TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16516
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Atanasoski, Vladimir
AU  - Petrović, Jovana
AU  - Popović Maneski, Lana
AU  - Miletić, Marjan
AU  - Babić, Miloš
AU  - Nikolić, Aleksandra
AU  - Panescu, Dorin
AU  - Ivanović, Marija D.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16515
AB  - Goal: Clinical interpretation of an electrocardiogram (ECG) can be detrimentally affected by noise. Removal of the electromyographic (EMG) noise is particularly challenging due to its spectral overlap with the QRS complex. The existing EMG-denoising algorithms often distort signal morphology, thus obscuring diagnostically relevant information. Methods: Here, a new iterative regeneration method (IRM) for efficient EMG-noise suppression is proposed. The main hypothesis is that the temporary removal of the dominant ECG components enables extraction of the noise with the minimum alteration to the signal. The method is validated on SimEMG database of simultaneously recorded reference and noisy signals, MIT-BIH arrhythmia database and synthesized ECG signals, both with the noise from MIT Noise Stress Test Database. Results: IRM denoising and morphology-preserving performance is superior to the wavelet- and FIR-based benchmark methods. Conclusions : IRM is reliable, computationally non-intensive, fast and applicable to any number of ECG channels recorded by mobile or standard ECG devices.
PB  - Institute of Electrical and Electronics Engineers (IEEE)
T2  - IEEE Open Journal of Engineering in Medicine and Biology
T1  - A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals
SP  - 1
EP  - 10
DO  - 10.1109/OJEMB.2024.3380352
UR  - https://hdl.handle.net/21.15107/rcub_dais_16515
ER  - 

@article{
author = "Atanasoski, Vladimir and Petrović, Jovana and Popović Maneski, Lana and Miletić, Marjan and Babić, Miloš and Nikolić, Aleksandra and Panescu, Dorin and Ivanović, Marija D.",
year = "2024",
abstract = "Goal: Clinical interpretation of an electrocardiogram (ECG) can be detrimentally affected by noise. Removal of the electromyographic (EMG) noise is particularly challenging due to its spectral overlap with the QRS complex. The existing EMG-denoising algorithms often distort signal morphology, thus obscuring diagnostically relevant information. Methods: Here, a new iterative regeneration method (IRM) for efficient EMG-noise suppression is proposed. The main hypothesis is that the temporary removal of the dominant ECG components enables extraction of the noise with the minimum alteration to the signal. The method is validated on SimEMG database of simultaneously recorded reference and noisy signals, MIT-BIH arrhythmia database and synthesized ECG signals, both with the noise from MIT Noise Stress Test Database. Results: IRM denoising and morphology-preserving performance is superior to the wavelet- and FIR-based benchmark methods. Conclusions : IRM is reliable, computationally non-intensive, fast and applicable to any number of ECG channels recorded by mobile or standard ECG devices.",
publisher = "Institute of Electrical and Electronics Engineers (IEEE)",
journal = "IEEE Open Journal of Engineering in Medicine and Biology",
title = "A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals",
pages = "1-10",
doi = "10.1109/OJEMB.2024.3380352",
url = "https://hdl.handle.net/21.15107/rcub_dais_16515"
}

Atanasoski, V., Petrović, J., Popović Maneski, L., Miletić, M., Babić, M., Nikolić, A., Panescu, D.,& Ivanović, M. D.. (2024). A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals. in IEEE Open Journal of Engineering in Medicine and Biology
Institute of Electrical and Electronics Engineers (IEEE)., 1-10.
https://doi.org/10.1109/OJEMB.2024.3380352
https://hdl.handle.net/21.15107/rcub_dais_16515

Atanasoski V, Petrović J, Popović Maneski L, Miletić M, Babić M, Nikolić A, Panescu D, Ivanović MD. A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals. in IEEE Open Journal of Engineering in Medicine and Biology. 2024;:1-10.
doi:10.1109/OJEMB.2024.3380352
https://hdl.handle.net/21.15107/rcub_dais_16515 .

