TY  - JOUR
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Bezbradica, Dejan
AU  - Antov, Mirjana
AU  - Knežević Jugović, Zorica
AU  - Grgur, Branimir
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/704
AB  - Polyaniline (PANI) enzyme electrode was formed by immobilisation of Glucose oxidase (GOx) via glutaraldehyde into electrochemically polymerised PANI on graphite electrode. Electrochemical polymerisation of PANI on graphite was performed from aqueous solution of 1.0 mol dm−3 HCl and 0.25 mol dm−3 aniline at constant current density of 2.0 mA cm−2. Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 μA cm−2 were recorded in different glucose concentrations. The linearity response range was between 1.0 and 5.0 mmol dm−3 of glucose concentration. The estimated apparent Michaelis–Menten constant, was Km′ = 0.30 mmol dm−3, which is significantly lower than that of free enzyme.
PB  - Elsevier
T2  - Food Chemistry
T1  - Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase
SP  - 396
EP  - 400
DO  - 10.1016/j.foodchem.2010.06.046
UR  - https://hdl.handle.net/21.15107/rcub_dais_704
ER  - 

@article{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Bezbradica, Dejan and Antov, Mirjana and Knežević Jugović, Zorica and Grgur, Branimir",
year = "2011",
abstract = "Polyaniline (PANI) enzyme electrode was formed by immobilisation of Glucose oxidase (GOx) via glutaraldehyde into electrochemically polymerised PANI on graphite electrode. Electrochemical polymerisation of PANI on graphite was performed from aqueous solution of 1.0 mol dm−3 HCl and 0.25 mol dm−3 aniline at constant current density of 2.0 mA cm−2. Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 μA cm−2 were recorded in different glucose concentrations. The linearity response range was between 1.0 and 5.0 mmol dm−3 of glucose concentration. The estimated apparent Michaelis–Menten constant, was Km′ = 0.30 mmol dm−3, which is significantly lower than that of free enzyme.",
publisher = "Elsevier",
journal = "Food Chemistry",
title = "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase",
pages = "396-400",
doi = "10.1016/j.foodchem.2010.06.046",
url = "https://hdl.handle.net/21.15107/rcub_dais_704"
}

Gvozdenović, M. M., Jugović, B., Bezbradica, D., Antov, M., Knežević Jugović, Z.,& Grgur, B.. (2011). Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase. in Food Chemistry
Elsevier., 396-400.
https://doi.org/10.1016/j.foodchem.2010.06.046
https://hdl.handle.net/21.15107/rcub_dais_704

Gvozdenović MM, Jugović B, Bezbradica D, Antov M, Knežević Jugović Z, Grgur B. Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase. in Food Chemistry. 2011;:396-400.
doi:10.1016/j.foodchem.2010.06.046
https://hdl.handle.net/21.15107/rcub_dais_704 .

Gvozdenović, Milica M., Jugović, Branimir, Bezbradica, Dejan, Antov, Mirjana, Knežević Jugović, Zorica, Grgur, Branimir, "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase" in Food Chemistry (2011):396-400,
https://doi.org/10.1016/j.foodchem.2010.06.046 .,
https://hdl.handle.net/21.15107/rcub_dais_704 .

TY  - CONF
AU  - Knežević Jugović, Zorica
AU  - Jugović, Branimir
AU  - Jakovetić, Sonja
AU  - Bezbradica, Dejan
AU  - Antov, Mirjana
AU  - Saied, Omar Ali
AU  - Gvozdenović, Milica M.
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/549
AB  - The present study compares the results of two different methods employed for preparation of polyaniline based glucose biosensor with respect to enzyme loading, biosensing efficiency and potential stability. Kinetic analysis of the potentiometric data for two enzyme immobilized electrode systems show that the GOx/PANI electrode is suitable for assaying samples with low analyte concentrations, whereas the GOx/m-ABA/PANI electrode system exhibits a better potential stability. It may therefore be possible to achieve high level of biosensing efficiency by chemical modeling and synthesis combined with careful selection of the immobilization method.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems
SP  - 1519
EP  - 1525
UR  - https://hdl.handle.net/21.15107/rcub_dais_549
ER  - 

@conference{
author = "Knežević Jugović, Zorica and Jugović, Branimir and Jakovetić, Sonja and Bezbradica, Dejan and Antov, Mirjana and Saied, Omar Ali and Gvozdenović, Milica M.",
year = "2011",
abstract = "The present study compares the results of two different methods employed for preparation of polyaniline based glucose biosensor with respect to enzyme loading, biosensing efficiency and potential stability. Kinetic analysis of the potentiometric data for two enzyme immobilized electrode systems show that the GOx/PANI electrode is suitable for assaying samples with low analyte concentrations, whereas the GOx/m-ABA/PANI electrode system exhibits a better potential stability. It may therefore be possible to achieve high level of biosensing efficiency by chemical modeling and synthesis combined with careful selection of the immobilization method.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems",
pages = "1519-1525",
url = "https://hdl.handle.net/21.15107/rcub_dais_549"
}

Knežević Jugović, Z., Jugović, B., Jakovetić, S., Bezbradica, D., Antov, M., Saied, O. A.,& Gvozdenović, M. M.. (2011). Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 1519-1525.
https://hdl.handle.net/21.15107/rcub_dais_549

Knežević Jugović Z, Jugović B, Jakovetić S, Bezbradica D, Antov M, Saied OA, Gvozdenović MM. Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:1519-1525.
https://hdl.handle.net/21.15107/rcub_dais_549 .

Knežević Jugović, Zorica, Jugović, Branimir, Jakovetić, Sonja, Bezbradica, Dejan, Antov, Mirjana, Saied, Omar Ali, Gvozdenović, Milica M., "Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):1519-1525,
https://hdl.handle.net/21.15107/rcub_dais_549 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
AU  - Jugović, Branimir
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3497
AB  - Polyaniline (PANI) anode, electrochemically synthesized on graphite electrode from sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI | H2SO4 | PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.2 and 1.7 V, while discharge would occur in the range of 1.3 and 1 V.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
T1  - Characteristics of polyaniline lead - dioxide power sources
SP  - 871
EP  - 875
UR  - https://hdl.handle.net/21.15107/rcub_dais_3497
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Trišović, Tomislav and Stevanović, Jasmina S. and Jugović, Branimir and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline (PANI) anode, electrochemically synthesized on graphite electrode from sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI | H2SO4 | PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.2 and 1.7 V, while discharge would occur in the range of 1.3 and 1 V.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering",
title = "Characteristics of polyaniline lead - dioxide power sources",
pages = "871-875",
url = "https://hdl.handle.net/21.15107/rcub_dais_3497"
}

Gvozdenović, M. M., Trišović, T., Stevanović, J. S., Jugović, B.,& Grgur, B.. (2010). Characteristics of polyaniline lead - dioxide power sources. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 871-875.
https://hdl.handle.net/21.15107/rcub_dais_3497

Gvozdenović MM, Trišović T, Stevanović JS, Jugović B, Grgur B. Characteristics of polyaniline lead - dioxide power sources. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering. 2010;:871-875.
https://hdl.handle.net/21.15107/rcub_dais_3497 .

