Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties
Authorized Users Only
2021
Authors
Pantović Pavlović, Marijana R.Stanojević, Boris P.
Pavlović, Miroslav M.
Mihailović, Marija D.
Stevanović, Jasmina
Panić, Vladimir V.
Ignjatović, Nenad
Article (Published version)
Metadata
Show full item recordAbstract
The aim of this work was to investigate corrosion resistivity, bioactivity, and antibacterial activity of novel nano-amorphous calcium phosphate (ACP) potentially multifunctional composite coatings with and without chitosan oligosaccharide lactate (ChOL), ACP + ChOL/TiO2 and ACP/TiO2 ACP + ChOL/TiO2, respectively, on the titanium substrate. The coatings were obtained by new single-step in situ anodization of the substrate to generate TiO2 and the anaphoretic electrodeposition process of ACP and ChOL. The obtained coatings were around 300 ± 15 μm thick and consisted of two phases, namely, TiO2 and hybrid composite phases. Both ACP/TiO2 and ACP + ChOL/TiO2 have improved corrosion stability, whereas the ACP + ChOL/TiO2 coating showed better corrosion stability. It was shown that at the very start of the deposition process, the formation of the ChOL/TiO2 layer takes place predominantly, which is followed by the inclusion of ChOL into ACP with simultaneous growth of TiO2. This deposition me...chanism resulted in the formation of strongly bonded uniform stable coating with high corrosion resistance. In vitro bioactivity was investigated by immersion of the samples in simulated body fluid (SBF). There is in-bone-like apatite formation on both ACP/TiO2 and ACP + ChOL/TiO2 surfaces upon immersion into SBF, which was proven by X-ray diffraction and Fourier transform infrared spectroscopy. While ACP/TiO2 shows no antibacterial activity, ACP + ChOL/TiO2 samples exhibited three- to fourfold decreases in the number of Staphylococcus aureus and Pseudomonas aeruginosa, respectively, after 420 min. The probable mechanism is binding ChOL with the bacterial cell wall, inhibiting its growth, altering the permeability of the cell membrane, and leading to bacterial death.
Keywords:
antibacterial activity / titanium / bioactivity / corrosion stability / amorphous materials / calcium phosphate / chitosan oligosaccharide lactateSource:
ACS Biomaterials Science & Engineering, 2021, 7, 7, 3088-3102Publisher:
- American Chemical Society (ACS)
Funding / projects:
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM) (RS-MESTD-inst-2020-200026)
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200175 (Institute of Technical Sciences of SASA, Belgrade) (RS-MESTD-inst-2020-200175)
Note:
- Peer-reviewed manuscript: https://hdl.handle.net/21.15107/rcub_dais_11784
- Supplementary information: https://hdl.handle.net/21.15107/rcub_dais_11740
Related info:
- Version of
https://hdl.handle.net/21.15107/rcub_dais_11784 - Referenced by
https://hdl.handle.net/21.15107/rcub_dais_11740
DOI: 10.1021/acsbiomaterials.1c00035
ISSN: 2373-9878; 2373-9878
WoS: 000674162000019
Scopus: 2-s2.0-85110635765
Institution/Community
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Pantović Pavlović, Marijana R. AU - Stanojević, Boris P. AU - Pavlović, Miroslav M. AU - Mihailović, Marija D. AU - Stevanović, Jasmina AU - Panić, Vladimir V. AU - Ignjatović, Nenad PY - 2021 UR - https://dais.sanu.ac.rs/123456789/11739 AB - The aim of this work was to investigate corrosion resistivity, bioactivity, and antibacterial activity of novel nano-amorphous calcium phosphate (ACP) potentially multifunctional composite coatings with and without chitosan oligosaccharide lactate (ChOL), ACP + ChOL/TiO2 and ACP/TiO2 ACP + ChOL/TiO2, respectively, on the titanium substrate. The coatings were obtained by new single-step in situ anodization of the substrate to generate TiO2 and the anaphoretic electrodeposition process of ACP and ChOL. The obtained coatings were around 300 ± 15 μm thick and consisted of two phases, namely, TiO2 and hybrid composite phases. Both ACP/TiO2 and ACP + ChOL/TiO2 have improved corrosion stability, whereas the ACP + ChOL/TiO2 coating showed better corrosion stability. It was shown that at the very start of the deposition process, the formation of the ChOL/TiO2 layer takes place predominantly, which is followed by the inclusion of ChOL into ACP with simultaneous growth of TiO2. This deposition mechanism resulted in the formation of strongly bonded uniform