ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.
Source:
Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008], 2008
Publisher:
Faenza : Institute of Science and Technology for Ceramics, National Research Council
TY - CONF
AU - Ivetić, Tamara
AU - Nikolić, Maria Vesna
AU - Paraskevopoulos, Konstantinos M.
AU - Blagojević, Vladimir D.
AU - Nikolić, Pantelija M.
AU - Ristić, Momčilo M.
PY - 2008
UR - http://dais.sanu.ac.rs/123456789/3565
AB - ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.
PB - Faenza : Institute of Science and Technology for Ceramics, National Research Council
C3 - Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008]
T1 - A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics
ER -
@conference{
editor = "Bellosi, Alida, Babini, Gian Nicola",
author = "Ivetić, Tamara and Nikolić, Maria Vesna and Paraskevopoulos, Konstantinos M. and Blagojević, Vladimir D. and Nikolić, Pantelija M. and Ristić, Momčilo M.",
year = "2008",
url = "http://dais.sanu.ac.rs/123456789/3565",
abstract = "ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.",
publisher = "Faenza : Institute of Science and Technology for Ceramics, National Research Council",
journal = "Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008]",
title = "A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics"
}
Bellosi A, Babini GN, Ivetić T, Nikolić MV, Paraskevopoulos KM, Blagojević VD, Nikolić PM, Ristić MM. A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics. Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008]. 2008;
Bellosi, A., Babini, G. N., Ivetić, T., Nikolić, M. V., Paraskevopoulos, K. M., Blagojević, V. D., Nikolić, P. M.,& Ristić, M. M. (2008). A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics.
Global roadmap for ceramics : ICC2 proceedings / 2nd International Congress on Ceramics, [Verona, Italy, June 29 - July 4, 2008]Faenza : Institute of Science and Technology for Ceramics, National Research Council., null.
Bellosi Alida, Babini Gian Nicola, Ivetić Tamara, Nikolić Maria Vesna, Paraskevopoulos Konstantinos M., Blagojević Vladimir D., Nikolić Pantelija M., Ristić Momčilo M., "A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics" null (2008)
