Search
Now showing items 1-10 of 55
Composition of red mud and/or metakaolin-based modified geopolymers
(Belgrade : Materials Research Society of Serbia, 2017)
There is potential use of red mud for synthesis of inorganic polymeric materials through a geopolymerization process as an alternative in the sectors of construction and building materials. By introducing of inorganic and ...
Geometrical and electrical properties of NTC polycrystalline thermistors vs. Changes of sintering parameters
(Belgrade : International Institute for the Science of Sintering, 2006)
NTC thermistor powder was made of a Mn, Ni, Fe and Co oxide mixture calcinated at 1050°C / 60 min. The powder was milled in a ball mill down to an average particle diameter of 0.9 μm. Small disc shaped pills of the powder ...
Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate
(Journal of the European Ceramic Society, 2018)
The present study describes sintering behaviour of hydroxyapatite (HAp) upon addition of lithium iron phosphate (LFP) (1-10 wt.%) system in inert (Ar) atmosphere. The interaction between materials and melting of LFP ...
Microstructure and dielectric properties of BaTiO3 doped with Er2O3, Yb2O3 and Ho 2O3
(Faenza : ISTEC-CNR, 2008)
Doped barium-titanate ceramic is attracting much interest for its application as resistors with a positive temperature coefficient of resistivity (PTCR), multilayer ceramic capacitors (MLCC), thermal sensors etc. In this ...
Densification rate and phase structure changes during sintering of zinc titanate ceramics
(Elsevier, 2009)
Densification rate and phase structure changes during sintering of nanosized ZnTiO3 were studied. Sintering was performed in a dilatometer in two regimes: the first to 900 °C (heating rates 5, 10 and 15 °C/min) and the ...
The influence of mechanical activation on structural evolution of nanocrystalline SrTiO3 powders
(Elsevier, 2017)
Structural changes caused by mechanical activation of SrTiO3 powders were investigated using a variety of methods. Average crystallite size continuously decreased with increased activation time to around 20 nm after 120 ...
The fractal nature materials microstructure influence on electrochemical energy sources
(Belgrade : International Institute for the Science of Sintering, 2015)
With increasing of the world energy crisis, research for new, renewable and alternative energy sources are in growth. The focus is on research areas, sometimes of minor importance and applications, where the different ...
Sintering Effects on Microstructure and Electrical Properties of CaCu3Ti4O12 Ceramics
(Hoboken, NJ : John Wiley & Sons, 2013)
CCTO powders were prepared by solid state reaction and mechanochemically, respectively. Synthesized powders were characterized by XRD, FE-SEM and PSA techniques. The sinterability of CCTO powders was investigated by heating ...
Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
(Elsevier, 2018)
The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of ...
The contribution of fractal nature to BaTiO3-ceramics microstructure analysis
(Elsevier, 2012)
The structure of BaTiO3 based materials can be controlled by using different technological parameters and different additives. In this paper, microstructure and dielectrical properties of Er2O3 doped BaTiO3-ceramics, ...