stable coating with high corrosion resistance. In vitro bioactivity was investigated by immersion of the samples in simulated body fluid (SBF). There is in-bone-like apatite formation on both ACP/TiO2 and ACP + ChOL/TiO2 surfaces upon immersion into SBF, which was proven by X-ray diffraction and Fourier transform infrared spectroscopy. While ACP/TiO2 shows no antibacterial activity, ACP + ChOL/TiO2 samples exhibited three- to fourfold decreases in the number of Staphylococcus aureus and Pseudomonas aeruginosa, respectively, after 420 min. The probable mechanism is binding ChOL with the bacterial cell wall, inhibiting its growth, altering the permeability of the cell membrane, and leading to bacterial death. PB - American Chemical Society (ACS) T2 - ACS Biomaterials Science & Engineering T1 - Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties SP - 3088 EP - 3102 VL - 7 IS - 7 DO - 10.1021/acsbiomaterials.1c00035 UR - https://hdl.handle.net/21.15107/rcub_dais_11739 ER -
@article{ author = "Pantović Pavlović, Marijana R. and Stanojević, Boris P. and Pavlović, Miroslav M. and Mihailović, Marija D. and Stevanović, Jasmina and Panić, Vladimir V. and Ignjatović, Nenad", year = "2021", abstract = "The aim of this work was to investigate corrosion resistivity, bioactivity, and antibacterial activity of novel nano-amorphous calcium phosphate (ACP) potentially multifunctional composite coatings with and without chitosan oligosaccharide lactate (ChOL), ACP + ChOL/TiO2 and ACP/TiO2 ACP + ChOL/TiO2, respectively, on the titanium substrate. The coatings were obtained by new single-step in situ anodization of the substrate to generate TiO2 and the anaphoretic electrodeposition process of ACP and ChOL. The obtained coatings were around 300 ± 15 μm thick and consisted of two phases, namely, TiO2 and hybrid composite phases. Both ACP/TiO2 and ACP + ChOL/TiO2 have improved corrosion stability, whereas the ACP + ChOL/TiO2 coating showed better corrosion stability. It was shown that at the very start of the deposition process, the formation of the ChOL/TiO2 layer takes place predominantly, which is followed by the inclusion of ChOL into ACP with simultaneous growth of TiO2. This deposition mechanism resulted in the formation of strongly bonded uniform stable coating with high corrosion resistance. In vitro bioactivity was investigated by immersion of the samples in simulated body fluid (SBF). There is in-bone-like apatite formation on both ACP/TiO2 and ACP + ChOL/TiO2 surfaces upon immersion into SBF, which was proven by X-ray diffraction and Fourier transform infrared spectroscopy. While ACP/TiO2 shows no antibacterial activity, ACP + ChOL/TiO2 samples exhibited three- to fourfold decreases in the number of Staphylococcus aureus and Pseudomonas aeruginosa, respectively, after 420 min. The probable mechanism is binding ChOL with the bacterial cell wall, inhibiting its growth, altering the permeability of the cell membrane, and leading to bacterial death.", publisher = "American Chemical Society (ACS)", journal = "ACS Biomaterials Science & Engineering", title = "Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties", pages = "3088-3102", volume = "7", number = "7", doi = "10.1021/acsbiomaterials.1c00035", url = "https://hdl.handle.net/21.15107/rcub_dais_11739" }
Pantović Pavlović, M. R., Stanojević, B. P., Pavlović, M. M., Mihailović, M. D., Stevanović, J., Panić, V. V.,& Ignjatović, N.. (2021). Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties. in ACS Biomaterials Science & Engineering American Chemical Society (ACS)., 7(7), 3088-3102. https://doi.org/10.1021/acsbiomaterials.1c00035 https://hdl.handle.net/21.15107/rcub_dais_11739
Pantović Pavlović MR, Stanojević BP, Pavlović MM, Mihailović MD, Stevanović J, Panić VV, Ignjatović N. Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties. in ACS Biomaterials Science & Engineering. 2021;7(7):3088-3102. doi:10.1021/acsbiomaterials.1c00035 https://hdl.handle.net/21.15107/rcub_dais_11739 .
Pantović Pavlović, Marijana R., Stanojević, Boris P., Pavlović, Miroslav M., Mihailović, Marija D., Stevanović, Jasmina, Panić, Vladimir V., Ignjatović, Nenad, "Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties" in ACS Biomaterials Science & Engineering, 7, no. 7 (2021):3088-3102, https://doi.org/10.1021/acsbiomaterials.1c00035 ., https://hdl.handle.net/21.15107/rcub_dais_11739 .