Gvozdenović, Milica M., Trišović, Tomislav, Stevanović, Jasmina S., Jugović, Branimir, Grgur, Branimir, "Characteristics of polyaniline lead - dioxide power sources" in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering (2010):871-875,
https://hdl.handle.net/21.15107/rcub_dais_3497 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3498
AB  - Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
T1  - Improved electrolyte for zinc-polyaniline batteries
SP  - 866
EP  - 870
UR  - https://hdl.handle.net/21.15107/rcub_dais_3498
ER  - 

@conference{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina S. and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2010",
abstract = "Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering",
title = "Improved electrolyte for zinc-polyaniline batteries",
pages = "866-870",
url = "https://hdl.handle.net/21.15107/rcub_dais_3498"
}

Jugović, B., Trišović, T., Stevanović, J. S., Gvozdenović, M. M.,& Grgur, B.. (2010). Improved electrolyte for zinc-polyaniline batteries. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 866-870.
https://hdl.handle.net/21.15107/rcub_dais_3498

Jugović B, Trišović T, Stevanović JS, Gvozdenović MM, Grgur B. Improved electrolyte for zinc-polyaniline batteries. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering. 2010;:866-870.
https://hdl.handle.net/21.15107/rcub_dais_3498 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., Gvozdenović, Milica M., Grgur, Branimir, "Improved electrolyte for zinc-polyaniline batteries" in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering (2010):866-870,
https://hdl.handle.net/21.15107/rcub_dais_3498 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3511
AB  - Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte
SP  - s05-P-054
UR  - https://hdl.handle.net/21.15107/rcub_dais_3511
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Trišović, Tomislav and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte",
pages = "s05-P-054",
url = "https://hdl.handle.net/21.15107/rcub_dais_3511"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Trišović, T.,& Grgur, B.. (2010). Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s05-P-054.
https://hdl.handle.net/21.15107/rcub_dais_3511

Jugović B, Gvozdenović MM, Stevanović JS, Trišović T, Grgur B. Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s05-P-054.
https://hdl.handle.net/21.15107/rcub_dais_3511 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Trišović, Tomislav, Grgur, Branimir, "Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s05-P-054,
https://hdl.handle.net/21.15107/rcub_dais_3511 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3514
AB  - Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, corresponding to 25 % of the theoretical mass of PANI available for the dopant exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical characterization of polyaniline electrode for use in electrochemical power sources
SP  - s05-P-049
UR  - https://hdl.handle.net/21.15107/rcub_dais_3514
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina S. and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, corresponding to 25 % of the theoretical mass of PANI available for the dopant exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical characterization of polyaniline electrode for use in electrochemical power sources",
pages = "s05-P-049",
url = "https://hdl.handle.net/21.15107/rcub_dais_3514"
}

Gvozdenović, M. M., Jugović, B., Trišović, T., Stevanović, J. S.,& Grgur, B.. (2010). Electrochemical characterization of polyaniline electrode for use in electrochemical power sources. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s05-P-049.
https://hdl.handle.net/21.15107/rcub_dais_3514

Gvozdenović MM, Jugović B, Trišović T, Stevanović JS, Grgur B. Electrochemical characterization of polyaniline electrode for use in electrochemical power sources. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s05-P-049.
https://hdl.handle.net/21.15107/rcub_dais_3514 .

Gvozdenović, Milica M., Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., Grgur, Branimir, "Electrochemical characterization of polyaniline electrode for use in electrochemical power sources" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s05-P-049,
https://hdl.handle.net/21.15107/rcub_dais_3514 .

TY  - CONF
AU  - Štrbac, Svetlana
AU  - Marinović, Vedrana
AU  - Marinović, Sanja
AU  - Jovanović, M.
AU  - Jovanović, J.
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/243
AB  - Poster presented at the 61st Annual Meeting of the International Society of Electrochemistry, Nice, France, September 26 – October 1, 2010
T1  - Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode
UR  - https://hdl.handle.net/21.15107/rcub_dais_243
ER  - 

@conference{
author = "Štrbac, Svetlana and Marinović, Vedrana and Marinović, Sanja and Jovanović, M. and Jovanović, J.",
year = "2010",
abstract = "Poster presented at the 61st Annual Meeting of the International Society of Electrochemistry, Nice, France, September 26 – October 1, 2010",
title = "Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode",
url = "https://hdl.handle.net/21.15107/rcub_dais_243"
}

Štrbac, S., Marinović, V., Marinović, S., Jovanović, M.,& Jovanović, J.. (2010). Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode. .
https://hdl.handle.net/21.15107/rcub_dais_243

Štrbac S, Marinović V, Marinović S, Jovanović M, Jovanović J. Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode. 2010;.
https://hdl.handle.net/21.15107/rcub_dais_243 .

Štrbac, Svetlana, Marinović, Vedrana, Marinović, Sanja, Jovanović, M., Jovanović, J., "Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode" (2010),
https://hdl.handle.net/21.15107/rcub_dais_243 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/223
AB  - Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010
AB  - Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1
T1  - Improved electrolyte for zinc-polyaniline batteries
UR  - https://hdl.handle.net/21.15107/rcub_dais_223
ER  - 

@conference{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina S. and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2010",
abstract = "Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010, Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1",
title = "Improved electrolyte for zinc-polyaniline batteries",
url = "https://hdl.handle.net/21.15107/rcub_dais_223"
}

Jugović, B., Trišović, T., Stevanović, J. S., Gvozdenović, M. M.,& Grgur, B.. (2010). Improved electrolyte for zinc-polyaniline batteries. .
https://hdl.handle.net/21.15107/rcub_dais_223

