Search
Now showing items 1-10 of 33
Analiza osetljivosti debeloslojnih NTC termistora na promene temperature i protoka vazduha
(Čačak : University of Kragujevac, Faculty of Technical Sciences, 2006)
NTC termistori na bazi Mn, Ni, Co i Fe oksida za potrebe debeloslojnih senzora pripadaju oblasti istraživačkog i primenjenog rada sa ciljem realizacije senzora prilagođenih po obliku, prenosu toplote i brzini odziva fizičkim ...
Intrinsic resistivity of sintered Nickel Manganite vs. powder activation time and density
(Belgrade : International Institute for the Science of Sintering, 2008)
In this work the DC resistivity of sintered nickel manganite NiMn2O4 (NTC thermistor material) was studied as a function of additional powder activation time in a planetary ball mill (0, 5, 15, 30, 45 and 60 min). The ...
Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics
(Elsevier, 2009)
Starting mixtures of ZnO, TiO2 and MgO (0, 1.25 and 2.5 wt.% MgO) powders were mechanically activated for 15 min in a planetary ball mill. The powders obtained were sintered non-isothermally to temperatures between 800 and ...
Science of Sintering in the XXI Century : book of abstracts / X World Round Table Conference on Sintering
(Belgrade : Institute of Technical Sciences of SASA; International Institute for the Science of Sintering; Serbian Academy of Sciences and Arts, 2002)
Science of Sintering in the XXI Century : book of abstracts / X World Round Table Conference on Sintering [3-6 September 2002 Belgrade, Yugoslavia] ; [organized by] Serbian Academy of Sciences and Arts and International ...
Phase Formation at the Sintering of Sa, Zn, Ti Oxides
(Kiev, 2009)
Complex compounds with oxide phases of Ba, 2n, and 11 are widely used in instrument engineering. It is also important to find such production routes for ceramics, which provide their stable structure and properties. Phase ...
Reduction of the specific surface area of porous ZnO during sintering
(Čačak : Technical Faculty, 2007)
In this paper reduction of the specifice surface area of porous ZnO during sintering was analyzed. ZnO was sintered at temperatures from 673K to 1173K. Reduction of the specific surface area was observed as a function of ...
Densification of BTS Functionally Graded Materials during Sintering
(2008)
Poster presented at the 10th Conference of the Materials Research Society of Serbia - YUCOMAT 2008, Herceg Novi, Crna Gora, 8-12. septembar 2008.
Surface analysis of bismuth titanate by Auger and X-ray photoelectron spectroscopy
(Elsevier, 2009)
The Auger and XPS technique has been used for investigation in the surface of bismuth titanate (Bi4Ti3O12) (BIT) ceramics obtained by reactive sintering from Bi2O3 and TiO2 oxides. All peaks characteristic for bismuth, ...
Influence of mechanical activation on synthesis and properties of the MgO-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2007)
Materials applied in electronics such as multilayer capacitors are an important field of ceramic materials. Magnesium titanate based dielectric materials are used for producing type-I capacitors. A common way of obtaining ...
Uticaj aditiva na sinterovanje sistema ZnO-TiO2 saglasno trijadi sinteza-struktura-svojstva
(Belgrade : University of Belgrade, Faculty of Physical Chemistry, 2007)
U okviru ove doktorske disertacije detaljno i sistematski je proučen uticaj aditiva magnezijum oksida na sintezu i sinterovanje sistema ZnO-TiO2. Smeša prahova ZnO, TiO2, MgO (0, 1,25 i 2,50 masenih % MgO), mehanički je ...