Претраживање
Приказ резултата 31-40 од 197
The master sintering curves for BaTi0.975Sn0.025O3/BaTi0.85S n0.15O3 functionally graded materials
(Elsevier, 2009)
The most important aim in the design and processing of functionally graded materials (FGMs) is to produce devices free from any deformation. Smart choices of different combination of graded layers, as well as the heating ...
Rapid formation of high Tc phase in Bi-Pb-Sr-Ca-Cu-O system
(Elsevier, 2000)
The preparation of high purity 140nm sized Bi-Pb-Sr-Ca-Cu-O particles is based on thermal decomposition of aerosol generated ultrasonically (at 1.7Mhz) from IM nitrate precursor which contain organic additive. Particle ...
Influence of different degradation medium on release of ascorbic acid from poly(D,L-lactide-co-glycolide) nano- and microspheres
(Springer, 2009)
The major goals of the present study were to examine the effects of the type of release medium on the resulting drug release kinetics and to get further insight into the underlying drug release mechanisms. Spherical micro ...
Nanostructured ZrO2 powder synthesized by ultrasonic spray pyrolysis
(Surface Review and Letters, 2007)
The synthesis of nanostructured zirconia particles from aqueous colloidal dispersion of zirconia (zirconia sol) was carried out by ultrasonic spray pyrolysis method. The morphology of these nanostructured particles was ...
Influence of mechanical activation on structural and electrical properties of sintered MgTiO3 ceramics
(Belgrade : International Institute for the Science of Sintering, 2009)
The aim of this work was to analyze the influence of mechanical activation on the MgCO3-TiO2 system. Mixtures of MgCO3-TiO2 were mechanically activated for 15, 30, 60 and 120 minutes in a planetary ball mill and after that ...
Structural and electrical properties of the 2Bi2O3·3ZrO2 system
(Journal of Solid State Chemistry, 2008)
Powder mixtures of α-Bi2O3 (bismite) and monoclinic m-ZrO2 (baddeleyite) in the molar ratio 2:3 were mechanochemically and thermally treated with the goal to examine the phases, which may appear during such procedures. The ...
Underpotential deposition of cadmium onto Cu(111) and Cu(110) from chloride containing solutions
(Belgrade : Serbian Chemical Society, 2001)
Underpotential deposition (UPD) of Cd onto the (111) and (110) faces of copper in chloride containing electrolyte has been investigated by cyclic voltammetry and the potentiostatic pulse technique. It was shown that the ...
LaMO3 (M = Mg, Ti, Fe) perovskite type oxides: Preparation, characterization and catalytic properties in methane deep oxidation
(Elsevier, 2008)
Two new series of perovskite-type oxides LaMO3 (M = Mg, Ti, Fe) with different ratio Mg/Fe (MF) and Ti/Fe (TF) in the B cation site were prepared by annealing the precursor, obtained by the mechanochemical activation (MCA) ...
Copper electrodeposition from a copper acid baths in the presence of PEG and NaCl
(Belgrade : Serbian Chemical Society, 2001)
Copper electrodeposition from copper acid solutions containing PEG and NaCl has been investigated onto Cu(111), Cu(100) and polycrystalline copper electrodes using polarization and EIS measurements. The adsorption of ...
Influence of mechanical activation on synthesis of zinc metatitanate
(Belgrade : International Institute for the Science of Sintering, 2005)
Investigations of a ZnO-TiO2 binary oxide mixture during mechanical treatment were mainly focused on obtaining orthotitanate Zn2TiO4 with a spinel structure. Due to the specific way of energy transfer during mechanical ...