Show simple item record

dc.creatorKosanović, Darko
dc.creatorŽivojinović, Jelena
dc.creatorObradović, Nina
dc.creatorPavlović, Vera P.
dc.creatorPavlović, Vladimir B.
dc.creatorPeleš, Adriana
dc.creatorRistić, Momčilo M.
dc.date.accessioned2017-06-10T15:45:07Z
dc.date.available2016-04-15T15:45:07Z
dc.date.issued2014
dc.identifier.issn0272-8842
dc.identifier.urihttp://dais.sanu.ac.rs/123456789/543
dc.description.abstractFerroelectric barium strontium titanate (Ba0.77Sr0.23TiO3), BST, was prepared by solid-state reactions using as the starting compounds powder of barium carbonate (BaCO3), strontium carbonate (SrCO3) and titanium dioxide (TiO2–anatase). Non-activated mixtures and mixtures mechanically activated in a high-energy planetary ball mill (0, 5, 10, 20, 40, 80 and 120 min) were sintered at 1100, 1200, 1300 and 1400 °C for 2 h in air atmosphere. Defects and the effect of the beginning of the sintering process on the microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements (loss tangent and resistivity as the function of frequency XC=f(log ν)) were performed for ceramics sintered at 1400 °C for 2 h. It has been found that mechanical activation can reduce the sintering temperature by around 100 °C, which leads to significant energy savings. Furthermore, activated for 80 min and sintered at 1400 °C for 2 h exhibit the largest density values and have about 36% lower dielectric loss at a frequency of 1 kHz and about 57% at a frequency of 10 kHz than the samples obtained from the initial non-activated powder sintered under the same conditions.en
dc.format(2014) -
dc.formatapplication/pdf
dc.languageen
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172057/RS//
dc.relationSerbian Academy of Sciences and Arts, Project F-198
dc.rightsembargoedAccess
dc.sourceCeramics International
dc.subjectmilling
dc.subjectsintering
dc.subjectmechanical activation
dc.subjectelectrical properties
dc.titleThe influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramicsen
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractКосановић, Дарко; Живојиновић, Јелена; Обрадовић, Нина; Павловић, В. П.; Павловић, Владимир Б.; Ристић, Момчило М.; Пелеш, Aдриана;
dc.citation.spage11883
dc.citation.epage11888
dc.citation.volume40
dc.citation.issue8, Part A
dc.identifier.wos000340328600051
dc.identifier.doi10.1016/j.ceramint.2014.04.023
dc.identifier.scopus2-s2.0-84903899502
dc.description.otherThis is the peer reviewed version of the following article:Kosanović, D., Živojinović, J., Obradović, N., Pavlović, V.P., Pavlović, V.B., Peleš, A., Ristić, M.M., 2014. The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics. Ceramics International 40, 11883–11888. [https://doi.org/10.1016/j.ceramint.2014.04.023]
dc.type.versionacceptedVersion
dc.identifier.fulltexthttp://dais.sanu.ac.rs/bitstream/id/5874/bitstream_5874.pdf


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record