Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system
2010
Autori
Filipović, SuzanaObradović, Nina
Pavlović, Vladimir B.
Marković, Smilja
Mitrić, Miodrag
Ristić, Momčilo M.
Ostala autorstva
Ristić, Momčilo M.Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Mixtures of MgO-TiO2 were mechanically activated using high-energy planetary ball mill during 5, 10, 20, 40, 80 and 120 minutes. Sintering process was preformed in air at 1100o-1400oC for 2h. The decrease in powder’s particle size was noticed as the time of mechanical activation increased and confirmed by particle size analyzer. XRD analyses were performed in order to acquire the information about phase composition. Different ratio mixtures of MgTiO3 and Mg2TiO4 are present within all sintered samples. The effect of tribophysical activation on microstructure was investigated by scanning electron microscopy. The differential thermal gravimetric analysis has been performed in order to investigate thermal behaviour of the mixtures.
Ključne reči:
ceramics / mechanochemical processing / sintering / X-ray diffractionIzvor:
Science of Sintering, 2010, 42, 2, 143-151Izdavač:
- Belgrade : International Institute for the Science of Sintering
Finansiranje / projekti:
- Proučavanje međuzavisnosti u trijadi ''sinteza-struktura-svojstva'' za funkcionalne materijala (RS-MESTD-MPN2006-2010-142011)
- Serbian Academy of Sciences and Arts, Project F-197
DOI: 10.2298/SOS100518002F
ISSN: 1820-7413; 0350-820X (Print)
WoS: 000283027300002
Scopus: 2-s2.0-78049426077
Kolekcije
Institucija/grupa
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Filipović, Suzana AU - Obradović, Nina AU - Pavlović, Vladimir B. AU - Marković, Smilja AU - Mitrić, Miodrag AU - Ristić, Momčilo M. PY - 2010 UR - https://dais.sanu.ac.rs/123456789/204 AB - Mixtures of MgO-TiO2 were mechanically activated using high-energy planetary ball mill during 5, 10, 20, 40, 80 and 120 minutes. Sintering process was preformed in air at 1100o-1400oC for 2h. The decrease in powder’s particle size was noticed as the time of mechanical activation increased and confirmed by particle size analyzer. XRD analyses were performed in order to acquire the information about phase composition. Different ratio mixtures of MgTiO3 and Mg2TiO4 are present within all sintered samples. The effect of tribophysical activation on microstructure was investigated by scanning electron microscopy. The differential thermal gravimetric analysis has been performed in order to investigate thermal behaviour of the mixtures. PB - Belgrade : International Institute for the Science of Sintering T2 - Science of Sintering T1 - Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system SP - 143 EP - 151 VL - 42 IS - 2 DO - 10.2298/SOS100518002F UR - https://hdl.handle.net/21.15107/rcub_dais_204 ER -
@article{ author = "Filipović, Suzana and Obradović, Nina and Pavlović, Vladimir B. and Marković, Smilja and Mitrić, Miodrag and Ristić, Momčilo M.", year = "2010", abstract = "Mixtures of MgO-TiO2 were mechanically activated using high-energy planetary ball mill during 5, 10, 20, 40, 80 and 120 minutes. Sintering process was preformed in air at 1100o-1400oC for 2h. The decrease in powder’s particle size was noticed as the time of mechanical activation increased and confirmed by particle size analyzer. XRD analyses were performed in order to acquire the information about phase composition. Different ratio mixtures of MgTiO3 and Mg2TiO4 are present within all sintered samples. The effect of tribophysical activation on microstructure was investigated by scanning electron microscopy. The differential thermal gravimetric analysis has been performed in order to investigate thermal behaviour of the mixtures.", publisher = "Belgrade : International Institute for the Science of Sintering", journal = "Science of Sintering", title = "Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system", pages = "143-151", volume = "42", number = "2", doi = "10.2298/SOS100518002F", url = "https://hdl.handle.net/21.15107/rcub_dais_204" }
Filipović, S., Obradović, N., Pavlović, V. B., Marković, S., Mitrić, M.,& Ristić, M. M.. (2010). Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system. in Science of Sintering Belgrade : International Institute for the Science of Sintering., 42(2), 143-151. https://doi.org/10.2298/SOS100518002F https://hdl.handle.net/21.15107/rcub_dais_204
Filipović S, Obradović N, Pavlović VB, Marković S, Mitrić M, Ristić MM. Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system. in Science of Sintering. 2010;42(2):143-151. doi:10.2298/SOS100518002F https://hdl.handle.net/21.15107/rcub_dais_204 .
Filipović, Suzana, Obradović, Nina, Pavlović, Vladimir B., Marković, Smilja, Mitrić, Miodrag, Ristić, Momčilo M., "Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system" in Science of Sintering, 42, no. 2 (2010):143-151, https://doi.org/10.2298/SOS100518002F ., https://hdl.handle.net/21.15107/rcub_dais_204 .