Atanasoski, Vladimir, Petrović, Jovana, Popović Maneski, Lana, Miletić, Marjan, Babić, Miloš, Nikolić, Aleksandra, Panescu, Dorin, Ivanović, Marija D., "A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals" in IEEE Open Journal of Engineering in Medicine and Biology (2024):1-10,
https://doi.org/10.1109/OJEMB.2024.3380352 .,
https://hdl.handle.net/21.15107/rcub_dais_16515 .

TY  - JOUR
AU  - Guševac Stojanović, Ivana
AU  - Drakulić, Dunja
AU  - Todorović, Ana
AU  - Martinović, Jelena
AU  - Filipović, Nenad
AU  - Stojanović, Zoran
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16514
AB  - While the effects of chronic exposure to microplastic particles (MPs) are extensively studied, the outcomes of a single treatment have received relatively less attention. To investigate MPs’ potential acute toxicity, including their impact on general health status (victual consumption, sensorimotor deficits, and clinical toxicity signs) and serum biochemical parameters (markers of organ/tissue function and oxidative stress indicators), we administered thoroughly characterized MPs (1.4, 35, or 125 mg/kg), generated from polyethylene terephthalate (PET) bottles, to adult male Wistar rats via oral gavage. The MPs’ short-term effects were assessed with well-established tests and methods. The results point to the absence of sensorimotor deficits and clinical toxicity signs, while levels of markers of liver, heart, and kidney function were altered in all MP groups. Decreased victual consumption and increased levels of oxidative stress indicators were evident following treatment with the two higher MP doses. Presented data indicate that examined MPs are able to initiate the development of local changes in tissues and organs within a short time frame, potentially leading to their damage and dysfunction. This study may increase the awareness of the detrimental effects of plastic contamination, as even a single exposure to MPs may provoke adverse health outcomes.
PB  - Basel : MDPI AG
T2  - Toxics
T1  - Acute Toxicity Assessment of Orally Administered Microplastic Particles in Adult Male Wistar Rats
SP  - 167
VL  - 12
IS  - 3
DO  - 10.3390/toxics12030167
UR  - https://hdl.handle.net/21.15107/rcub_dais_16514
ER  - 

@article{
author = "Guševac Stojanović, Ivana and Drakulić, Dunja and Todorović, Ana and Martinović, Jelena and Filipović, Nenad and Stojanović, Zoran",
year = "2024",
abstract = "While the effects of chronic exposure to microplastic particles (MPs) are extensively studied, the outcomes of a single treatment have received relatively less attention. To investigate MPs’ potential acute toxicity, including their impact on general health status (victual consumption, sensorimotor deficits, and clinical toxicity signs) and serum biochemical parameters (markers of organ/tissue function and oxidative stress indicators), we administered thoroughly characterized MPs (1.4, 35, or 125 mg/kg), generated from polyethylene terephthalate (PET) bottles, to adult male Wistar rats via oral gavage. The MPs’ short-term effects were assessed with well-established tests and methods. The results point to the absence of sensorimotor deficits and clinical toxicity signs, while levels of markers of liver, heart, and kidney function were altered in all MP groups. Decreased victual consumption and increased levels of oxidative stress indicators were evident following treatment with the two higher MP doses. Presented data indicate that examined MPs are able to initiate the development of local changes in tissues and organs within a short time frame, potentially leading to their damage and dysfunction. This study may increase the awareness of the detrimental effects of plastic contamination, as even a single exposure to MPs may provoke adverse health outcomes.",
publisher = "Basel : MDPI AG",
journal = "Toxics",
title = "Acute Toxicity Assessment of Orally Administered Microplastic Particles in Adult Male Wistar Rats",
pages = "167",
volume = "12",
number = "3",
doi = "10.3390/toxics12030167",
url = "https://hdl.handle.net/21.15107/rcub_dais_16514"
}

Guševac Stojanović, I., Drakulić, D., Todorović, A., Martinović, J., Filipović, N.,& Stojanović, Z.. (2024). Acute Toxicity Assessment of Orally Administered Microplastic Particles in Adult Male Wistar Rats. in Toxics
Basel : MDPI AG., 12(3), 167.
https://doi.org/10.3390/toxics12030167
https://hdl.handle.net/21.15107/rcub_dais_16514

Guševac Stojanović I, Drakulić D, Todorović A, Martinović J, Filipović N, Stojanović Z. Acute Toxicity Assessment of Orally Administered Microplastic Particles in Adult Male Wistar Rats. in Toxics. 2024;12(3):167.
doi:10.3390/toxics12030167
https://hdl.handle.net/21.15107/rcub_dais_16514 .

