Prikaz osnovnih podataka o dokumentu

dc.contributorKuczynski, George Czeslaw
dc.contributorUskoković, Dragan
dc.contributorPalmour III, Hayne
dc.contributorRistić, Momčilo M.
dc.creatorZdujić, Miodrag
dc.creatorPetrović, V.
dc.creatorUskoković, Dragan
dc.date.accessioned2017-06-10T15:45:07Z
dc.date.issued1987
dc.identifier.isbn9781461297994 (Print) 9781461328513 (Online)
dc.identifier.urihttps://dais.sanu.ac.rs/123456789/521
dc.description.abstractMolybdenum powders were produced by the rotating electrode process in helium atmosphere. The electrode diameter was 0.01 m and the angular velocity was 524 and 2094 rad/s, respectively. The increase of the angular velocity was followed by the decrease of mean particle size, which was 690 and 193 μm for the indicated angular velocities, respectively. The particles obtained were spherical, and their flow rate and apparent density was high. Theoretical cooling rates were calculated and were in the range 104–106 K/sec for particle diameters 800 μm — 50 μm. Typical powder solidification structure consisted of equiaxed grains and dendrites whose sizes were related to particle size.en
dc.format(1987) 101-108
dc.languageen
dc.publisherNew York; London : Plenum Press
dc.rightsrestrictedAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceSintering’85en
dc.subjectrotating electrode process
dc.subjectmolybdenum powders
dc.titlePreparation of Molybdenum Powders by Rotating Electrode Processen
dc.typeconferenceObject
dc.rights.licenseBY-NC-ND
dcterms.abstractЗдујић, Миодраг; Ускоковић, Драган; Петровић, В.;
dc.citation.spage101
dc.citation.epage108
dc.identifier.doi10.1007/978-1-4613-2851-3_10
dc.type.versionpublishedVersion
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_dais_521


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu