Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis
Само за регистроване кориснике
2020
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this work, we reported the fabrication of hybrid structures by growing the multi-walled carbon nanotubes (MWCNT) on porous silicon (PS) as a template. Aligned multi-walled carbon nanotubes have been successfully synthesized on PS by ultrasonic spray pyrolysis (USP) using a solution of Toluene/Ferrocene as the precursor, while electrochemical anodization method was used to fabricate the PS layers. Au contact was deposited as a metallic contact on the MWCNT layer in order to measure the electrical properties and to analyze the electrical effect of the incorporation of MWCNT on PS. The structural and morphological characteristics of the hybrid structures were investigated by using Field Emission Scanning Electron Microscope (FE-SEM) showing that MWCNT formed a thin film on the PS surface in the form of an aligned array and perpendicular fiber-like structures to the porous surface. High-Resolution Transmission Electron Microscopy (HRTEM) images confirmed the diameter of the CNT between ...10 and 30 nm and typically consisted of 10–20 concentric shells of carbon sheets. Raman Microscopy showed three characteristic bands and a high graphitization extent, even it was possible to observe that the carbon structures passivated the PS layer. Consequently, the photoluminescence (PL) spectrum of PS layers significantly was modified by MWCNT. Finally, electrical measurements provided a practical approach to describe how the materials behave under specific conditions that can be used for different applications in electronics or optoelectronics such as diodes or photodetectors. Significant differences were found under darkness, and illumination conditions of current-voltage (I–V) curves implied their possible application in optoelectronics. Moreover, symmetrical rectifying and Ohmic behavior was observed, which rarely has been reported in the literature, even it was possible to fit a transport mechanism, and the capacitance-voltage (C–V) curves presented an un-exponential behavior with interesting effects such as an increase of built-in voltage and negative capacitance. Based on the results obtained, the growth method for MWCNT structures was proposed.
Кључне речи:
carbon nanotubes / electrical characteristics / ferrocene / hybrid structure / spray pyrolysisИзвор:
Microporous and Mesoporous Materials, 2020, 292, 109738-Издавач:
- Elsevier
Финансирање / пројекти:
- Project ID Project Title Autonomous Region Program of Madrid, Spain, MULTIMAT-CHALLENGE (ref. S2013/MIT-2862)
- Innovation and Education Ministry, Spain, Project MAT2013-47460-C5-5-P
- Innovation and Education Ministry, Spain, Project MAT2016-80875-C3-3-R
- Рационални дизајн и синтеза биолошки активних и координационих једињења и функционалних материјала, релевантних у (био)нанотехнологији (RS-172035)
- CONTACT scholarship no. 568124
DOI: 10.1016/j.micromeso.2019.109738
ISSN: 1387-1811
WoS: 000498292200017
Scopus: 2-s2.0-85072276752
URI
http://www.sciencedirect.com/science/article/pii/S1387181119305955https://dais.sanu.ac.rs/123456789/6881
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Garzon-Roman, Abel AU - Milošević, Olivera AU - Rabanal, Maria Eugenia PY - 2020 UR - http://www.sciencedirect.com/science/article/pii/S1387181119305955 UR - https://dais.sanu.ac.rs/123456789/6881 AB - In this work, we reported the fabrication of hybrid structures by growing the multi-walled carbon nanotubes (MWCNT) on porous silicon (PS) as a template. Aligned multi-walled carbon nanotubes have been successfully synthesized on PS by ultrasonic spray pyrolysis (USP) using a solution of Toluene/Ferrocene as the precursor, while electrochemical anodization method was used to fabricate the PS layers. Au contact was deposited as a metallic contact on the MWCNT layer in order to measure the electrical properties and to analyze the electrical effect of the incorporation of MWCNT on PS. The structural and morphological characteristics of the hybrid structures were investigated by using Field Emission Scanning Electron Microscope (FE-SEM) showing that MWCNT formed a thin film on the PS surface in the form of an aligned array and perpendicular fiber-like structures to the porous surface. High-Resolution Transmission Electron Microscopy (HRTEM) images confirmed the diameter of the CNT between 10 and 30 nm and typically consisted of 10–20 concentric shells of carbon sheets. Raman Microscopy showed three characteristic bands and a high graphitization