Guševac Stojanović, Ivana, Drakulić, Dunja, Todorović, Ana, Martinović, Jelena, Filipović, Nenad, Stojanović, Zoran, "Acute Toxicity Assessment of Orally Administered Microplastic Particles in Adult Male Wistar Rats" in Toxics, 12, no. 3 (2024):167,
https://doi.org/10.3390/toxics12030167 .,
https://hdl.handle.net/21.15107/rcub_dais_16514 .

TY  - JOUR
AU  - Lazarević, Miloš M.
AU  - Ignjatović, Nenad
AU  - Mahlet, Qene
AU  - Bumah, Violet V.
AU  - Radunović, Milena
AU  - Milašin, Jelena
AU  - Uskoković, Dragan
AU  - Uskoković, Vuk
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16513
AB  - Hydroxyapatite (HAp) has been the main protagonist in the quest for an ideal biomaterial for regenerative medicine over the last half a century. To control its properties, this material has commonly been doped with chemical elements other than its natural stoichiometric constituents: Ca, O, P, and H. Here, we report on the first analysis of the biological response to germanium-doped hydroxyapatite (Ge-HAp). Cytotoxicity, osteogenic differentiation induction, and colony formation potential were measured on dental pulp stem cells, while the antimicrobial effect was assessed against Gram-negative Escherichia coli, Gram-positive methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans. All analyses were run in comparison to Ge-free HAp. Cell viability was inversely dependent on the nanoparticle concentration and incubation time. Adding Ge to HAp reduced cell viability relative to HAp after 24–72 h incubation periods, but the effect was reversed after longer incubations, when the viability of cells treated with low doses of Ge-HAp exceeded that of HAp-treated cells and became comparable with control culture. Both HAp and Ge-HAp induced mineral formation in the cell culture, but the effect was more pronounced for Ge-HAp. Likewise, relative to both control cells and cells exposed to HAp, Ge-HAp upregulated the expression of all three osteogenic markers analyzed, namely, alkaline phosphatase, RUNX2, and osteocalcin, exerting the key influence on osteogenesis in its early, differentiation stage. The colony formation capacity of stem cells, however, was impaired by HAp and even more so by Ge-HAp. The antimicrobial effect was dependent on the microorganisms tested. Thus, whereas the antimicrobial activity was absent against E. coli, it was evident against MRSA and C. albicans. While the antibacterial activity against MRSA was weakened by the addition of Ge to HAp, the antimycotic activity against C. albicans was intensified with the addition of Ge. These findings demonstrate a significant potential of Ge-doped HAp nanoparticles in regenerative medicine due to their pronounced biocompatibility, osteoinductivity, and antimicrobial activity.
PB  - American Chemical Society (ACS)
T2  - ACS Applied Nano Materials
T1  - Biocompatible Germanium-Doped Hydroxyapatite Nanoparticles for Promoting Osteogenic Differentiation and Antimicrobial Activity
DO  - 10.1021/acsanm.3c05974
UR  - https://hdl.handle.net/21.15107/rcub_dais_16513
ER  - 