Jugović B, Trišović T, Stevanović JS, Gvozdenović MM, Grgur B. Improved electrolyte for zinc-polyaniline batteries. 2010;.
https://hdl.handle.net/21.15107/rcub_dais_223 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., Gvozdenović, Milica M., Grgur, Branimir, "Improved electrolyte for zinc-polyaniline batteries" (2010),
https://hdl.handle.net/21.15107/rcub_dais_223 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/222
AB  - Poster presented at 61st Annual Meeting of the International Society of Electrochemistry, Nice, France, September 26 – October 1, 2010
AB  - Electrochemical power sources consisted of electroconducting polymers combined to electronegative metals and aqueous based electrolytes are likely to accomplish most of the three E criteria (Energy, Economics and Environment) elaborated as the determining factors of an electrochemical power system success. In such systems electroconducting polymers, mainly polyaniline (PANI) due to their ability of reversible oxidation (doping)/reduction (dedoping) could be used as cathodic materials, while owing to relatively low discharge potentials, it is necessary to use electronegative metals such as: magnesium, aluminum and zinc as anodic materials.
T1  - Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
UR  - https://hdl.handle.net/21.15107/rcub_dais_222
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2010",
abstract = "Poster presented at 61st Annual Meeting of the International Society of Electrochemistry, Nice, France, September 26 – October 1, 2010, Electrochemical power sources consisted of electroconducting polymers combined to electronegative metals and aqueous based electrolytes are likely to accomplish most of the three E criteria (Energy, Economics and Environment) elaborated as the determining factors of an electrochemical power system success. In such systems electroconducting polymers, mainly polyaniline (PANI) due to their ability of reversible oxidation (doping)/reduction (dedoping) could be used as cathodic materials, while owing to relatively low discharge potentials, it is necessary to use electronegative metals such as: magnesium, aluminum and zinc as anodic materials.",
title = "Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes",
url = "https://hdl.handle.net/21.15107/rcub_dais_222"
}

Jugović, B., Gvozdenović, M. M.,& Grgur, B.. (2010). Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes. .
https://hdl.handle.net/21.15107/rcub_dais_222

Jugović B, Gvozdenović MM, Grgur B. Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes. 2010;.
https://hdl.handle.net/21.15107/rcub_dais_222 .

Jugović, Branimir, Gvozdenović, Milica M., Grgur, Branimir, "Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes" (2010),
https://hdl.handle.net/21.15107/rcub_dais_222 .

TY  - CONF
AU  - Marinović, Vedrana
AU  - Marinović, Sanja
AU  - Jovanović, Mića
AU  - Jovanović, Jovan
AU  - Štrbac, Svetlana
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3509
AB  - Electrochemical reduction of trinitrololuene (TNT) based on the ready reduction of lheir electron-defficient nitro-groups was investigated using platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode
SP  - s10-P-047
UR  - https://hdl.handle.net/21.15107/rcub_dais_3509
ER  - 

@conference{
author = "Marinović, Vedrana and Marinović, Sanja and Jovanović, Mića and Jovanović, Jovan and Štrbac, Svetlana",
year = "2010",
abstract = "Electrochemical reduction of trinitrololuene (TNT) based on the ready reduction of lheir electron-defficient nitro-groups was investigated using platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode",
pages = "s10-P-047",
url = "https://hdl.handle.net/21.15107/rcub_dais_3509"
}

Marinović, V., Marinović, S., Jovanović, M., Jovanović, J.,& Štrbac, S.. (2010). Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s10-P-047.
https://hdl.handle.net/21.15107/rcub_dais_3509

Marinović V, Marinović S, Jovanović M, Jovanović J, Štrbac S. Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s10-P-047.
https://hdl.handle.net/21.15107/rcub_dais_3509 .

Marinović, Vedrana, Marinović, Sanja, Jovanović, Mića, Jovanović, Jovan, Štrbac, Svetlana, "Electrochemical Reduction of Trinitrotoluene on a Modified Platinum Electrode" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s10-P-047,
https://hdl.handle.net/21.15107/rcub_dais_3509 .

TY  - CONF
AU  - Štrbac, Svetlana
AU  - Marinović, Vedrana
AU  - Rakočević, Zlatko
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3508
AB  - Oxygen reduction was studied on pure polycrystalline PI electrode and on one modified by chemisorbed acetonitrile in neutral solutions containing sulphate or chloride anions. Measurements were performed on polycrystalline Pt rotating disc electrode by a potentiodynamic Sweep method.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Oxygen Reduction on Polycrystalline Pt Electrode Modified by Acetonitrile in Neutral Electrolyte
SP  - s10-P-056
UR  - https://hdl.handle.net/21.15107/rcub_dais_3508
ER  - 

@conference{
author = "Štrbac, Svetlana and Marinović, Vedrana and Rakočević, Zlatko",
year = "2010",
abstract = "Oxygen reduction was studied on pure polycrystalline PI electrode and on one modified by chemisorbed acetonitrile in neutral solutions containing sulphate or chloride anions. Measurements were performed on polycrystalline Pt rotating disc electrode by a potentiodynamic Sweep method.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Oxygen Reduction on Polycrystalline Pt Electrode Modified by Acetonitrile in Neutral Electrolyte",
pages = "s10-P-056",
url = "https://hdl.handle.net/21.15107/rcub_dais_3508"
}

Štrbac, S., Marinović, V.,& Rakočević, Z.. (2010). Oxygen Reduction on Polycrystalline Pt Electrode Modified by Acetonitrile in Neutral Electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s10-P-056.
https://hdl.handle.net/21.15107/rcub_dais_3508

Štrbac S, Marinović V, Rakočević Z. Oxygen Reduction on Polycrystalline Pt Electrode Modified by Acetonitrile in Neutral Electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s10-P-056.
https://hdl.handle.net/21.15107/rcub_dais_3508 .

