyapatite (HAp) upon addition of lithium iron phosphate (LFP) (1-10 wt.%) system in inert (Ar) atmosphere. The interaction between materials and melting of LFP ...
Densification rate and phase structure changes during sintering of zinc titanate ceramics
(Elsevier, 2009)
Densification rate and phase structure changes during sintering of nanosized ZnTiO3 were studied. Sintering was performed in a dilatometer in two regimes: the first to 900 °C (heating rates 5, 10 and 15 °C/min) and the ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Peculiarities in sintering behavior of Ca-deficient hydroxyapatite nanopowders
(Elsevier, 2012)
We report unusual sintering behavior of Ca-deficient hydroxyapatite processed with different heating rates; particularly, faster heating resulted in higher densification. We hypothesize that faster heating delays formation ...
Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics
(Elsevier, 2014)
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated regarding their microstructural and dielectric characteristics. The content of 0.05 at% Mn was constant in all the ...
Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3
(Abingdon : Taylor & Francis Ltd., 2005)
Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of ...
Densification, Microstructure, and Electrical Properties of BaTiO3 (BT) Ceramics Prepared from Ultrasonically De-Agglomerated BT Powders
(Taylor & Francis, 2009)
In this study, a correlation between densification, microstructure, and electrical properties of BaTiO3 (BT) ceramics prepared from ultrasonically de-agglomerated BT powders has been analyzed. BT powders with the same ...
Niobium doping effect on BaTiO3 structure and dielectric properties
(Elsevier, 2020)
The effect of Nb on the microstructure and dielectric properties of BaTiO3 ceramics was investigated. The Nb/Mn–BaTiO3 ceramics were prepared using a conventional solid-state method. The concentration of Nb varied from 0.1 ...