@article{
author = "Lazarević, Miloš M. and Ignjatović, Nenad and Mahlet, Qene and Bumah, Violet V. and Radunović, Milena and Milašin, Jelena and Uskoković, Dragan and Uskoković, Vuk",
year = "2024",
abstract = "Hydroxyapatite (HAp) has been the main protagonist in the quest for an ideal biomaterial for regenerative medicine over the last half a century. To control its properties, this material has commonly been doped with chemical elements other than its natural stoichiometric constituents: Ca, O, P, and H. Here, we report on the first analysis of the biological response to germanium-doped hydroxyapatite (Ge-HAp). Cytotoxicity, osteogenic differentiation induction, and colony formation potential were measured on dental pulp stem cells, while the antimicrobial effect was assessed against Gram-negative Escherichia coli, Gram-positive methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans. All analyses were run in comparison to Ge-free HAp. Cell viability was inversely dependent on the nanoparticle concentration and incubation time. Adding Ge to HAp reduced cell viability relative to HAp after 24–72 h incubation periods, but the effect was reversed after longer incubations, when the viability of cells treated with low doses of Ge-HAp exceeded that of HAp-treated cells and became comparable with control culture. Both HAp and Ge-HAp induced mineral formation in the cell culture, but the effect was more pronounced for Ge-HAp. Likewise, relative to both control cells and cells exposed to HAp, Ge-HAp upregulated the expression of all three osteogenic markers analyzed, namely, alkaline phosphatase, RUNX2, and osteocalcin, exerting the key influence on osteogenesis in its early, differentiation stage. The colony formation capacity of stem cells, however, was impaired by HAp and even more so by Ge-HAp. The antimicrobial effect was dependent on the microorganisms tested. Thus, whereas the antimicrobial activity was absent against E. coli, it was evident against MRSA and C. albicans. While the antibacterial activity against MRSA was weakened by the addition of Ge to HAp, the antimycotic activity against C. albicans was intensified with the addition of Ge. These findings demonstrate a significant potential of Ge-doped HAp nanoparticles in regenerative medicine due to their pronounced biocompatibility, osteoinductivity, and antimicrobial activity.",
publisher = "American Chemical Society (ACS)",
journal = "ACS Applied Nano Materials",
title = "Biocompatible Germanium-Doped Hydroxyapatite Nanoparticles for Promoting Osteogenic Differentiation and Antimicrobial Activity",
doi = "10.1021/acsanm.3c05974",
url = "https://hdl.handle.net/21.15107/rcub_dais_16513"
}

Lazarević, M. M., Ignjatović, N., Mahlet, Q., Bumah, V. V., Radunović, M., Milašin, J., Uskoković, D.,& Uskoković, V.. (2024). Biocompatible Germanium-Doped Hydroxyapatite Nanoparticles for Promoting Osteogenic Differentiation and Antimicrobial Activity. in ACS Applied Nano Materials
American Chemical Society (ACS)..
https://doi.org/10.1021/acsanm.3c05974
https://hdl.handle.net/21.15107/rcub_dais_16513

Lazarević MM, Ignjatović N, Mahlet Q, Bumah VV, Radunović M, Milašin J, Uskoković D, Uskoković V. Biocompatible Germanium-Doped Hydroxyapatite Nanoparticles for Promoting Osteogenic Differentiation and Antimicrobial Activity. in ACS Applied Nano Materials. 2024;.
doi:10.1021/acsanm.3c05974
https://hdl.handle.net/21.15107/rcub_dais_16513 .

Lazarević, Miloš M., Ignjatović, Nenad, Mahlet, Qene, Bumah, Violet V., Radunović, Milena, Milašin, Jelena, Uskoković, Dragan, Uskoković, Vuk, "Biocompatible Germanium-Doped Hydroxyapatite Nanoparticles for Promoting Osteogenic Differentiation and Antimicrobial Activity" in ACS Applied Nano Materials (2024),
https://doi.org/10.1021/acsanm.3c05974 .,
https://hdl.handle.net/21.15107/rcub_dais_16513 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16243
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Radonjić, Aleksandar
AU  - Vujičić, Vladimir
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16385
AB  - This paper presents two classes of integer codes that are suitable for use in local area networks. The first class of codes can correct h-bit burst errors within one b-bit byte and detect l-bit burst errors within one b-bit byte (1 ≤ h < l < b), while the second class of codes, in addition to correcting/detecting the mentioned types of errors, can also detect d-bit burst errors within two b-bit bytes (1 ≤ d < b). Both classes of codes are defined over integer rings and are generated by computer search. To evaluate the performance of both classes of codes, we analyze their probabilities of incorrect decoding for binary symmetric and bursty channel.
PB  - Springer Science and Business Media LLC
T2  - Computational and Applied Mathematics
T1  - Integer codes correcting/detecting burst errors within one byte and detecting burst errors within two bytes
VL  - 43
IS  - 2
DO  - 10.1007/s40314-023-02435-2
UR  - https://hdl.handle.net/21.15107/rcub_dais_16385
ER  - 