Štrbac, Svetlana, Marinović, Vedrana, Rakočević, Zlatko, "Oxygen Reduction on Polycrystalline Pt Electrode Modified by Acetonitrile in Neutral Electrolyte" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s10-P-056,
https://hdl.handle.net/21.15107/rcub_dais_3508 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Bezbradica, Dejan
AU  - Antov, Mirjana
AU  - Knežević Jugović, Zorica
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3512
AB  - Polyaniline (PANI) enzyme electrode was formed by immobilization of Glucose oxidase (GOx) via glutaraldehyde into electrochemicaly polymerized PANI on graphite electrode. Electrochemical polymerization of PANI on graphite was performed from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline at constant current density of 2.0 mA cm-2. Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 μA cm-2 were recorded in different glucose concentrations. The linearity response range was between 1.0-5.0 mmol dm-3 of glucose concentration. The estimated apparent Michaelis-Menten constant, was Km ′ = 0.30 mmol dm-3, which is scientifically lower than that of free enzyme.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize
VL  - s11-P-041
UR  - https://hdl.handle.net/21.15107/rcub_dais_3512
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Bezbradica, Dejan and Antov, Mirjana and Knežević Jugović, Zorica and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline (PANI) enzyme electrode was formed by immobilization of Glucose oxidase (GOx) via glutaraldehyde into electrochemicaly polymerized PANI on graphite electrode. Electrochemical polymerization of PANI on graphite was performed from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline at constant current density of 2.0 mA cm-2. Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 μA cm-2 were recorded in different glucose concentrations. The linearity response range was between 1.0-5.0 mmol dm-3 of glucose concentration. The estimated apparent Michaelis-Menten constant, was Km ′ = 0.30 mmol dm-3, which is scientifically lower than that of free enzyme.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize",
volume = "s11-P-041",
url = "https://hdl.handle.net/21.15107/rcub_dais_3512"
}

Gvozdenović, M. M., Jugović, B., Bezbradica, D., Antov, M., Knežević Jugović, Z.,& Grgur, B.. (2010). Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s11-P-041.
https://hdl.handle.net/21.15107/rcub_dais_3512

Gvozdenović MM, Jugović B, Bezbradica D, Antov M, Knežević Jugović Z, Grgur B. Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;s11-P-041.
https://hdl.handle.net/21.15107/rcub_dais_3512 .

Gvozdenović, Milica M., Jugović, Branimir, Bezbradica, Dejan, Antov, Mirjana, Knežević Jugović, Zorica, Grgur, Branimir, "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts, s11-P-041 (2010),
https://hdl.handle.net/21.15107/rcub_dais_3512 .

TY  - JOUR
AU  - Marković, R.
AU  - Friedrich, B.
AU  - Stajić Trošić, Jasna
AU  - Jordović, Branka
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/4844
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, the high concentration of other metals, in this case nickel, is the main characteristic of these waste solutions. Due to this fact, the copper bearing anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass%, and the content of lead, tin and antimony was varied. The preliminary results, obtained using the standard electrochemical techniques, have indicated that the copper bearing anodes could be used under the same conditions as well as in the conventional copper refining process. The measurements in constant galvanostatic pulse have pointed out that the all chemical elements from copper bearing anodes were dissolved and only copper was deposited onto the cathode. It was also pointed out that Ni concentration in the base working electrolyte (sulphur acidic waste solution), after 72 h of process, increased to 102 mass% at T-1 = 63 +/- 2 degrees C and up to 122 mass% at T-1 = 73 +/- 2 degrees C, while arsenic concentration decreased to a minimum value.
PB  - Elsevier Science Bv, Amsterdam
T2  - Journal of Hazardous Materials
T1  - Behaviour of non-standard composition copper bearing anodes from the copper refining process
SP  - 55
EP  - 63
VL  - 182
IS  - 1-3
DO  - 10.1016/j.jhazmat.2010.05.137
UR  - https://hdl.handle.net/21.15107/rcub_dais_4844
ER  - 

@article{
author = "Marković, R. and Friedrich, B. and Stajić Trošić, Jasna and Jordović, Branka and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S.",
year = "2010",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, the high concentration of other metals, in this case nickel, is the main characteristic of these waste solutions. Due to this fact, the copper bearing anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass%, and the content of lead, tin and antimony was varied. The preliminary results, obtained using the standard electrochemical techniques, have indicated that the copper bearing anodes could be used under the same conditions as well as in the conventional copper refining process. The measurements in constant galvanostatic pulse have pointed out that the all chemical elements from copper bearing anodes were dissolved and only copper was deposited onto the cathode. It was also pointed out that Ni concentration in the base working electrolyte (sulphur acidic waste solution), after 72 h of process, increased to 102 mass% at T-1 = 63 +/- 2 degrees C and up to 122 mass% at T-1 = 73 +/- 2 degrees C, while arsenic concentration decreased to a minimum value.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Journal of Hazardous Materials",
title = "Behaviour of non-standard composition copper bearing anodes from the copper refining process",
pages = "55-63",
volume = "182",
number = "1-3",
doi = "10.1016/j.jhazmat.2010.05.137",
url = "https://hdl.handle.net/21.15107/rcub_dais_4844"
}

Marković, R., Friedrich, B., Stajić Trošić, J., Jordović, B., Jugović, B., Gvozdenović, M. M.,& Stevanović, J. S.. (2010). Behaviour of non-standard composition copper bearing anodes from the copper refining process. in Journal of Hazardous Materials
Elsevier Science Bv, Amsterdam., 182(1-3), 55-63.
https://doi.org/10.1016/j.jhazmat.2010.05.137
https://hdl.handle.net/21.15107/rcub_dais_4844

Marković R, Friedrich B, Stajić Trošić J, Jordović B, Jugović B, Gvozdenović MM, Stevanović JS. Behaviour of non-standard composition copper bearing anodes from the copper refining process. in Journal of Hazardous Materials. 2010;182(1-3):55-63.
doi:10.1016/j.jhazmat.2010.05.137
https://hdl.handle.net/21.15107/rcub_dais_4844 .

Marković, R., Friedrich, B., Stajić Trošić, Jasna, Jordović, Branka, Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., "Behaviour of non-standard composition copper bearing anodes from the copper refining process" in Journal of Hazardous Materials, 182, no. 1-3 (2010):55-63,
https://doi.org/10.1016/j.jhazmat.2010.05.137 .,
https://hdl.handle.net/21.15107/rcub_dais_4844 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3513
AB  - Electrochemical polymerization of Polyaniline (PANI) film on aluminum electrode from aqueous solution of 0.20 mol dm-3 sodium benzoate containing 0.25 mol dm-3 aniline have been investigated using potentiodinamic and galvanostatic techniques. Corrosion behavior of aluminum and PANI coated aluminum electrode during initial exposure to 3% NaCl have been investigated using electrochemical potentiodimanic and impedance spectroscopy technique (EIS). It was observed that thin PANI coating of estimated thickness of 10μm had provided good initial corrosion protection of aluminum in3% NaCl, decreasing the corrosion current density at least 15 times.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum
SP  - 06-P-034
UR  - https://hdl.handle.net/21.15107/rcub_dais_3513
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Grgur, Branimir",
year = "2010",
abstract = "Electrochemical polymerization of Polyaniline (PANI) film on aluminum electrode from aqueous solution of 0.20 mol dm-3 sodium benzoate containing 0.25 mol dm-3 aniline have been investigated using potentiodinamic and galvanostatic techniques. Corrosion behavior of aluminum and PANI coated aluminum electrode during initial exposure to 3% NaCl have been investigated using electrochemical potentiodimanic and impedance spectroscopy technique (EIS). It was observed that thin PANI coating of estimated thickness of 10μm had provided good initial corrosion protection of aluminum in3% NaCl, decreasing the corrosion current density at least 15 times.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum",
pages = "06-P-034",
url = "https://hdl.handle.net/21.15107/rcub_dais_3513"
}

Gvozdenović, M. M., Jugović, B.,& Grgur, B.. (2010). Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., 06-P-034.
https://hdl.handle.net/21.15107/rcub_dais_3513

Gvozdenović MM, Jugović B, Grgur B. Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:06-P-034.
https://hdl.handle.net/21.15107/rcub_dais_3513 .

