Show simple item record

dc.contributor.editorMatović, Branko
dc.contributor.editorBranković, Zorica
dc.contributor.editorBučevac, Dušan
dc.contributor.editorSrdić, Vladimir
dc.creatorVasiljević, Zorka Ž.
dc.creatorVasiljević Radović, Dana
dc.creatorNikolić, Maria Vesna
dc.creatorLabus, Nebojša
dc.date.accessioned2017-12-11T15:39:43Z
dc.date.available2017-12-11T15:39:43Z
dc.date.issued2015
dc.identifier.isbn978-86-80109-19-0
dc.identifier.urihttp://dais.sanu.ac.rs/123456789/15426
dc.description.abstractMetastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.eng
dc.format(2015) 101-101
dc.formatapplication/pdf
dc.languageen
dc.publisherBelgrade : Institute for Multidisciplinary Research, University of Belgrade
dc.rightsopenAccess
dc.sourceProgramme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbiaeng
dc.subjectZnTiO3
dc.subjectnanopowders
dc.subjecttwo-step sintering
dc.titleTwo step sintering of the ZnTiO3 nanopowderen
dc.typeconferenceObject
dc.rights.licenseBY-NC-ND
dcterms.abstractНиколић, Мариа Весна; Васиљевић, Зорка; Васиљевић Радовић, Дана; Лабус, Небојша;
dc.citation.spage101
dc.citation.epage101
dc.type.versionpublishedVersion
dc.identifier.fulltexthttp://dais.sanu.ac.rs/bitstream/id/20048/1819.pdf


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record