Now showing items 1-10 of 65
Influence of mechanical activation on mechanical properties of PVDF-nanoparticle composites
Mechanical activation leads to the creation of new surfaces and decrease in particle size of the initial powder particles, which affects the crystallization of PVDF matrix. In addition, prolonged mechanical activation ...
The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...
Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel
(The Ceramic Society of Japan, 2019)
Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 ...
Analysis of the initial-stage sintering of mechanically activated SrTiO3
The initial-stage of sintering plays a significant role in determining the final microstructure that defines the main characteristics of electroceramics materials such as functional properties. In this article non-isothermal ...
Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive
(Belgrade : Materials Research Society of Serbia, 2011)
According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ...
The effect of Hot Isostatic Pressing on the MT sample densities
(Belgrade : Serbian Ceramic Society, 2015)
Mechanically activated powders (0, 10, 40, 80 and 160 minutes) were formed by isostatic pressure 300 MPa to cylindrical green bodies (φ 12 mm). First set of samples was sintered at 1300°C for 30 min in air (heating rate ...
Kinetics of thermally activated processes in cordierite-based ceramics
Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using ...
Structural, electrical and magnetic properties of mechanically activated manganese and zinc ferrite
(Belgrade : Institute for Multidisciplinary Research of the University of Belgrade, 2017)
Starting hematite (Fe2O3), zinc oxide (ZnO) and manganese carbonate (MnCO3) powders were homogenized in a planetary ball mill in stainless steel bowls with stainless steel balls for 15 min, calcined in air at 1000 C for ...
The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3
Poster presented at the conference Advanced Ceramics and Application II – Serbian Ceramic Society, Belgrade, September 30 – October 1, 2013
Influence of MoO3 on sintering temperature of mechanically activated MgO-Al2O3-SiO2 system
(Belgrade : Serbian Ceramic Society, 2013)
Cordierite, 2MgO⋅2Al2O3⋅5SiO2, is a very attractive high-temperature ceramic material, due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good ...