Gvozdenović, Milica M., Jugović, Branimir, Grgur, Branimir, "Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):06-P-034,
https://hdl.handle.net/21.15107/rcub_dais_3513 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3510
AB  - Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determined from the mass lost and from potentiodinamic (1 mV s-1) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
SP  - s06-P-010
UR  - https://hdl.handle.net/21.15107/rcub_dais_3510
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2010",
abstract = "Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determined from the mass lost and from potentiodinamic (1 mV s-1) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes",
pages = "s06-P-010",
url = "https://hdl.handle.net/21.15107/rcub_dais_3510"
}

Jugović, B., Gvozdenović, M. M.,& Grgur, B.. (2010). Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s06-P-010.
https://hdl.handle.net/21.15107/rcub_dais_3510

Jugović B, Gvozdenović MM, Grgur B. Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s06-P-010.
https://hdl.handle.net/21.15107/rcub_dais_3510 .

Jugović, Branimir, Gvozdenović, Milica M., Grgur, Branimir, "Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s06-P-010,
https://hdl.handle.net/21.15107/rcub_dais_3510 .

TY  - JOUR
AU  - Marinović, Vedrana
AU  - Marinović, Sanja
AU  - Jovanović, M.
AU  - Jovanović, J.
AU  - Štrbac, Svetlana
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3415
AB  - The electrochemical reduction of 2,4,6-trinitrotoluene (TNT) was investigated by cyclic voltammetry on a platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT. The obtained cyclic voltammograms showed three distinct reduction peaks in the potential range of -0.45 to -0.8 V (vs. an Ag/AgCl (3 M KCl) reference electrode), which refer to the multi-step process of TNT reduction. The calibration curves of the dependence of the first peak current on the TNT concentration were linear in the ranges 4.4-638.4 μM and 0.11-4.40 μM for two different scan rates, 200 mV s-1 and 20 mV s-1, respectively. The detection limit was 0.11 μM. Acetonitrile chemisorption on Pt surface took place and caused thus modified platinum electrode to exhibit an electrochemically stabile behaviour. Hence, a very high reproducibility over a prolonged time and voltammetric cycling was provided for using a Pt wire that is easy to handle as a suitable material for TNT sensing. Additionally, it was confirmed by testing the acetonitrile modified Pt wire for TNT detection in river water. © 2010 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile
SP  - 1
EP  - 7
VL  - 648
IS  - 1
DO  - 10.1016/j.jelechem.2010.07.008
UR  - https://hdl.handle.net/21.15107/rcub_dais_3415
ER  - 

@article{
author = "Marinović, Vedrana and Marinović, Sanja and Jovanović, M. and Jovanović, J. and Štrbac, Svetlana",
year = "2010",
abstract = "The electrochemical reduction of 2,4,6-trinitrotoluene (TNT) was investigated by cyclic voltammetry on a platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT. The obtained cyclic voltammograms showed three distinct reduction peaks in the potential range of -0.45 to -0.8 V (vs. an Ag/AgCl (3 M KCl) reference electrode), which refer to the multi-step process of TNT reduction. The calibration curves of the dependence of the first peak current on the TNT concentration were linear in the ranges 4.4-638.4 μM and 0.11-4.40 μM for two different scan rates, 200 mV s-1 and 20 mV s-1, respectively. The detection limit was 0.11 μM. Acetonitrile chemisorption on Pt surface took place and caused thus modified platinum electrode to exhibit an electrochemically stabile behaviour. Hence, a very high reproducibility over a prolonged time and voltammetric cycling was provided for using a Pt wire that is easy to handle as a suitable material for TNT sensing. Additionally, it was confirmed by testing the acetonitrile modified Pt wire for TNT detection in river water. © 2010 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile",
pages = "1-7",
volume = "648",
number = "1",
doi = "10.1016/j.jelechem.2010.07.008",
url = "https://hdl.handle.net/21.15107/rcub_dais_3415"
}

Marinović, V., Marinović, S., Jovanović, M., Jovanović, J.,& Štrbac, S.. (2010). The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile. in Journal of Electroanalytical Chemistry
Elsevier., 648(1), 1-7.
https://doi.org/10.1016/j.jelechem.2010.07.008
https://hdl.handle.net/21.15107/rcub_dais_3415

Marinović V, Marinović S, Jovanović M, Jovanović J, Štrbac S. The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile. in Journal of Electroanalytical Chemistry. 2010;648(1):1-7.
doi:10.1016/j.jelechem.2010.07.008
https://hdl.handle.net/21.15107/rcub_dais_3415 .

Marinović, Vedrana, Marinović, Sanja, Jovanović, M., Jovanović, J., Štrbac, Svetlana, "The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile" in Journal of Electroanalytical Chemistry, 648, no. 1 (2010):1-7,
https://doi.org/10.1016/j.jelechem.2010.07.008 .,
https://hdl.handle.net/21.15107/rcub_dais_3415 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/15205
AB  - Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 Na-citrate and different concentration of ZnCl2 were investigated.
Corrosion current densities were determined from the mass lost and from potentiodinamic (1 mV s-1) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.
PB  - Slovak Society of Chemical Engineering
C3  - Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009
T1  - Corrosion studies of anodic materials for use in electrochemical power sources
SP  - 289-1
EP  - 289-8
UR  - https://hdl.handle.net/21.15107/rcub_dais_15205
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 Na-citrate and different concentration of ZnCl2 were investigated.
Corrosion current densities were determined from the mass lost and from potentiodinamic (1 mV s-1) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.",
publisher = "Slovak Society of Chemical Engineering",
journal = "Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009",
title = "Corrosion studies of anodic materials for use in electrochemical power sources",
pages = "289-1-289-8",
url = "https://hdl.handle.net/21.15107/rcub_dais_15205"
}

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T.,& Grgur, B.. (2009). Corrosion studies of anodic materials for use in electrochemical power sources. in Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009
Slovak Society of Chemical Engineering., 289-1-289-8.
https://hdl.handle.net/21.15107/rcub_dais_15205

Jugović B, Gvozdenović M, Stevanović J, Trišović T, Grgur B. Corrosion studies of anodic materials for use in electrochemical power sources. in Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009. 2009;:289-1-289-8.
https://hdl.handle.net/21.15107/rcub_dais_15205 .

Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Corrosion studies of anodic materials for use in electrochemical power sources" in Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009 (2009):289-1-289-8,
https://hdl.handle.net/21.15107/rcub_dais_15205 .

TY  - CONF
AU  - Gvozdenović, Milica
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/15204
AB  - Electrochemical synthesis of polyaniline (PANI) film on aluminum electrode from aqueous solution of 0.20 mol dm-3 sodium benzoate containing 0.25 mol dm-3 aniline have been investigated under potentiodinamic and galvanostatic conditions. Initial corrosion behavior of aluminum and PANI coated aluminum electrode exposed to 3% NaCl has been investigated using electrochemical potentiodimanic and impedance spectroscopy technique (EIS). It was shown that PANI coating had provided corrosion protection of aluminum, decreasing the corrosion current density at least 15 times.
PB  - Slovak Society of Chemical Engineering
C3  - Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009
T1  - Electrochemical synthesis of protective polyaniline coating on aluminum
SP  - 290-1
EP  - 290-7
UR  - https://hdl.handle.net/21.15107/rcub_dais_15204
ER  - 

@conference{
author = "Gvozdenović, Milica and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Grgur, Branimir",
year = "2009",
abstract = "Electrochemical synthesis of polyaniline (PANI) film on aluminum electrode from aqueous solution of 0.20 mol dm-3 sodium benzoate containing 0.25 mol dm-3 aniline have been investigated under potentiodinamic and galvanostatic conditions. Initial corrosion behavior of aluminum and PANI coated aluminum electrode exposed to 3% NaCl has been investigated using electrochemical potentiodimanic and impedance spectroscopy technique (EIS). It was shown that PANI coating had provided corrosion protection of aluminum, decreasing the corrosion current density at least 15 times.",
publisher = "Slovak Society of Chemical Engineering",
journal = "Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009",
title = "Electrochemical synthesis of protective polyaniline coating on aluminum",
pages = "290-1-290-7",
url = "https://hdl.handle.net/21.15107/rcub_dais_15204"
}

Gvozdenović, M., Jugović, B., Trišović, T., Stevanović, J.,& Grgur, B.. (2009). Electrochemical synthesis of protective polyaniline coating on aluminum. in Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009
Slovak Society of Chemical Engineering., 290-1-290-7.
https://hdl.handle.net/21.15107/rcub_dais_15204

Gvozdenović M, Jugović B, Trišović T, Stevanović J, Grgur B. Electrochemical synthesis of protective polyaniline coating on aluminum. in Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009. 2009;:290-1-290-7.
https://hdl.handle.net/21.15107/rcub_dais_15204 .

Gvozdenović, Milica, Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Grgur, Branimir, "Electrochemical synthesis of protective polyaniline coating on aluminum" in Proceedings / 36th International Conference of Slovak Society of Chemical Engineering, Hotel Hutník, Tatranské Matliare, Slovakia May 25 – 29, 2009 (2009):290-1-290-7,
https://hdl.handle.net/21.15107/rcub_dais_15204 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/4842
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. .
AB  - Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
T1  - Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources
SP  - 29
EP  - 33
VL  - 50
IS  - 1
UR  - https://hdl.handle.net/21.15107/rcub_dais_4842
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. ., Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije, Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources",
pages = "29-33",
volume = "50",
number = "1",
url = "https://hdl.handle.net/21.15107/rcub_dais_4842"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J., Trišović, T.,& Grgur, B.. (2009). Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 50(1), 29-33.
https://hdl.handle.net/21.15107/rcub_dais_4842

Jugović B, Gvozdenović MM, Stevanović J, Trišović T, Grgur B. Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije. in Zaštita materijala. 2009;50(1):29-33.
https://hdl.handle.net/21.15107/rcub_dais_4842 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije" in Zaštita materijala, 50, no. 1 (2009):29-33,
https://hdl.handle.net/21.15107/rcub_dais_4842 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/3471
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mAh cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode. © 2008 Elsevier B.V. All rights reserved.
T2  - Materials Chemistry and Physics
T1  - Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources
SP  - 939
EP  - 942
VL  - 114
IS  - 2-3
DO  - 10.1016/j.matchemphys.2008.10.069
UR  - https://hdl.handle.net/21.15107/rcub_dais_3471
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mAh cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode. © 2008 Elsevier B.V. All rights reserved.",
journal = "Materials Chemistry and Physics",
title = "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources",
pages = "939-942",
volume = "114",
number = "2-3",
doi = "10.1016/j.matchemphys.2008.10.069",
url = "https://hdl.handle.net/21.15107/rcub_dais_3471"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Trišović, T.,& Grgur, B.. (2009). Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources. in Materials Chemistry and Physics, 114(2-3), 939-942.
https://doi.org/10.1016/j.matchemphys.2008.10.069
https://hdl.handle.net/21.15107/rcub_dais_3471

Jugović B, Gvozdenović MM, Stevanović JS, Trišović T, Grgur B. Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources. in Materials Chemistry and Physics. 2009;114(2-3):939-942.
doi:10.1016/j.matchemphys.2008.10.069
https://hdl.handle.net/21.15107/rcub_dais_3471 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Trišović, Tomislav, Grgur, Branimir, "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources" in Materials Chemistry and Physics, 114, no. 2-3 (2009):939-942,
https://doi.org/10.1016/j.matchemphys.2008.10.069 .,
https://hdl.handle.net/21.15107/rcub_dais_3471 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/3486
AB  - Electrochemical behavior of zinc and thin polyaniline (PANI) electrodes in citrate/chloride-contained electrolyte has been investigated by the means of electrolyte composition optimization. Electrolyte contained 0.8 M sodium citrate, 0.3 M ammonium chloride, and ~0.3 M zinc chloride has been found to be an optimum electrolyte for the further applications in the real zinc-polyaniline citrate/chloride-based secondary cell. © 2009 Springer Science+Business Media B.V.
PB  - Springer
T2  - Journal of Applied Electrochemistry
T1  - Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte
SP  - 2521
EP  - 2528
VL  - 39
IS  - 12
DO  - 10.1007/s10800-009-9946-7
UR  - https://hdl.handle.net/21.15107/rcub_dais_3486
ER  - 

