The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment
Gvozdenović, Milica M.
Stevanović, Jasmina S.
Conference object (Published version)
MetadataShow full item record
This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. Results, obtained using the standard electrochemical techniques, have indicated that the anodes could be used under the same conditions as well as in the conventional copper refining process.
Keywords:copper anodes / non-standard chemical composition / electrorefining / sulphur acidic waste solution / alloying elements
Source:Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering, 2011, 968-971
- Tatranské Matliare : Slovak Society of Chemical Engineering
- The Impact of Mining Wastes from RTB Bor on the Pollution of Surrounding Water Systems with the Proposal of Measures and Procedures for Reduction the Harmful Effects on the Environment (RS-37001)