extent, even it was possible to observe that the carbon structures passivated the PS layer. Consequently, the photoluminescence (PL) spectrum of PS layers significantly was modified by MWCNT. Finally, electrical measurements provided a practical approach to describe how the materials behave under specific conditions that can be used for different applications in electronics or optoelectronics such as diodes or photodetectors. Significant differences were found under darkness, and illumination conditions of current-voltage (I–V) curves implied their possible application in optoelectronics. Moreover, symmetrical rectifying and Ohmic behavior was observed, which rarely has been reported in the literature, even it was possible to fit a transport mechanism, and the capacitance-voltage (C–V) curves presented an un-exponential behavior with interesting effects such as an increase of built-in voltage and negative capacitance. Based on the results obtained, the growth method for MWCNT structures was proposed. PB - Elsevier T2 - Microporous and Mesoporous Materials T1 - Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis SP - 109738 VL - 292 DO - 10.1016/j.micromeso.2019.109738 UR - https://hdl.handle.net/21.15107/rcub_dais_6881 ER -
@article{ author = "Garzon-Roman, Abel and Milošević, Olivera and Rabanal, Maria Eugenia", year = "2020", abstract = "In this work, we reported the fabrication of hybrid structures by growing the multi-walled carbon nanotubes (MWCNT) on porous silicon (PS) as a template. Aligned multi-walled carbon nanotubes have been successfully synthesized on PS by ultrasonic spray pyrolysis (USP) using a solution of Toluene/Ferrocene as the precursor, while electrochemical anodization method was used to fabricate the PS layers. Au contact was deposited as a metallic contact on the MWCNT layer in order to measure the electrical properties and to analyze the electrical effect of the incorporation of MWCNT on PS. The structural and morphological characteristics of the hybrid structures were investigated by using Field Emission Scanning Electron Microscope (FE-SEM) showing that MWCNT formed a thin film on the PS surface in the form of an aligned array and perpendicular fiber-like structures to the porous surface. High-Resolution Transmission Electron Microscopy (HRTEM) images confirmed the diameter of the CNT between 10 and 30 nm and typically consisted of 10–20 concentric shells of carbon sheets. Raman Microscopy showed three characteristic bands and a high graphitization extent, even it was possible to observe that the carbon structures passivated the PS layer. Consequently, the photoluminescence (PL) spectrum of PS layers significantly was modified by MWCNT. Finally, electrical measurements provided a practical approach to describe how the materials behave under specific conditions that can be used for different applications in electronics or optoelectronics such as diodes or photodetectors. Significant differences were found under darkness, and illumination conditions of current-voltage (I–V) curves implied their possible application in optoelectronics. Moreover, symmetrical rectifying and Ohmic behavior was observed, which rarely has been reported in the literature, even it was possible to fit a transport mechanism, and the capacitance-voltage (C–V) curves presented an un-exponential behavior with interesting effects such as an increase of built-in voltage and negative capacitance. Based on the results obtained, the growth method for MWCNT structures was proposed.", publisher = "Elsevier", journal = "Microporous and Mesoporous Materials", title = "Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis", pages = "109738", volume = "292", doi = "10.1016/j.micromeso.2019.109738", url = "https://hdl.handle.net/21.15107/rcub_dais_6881" }
Garzon-Roman, A., Milošević, O.,& Rabanal, M. E.. (2020). Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis. in Microporous and Mesoporous Materials Elsevier., 292, 109738. https://doi.org/10.1016/j.micromeso.2019.109738 https://hdl.handle.net/21.15107/rcub_dais_6881
Garzon-Roman A, Milošević O, Rabanal ME. Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis. in Microporous and Mesoporous Materials. 2020;292:109738. doi:10.1016/j.micromeso.2019.109738 https://hdl.handle.net/21.15107/rcub_dais_6881 .
Garzon-Roman, Abel, Milošević, Olivera, Rabanal, Maria Eugenia, "Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis" in Microporous and Mesoporous Materials, 292 (2020):109738, https://doi.org/10.1016/j.micromeso.2019.109738 ., https://hdl.handle.net/21.15107/rcub_dais_6881 .