@article{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina S. and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2009",
abstract = "Electrochemical behavior of zinc and thin polyaniline (PANI) electrodes in citrate/chloride-contained electrolyte has been investigated by the means of electrolyte composition optimization. Electrolyte contained 0.8 M sodium citrate, 0.3 M ammonium chloride, and ~0.3 M zinc chloride has been found to be an optimum electrolyte for the further applications in the real zinc-polyaniline citrate/chloride-based secondary cell. © 2009 Springer Science+Business Media B.V.",
publisher = "Springer",
journal = "Journal of Applied Electrochemistry",
title = "Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte",
pages = "2521-2528",
volume = "39",
number = "12",
doi = "10.1007/s10800-009-9946-7",
url = "https://hdl.handle.net/21.15107/rcub_dais_3486"
}

Jugović, B., Trišović, T., Stevanović, J. S., Gvozdenović, M. M.,& Grgur, B.. (2009). Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte. in Journal of Applied Electrochemistry
Springer., 39(12), 2521-2528.
https://doi.org/10.1007/s10800-009-9946-7
https://hdl.handle.net/21.15107/rcub_dais_3486

Jugović B, Trišović T, Stevanović JS, Gvozdenović MM, Grgur B. Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte. in Journal of Applied Electrochemistry. 2009;39(12):2521-2528.
doi:10.1007/s10800-009-9946-7
https://hdl.handle.net/21.15107/rcub_dais_3486 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., Gvozdenović, Milica M., Grgur, Branimir, "Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte" in Journal of Applied Electrochemistry, 39, no. 12 (2009):2521-2528,
https://doi.org/10.1007/s10800-009-9946-7 .,
https://hdl.handle.net/21.15107/rcub_dais_3486 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/4841
AB  - Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm(-3) Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determinated from the mass lost and from potentiodynamic (1 mV s(-1)) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.
PB  - Oxford : Elsevier Sci Ltd
T2  - Materials & Design
T1  - Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
SP  - 3291
EP  - 3294
VL  - 30
IS  - 8
DO  - 10.1016/j.matdes.2008.12.019
UR  - https://hdl.handle.net/21.15107/rcub_dais_4841
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm(-3) Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determinated from the mass lost and from potentiodynamic (1 mV s(-1)) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.",
publisher = "Oxford : Elsevier Sci Ltd",
journal = "Materials & Design",
title = "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources",
pages = "3291-3294",
volume = "30",
number = "8",
doi = "10.1016/j.matdes.2008.12.019",
url = "https://hdl.handle.net/21.15107/rcub_dais_4841"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Trišović, T.,& Grgur, B.. (2009). Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources. in Materials & Design
Oxford : Elsevier Sci Ltd., 30(8), 3291-3294.
https://doi.org/10.1016/j.matdes.2008.12.019
https://hdl.handle.net/21.15107/rcub_dais_4841

Jugović B, Gvozdenović MM, Stevanović JS, Trišović T, Grgur B. Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources. in Materials & Design. 2009;30(8):3291-3294.
doi:10.1016/j.matdes.2008.12.019
https://hdl.handle.net/21.15107/rcub_dais_4841 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Trišović, Tomislav, Grgur, Branimir, "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources" in Materials & Design, 30, no. 8 (2009):3291-3294,
https://doi.org/10.1016/j.matdes.2008.12.019 .,
https://hdl.handle.net/21.15107/rcub_dais_4841 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Ristić, V.
AU  - Gvozdenović, Milica M.
AU  - Maksimović, M. D.
AU  - Jugović, Branimir
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/3584
AB  - Electrochemically formed thin film polyaniline (PANI) anode and lead dioxide (PbO2) cathode, obtained from sulfuric acid solution, for potential applications as electrode materials in PANI|H2SO4|PbO2 aqueous based rechargeable power sources, have been studied using cyclic voltammetry and galvanostatic techniques. Based on the investigations of half cell reactions, the simulation of the charge/discharge characteristic of the possible cell has been done. © 2008 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Journal of Power Sources
T1  - Polyaniline as possible anode materials for the lead acid batteries
SP  - 635
EP  - 640
VL  - 180
IS  - 1
DO  - 10.1016/j.jpowsour.2008.02.022
UR  - https://hdl.handle.net/21.15107/rcub_dais_3584
ER  - 

@article{
author = "Grgur, Branimir and Ristić, V. and Gvozdenović, Milica M. and Maksimović, M. D. and Jugović, Branimir",
year = "2008",
abstract = "Electrochemically formed thin film polyaniline (PANI) anode and lead dioxide (PbO2) cathode, obtained from sulfuric acid solution, for potential applications as electrode materials in PANI|H2SO4|PbO2 aqueous based rechargeable power sources, have been studied using cyclic voltammetry and galvanostatic techniques. Based on the investigations of half cell reactions, the simulation of the charge/discharge characteristic of the possible cell has been done. © 2008 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Journal of Power Sources",
title = "Polyaniline as possible anode materials for the lead acid batteries",
pages = "635-640",
volume = "180",
number = "1",
doi = "10.1016/j.jpowsour.2008.02.022",
url = "https://hdl.handle.net/21.15107/rcub_dais_3584"
}

Grgur, B., Ristić, V., Gvozdenović, M. M., Maksimović, M. D.,& Jugović, B.. (2008). Polyaniline as possible anode materials for the lead acid batteries. in Journal of Power Sources
Elsevier., 180(1), 635-640.
https://doi.org/10.1016/j.jpowsour.2008.02.022
https://hdl.handle.net/21.15107/rcub_dais_3584

Grgur B, Ristić V, Gvozdenović MM, Maksimović MD, Jugović B. Polyaniline as possible anode materials for the lead acid batteries. in Journal of Power Sources. 2008;180(1):635-640.
doi:10.1016/j.jpowsour.2008.02.022
https://hdl.handle.net/21.15107/rcub_dais_3584 .

Grgur, Branimir, Ristić, V., Gvozdenović, Milica M., Maksimović, M. D., Jugović, Branimir, "Polyaniline as possible anode materials for the lead acid batteries" in Journal of Power Sources, 180, no. 1 (2008):635-640,
https://doi.org/10.1016/j.jpowsour.2008.02.022 .,
https://hdl.handle.net/21.15107/rcub_dais_3584 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Jugović, Branimir
AU  - Marinović, Vedrana
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/3583
AB  - Polypyrrole (PPy) thin film electrode was galvanostatically synthesized and characterized in 0.1 M HCl on graphite electrode as cathode materials for the aqueous-based rechargeable zinc batteries. The charge/discharge characteristics of PPy and zinc electrode in 0.1 M ammonium chloride and in the 0.1 M ammonium chloride with addition of 0.1 M sodium citrate were investigated. Electrochemical characteristic of possible Zn|PPy cell in chloride/citrate containing electrolyte was discussed and simulated. © 2008 Elsevier Ltd. All rights reserved.
PB  - Elsevier
T2  - Electrochimica Acta
T1  - Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries
SP  - 4627
EP  - 4632
VL  - 53
IS  - 14
DO  - 10.1016/j.electacta.2008.01.056
UR  - https://hdl.handle.net/21.15107/rcub_dais_3583
ER  - 

@article{
author = "Grgur, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Jugović, Branimir and Marinović, Vedrana",
year = "2008",
abstract = "Polypyrrole (PPy) thin film electrode was galvanostatically synthesized and characterized in 0.1 M HCl on graphite electrode as cathode materials for the aqueous-based rechargeable zinc batteries. The charge/discharge characteristics of PPy and zinc electrode in 0.1 M ammonium chloride and in the 0.1 M ammonium chloride with addition of 0.1 M sodium citrate were investigated. Electrochemical characteristic of possible Zn|PPy cell in chloride/citrate containing electrolyte was discussed and simulated. © 2008 Elsevier Ltd. All rights reserved.",
publisher = "Elsevier",
journal = "Electrochimica Acta",
title = "Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries",
pages = "4627-4632",
volume = "53",
number = "14",
doi = "10.1016/j.electacta.2008.01.056",
url = "https://hdl.handle.net/21.15107/rcub_dais_3583"
}

Grgur, B., Gvozdenović, M. M., Stevanović, J. S., Jugović, B.,& Marinović, V.. (2008). Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries. in Electrochimica Acta
Elsevier., 53(14), 4627-4632.
https://doi.org/10.1016/j.electacta.2008.01.056
https://hdl.handle.net/21.15107/rcub_dais_3583

Grgur B, Gvozdenović MM, Stevanović JS, Jugović B, Marinović V. Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries. in Electrochimica Acta. 2008;53(14):4627-4632.
doi:10.1016/j.electacta.2008.01.056
https://hdl.handle.net/21.15107/rcub_dais_3583 .

Grgur, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Jugović, Branimir, Marinović, Vedrana, "Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries" in Electrochimica Acta, 53, no. 14 (2008):4627-4632,
https://doi.org/10.1016/j.electacta.2008.01.056 .,
https://hdl.handle.net/21.15107/rcub_dais_3583 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Žugić, Dragana
AU  - Gvozdenović, Milica M.
AU  - Trišović, Tomislav
PY  - 2006
UR  - https://dais.sanu.ac.rs/123456789/11713
AB  - The kinetics of the oxidation Of D-glucose to D-gluconic acid by bromine in aqueous solution were studied using potentiometric techniques and theoretical considerations of complex bromine-bromide-pH equilibria. The pH has a strong influence on reaction rate. At pH  lt  8 the reaction is very slow, while in the pH range pH 8-9.5 the reaction is sufficiently fast and seems optimal for the reaction. The proposed active species at that pH region is hypobromous acid. At pH  gt  9.5, the reaction is further accelerated due to the formation of hypobromite. The proposed kinetics expression for gluconic acid formation, based on the determined kinetic parameters at pH 9.24, is of the form dc(GA)/dt = 160c(2)(G)c(0)(HOBr)c(0)(H+)c(0)(Br)
PB  - Oxford : Elsevier Sci Ltd.
T2  - Carbohydrate Research
T1  - A kinetic study of D-glucose oxidation by bromine in aqueous solutions
SP  - 1779
EP  - 1787
VL  - 341
IS  - 11
DO  - 10.1016/j.carres.2006.04.035
UR  - https://hdl.handle.net/21.15107/rcub_dais_11713
ER  - 

@article{
author = "Grgur, Branimir and Žugić, Dragana and Gvozdenović, Milica M. and Trišović, Tomislav",
year = "2006",
abstract = "The kinetics of the oxidation Of D-glucose to D-gluconic acid by bromine in aqueous solution were studied using potentiometric techniques and theoretical considerations of complex bromine-bromide-pH equilibria. The pH has a strong influence on reaction rate. At pH  lt  8 the reaction is very slow, while in the pH range pH 8-9.5 the reaction is sufficiently fast and seems optimal for the reaction. The proposed active species at that pH region is hypobromous acid. At pH  gt  9.5, the reaction is further accelerated due to the formation of hypobromite. The proposed kinetics expression for gluconic acid formation, based on the determined kinetic parameters at pH 9.24, is of the form dc(GA)/dt = 160c(2)(G)c(0)(HOBr)c(0)(H+)c(0)(Br)",
publisher = "Oxford : Elsevier Sci Ltd.",
journal = "Carbohydrate Research",
title = "A kinetic study of D-glucose oxidation by bromine in aqueous solutions",
pages = "1779-1787",
volume = "341",
number = "11",
doi = "10.1016/j.carres.2006.04.035",
url = "https://hdl.handle.net/21.15107/rcub_dais_11713"
}

Grgur, B., Žugić, D., Gvozdenović, M. M.,& Trišović, T.. (2006). A kinetic study of D-glucose oxidation by bromine in aqueous solutions. in Carbohydrate Research
Oxford : Elsevier Sci Ltd.., 341(11), 1779-1787.
https://doi.org/10.1016/j.carres.2006.04.035
https://hdl.handle.net/21.15107/rcub_dais_11713

Grgur B, Žugić D, Gvozdenović MM, Trišović T. A kinetic study of D-glucose oxidation by bromine in aqueous solutions. in Carbohydrate Research. 2006;341(11):1779-1787.
doi:10.1016/j.carres.2006.04.035
https://hdl.handle.net/21.15107/rcub_dais_11713 .

Grgur, Branimir, Žugić, Dragana, Gvozdenović, Milica M., Trišović, Tomislav, "A kinetic study of D-glucose oxidation by bromine in aqueous solutions" in Carbohydrate Research, 341, no. 11 (2006):1779-1787,
https://doi.org/10.1016/j.carres.2006.04.035 .,
https://hdl.handle.net/21.15107/rcub_dais_11713 .