@article{
author = "Radonjić, Aleksandar and Vujičić, Vladimir",
year = "2024",
abstract = "This paper presents two classes of integer codes that are suitable for use in local area networks. The first class of codes can correct h-bit burst errors within one b-bit byte and detect l-bit burst errors within one b-bit byte (1 ≤ h < l < b), while the second class of codes, in addition to correcting/detecting the mentioned types of errors, can also detect d-bit burst errors within two b-bit bytes (1 ≤ d < b). Both classes of codes are defined over integer rings and are generated by computer search. To evaluate the performance of both classes of codes, we analyze their probabilities of incorrect decoding for binary symmetric and bursty channel.",
publisher = "Springer Science and Business Media LLC",
journal = "Computational and Applied Mathematics",
title = "Integer codes correcting/detecting burst errors within one byte and detecting burst errors within two bytes",
volume = "43",
number = "2",
doi = "10.1007/s40314-023-02435-2",
url = "https://hdl.handle.net/21.15107/rcub_dais_16385"
}

Radonjić, A.,& Vujičić, V.. (2024). Integer codes correcting/detecting burst errors within one byte and detecting burst errors within two bytes. in Computational and Applied Mathematics
Springer Science and Business Media LLC., 43(2).
https://doi.org/10.1007/s40314-023-02435-2
https://hdl.handle.net/21.15107/rcub_dais_16385

Radonjić A, Vujičić V. Integer codes correcting/detecting burst errors within one byte and detecting burst errors within two bytes. in Computational and Applied Mathematics. 2024;43(2).
doi:10.1007/s40314-023-02435-2
https://hdl.handle.net/21.15107/rcub_dais_16385 .

Radonjić, Aleksandar, Vujičić, Vladimir, "Integer codes correcting/detecting burst errors within one byte and detecting burst errors within two bytes" in Computational and Applied Mathematics, 43, no. 2 (2024),
https://doi.org/10.1007/s40314-023-02435-2 .,
https://hdl.handle.net/21.15107/rcub_dais_16385 .

Sknepnek, A., Filipović, S., Pavlović, V. B., Mirković, N., Miletić, D., Gržetić, J.,& Mirković, M.. (2024). Effects of Synthesis Parameters on Structure and Antimicrobial Properties of Bacterial Cellulose/Hydroxyapatite/TiO2 Polymer–Ceramic Composite Material. in Polymers
Basel : MDPI AG., 16(4), 470.
https://doi.org/10.3390/polym16040470
https://hdl.handle.net/21.15107/rcub_dais_16384

Sknepnek A, Filipović S, Pavlović VB, Mirković N, Miletić D, Gržetić J, Mirković M. Effects of Synthesis Parameters on Structure and Antimicrobial Properties of Bacterial Cellulose/Hydroxyapatite/TiO2 Polymer–Ceramic Composite Material. in Polymers. 2024;16(4):470.
doi:10.3390/polym16040470
https://hdl.handle.net/21.15107/rcub_dais_16384 .

Sknepnek, Aleksandra, Filipović, Suzana, Pavlović, Vladimir B., Mirković, Nemanja, Miletić, Dunja, Gržetić, Jelena, Mirković, Miljana, "Effects of Synthesis Parameters on Structure and Antimicrobial Properties of Bacterial Cellulose/Hydroxyapatite/TiO2 Polymer–Ceramic Composite Material" in Polymers, 16, no. 4 (2024):470,
https://doi.org/10.3390/polym16040470 .,
https://hdl.handle.net/21.15107/rcub_dais_16384 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Fahrenholtz, William
AU  - Smith, Steven
AU  - Mirković, Miljana M.
AU  - Peleš Tadić, Adriana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16383
AB  - Magnesium titanate ceramics were prepared by reactive spark plasma sintering (SPS) at 1200 °C for 5 min. Prior to sintering, MgO and TiO2 powders were mixed by high energy ball milling (HEBM) for 15, 30, or 60 min. The effect of milling time on phase composition was analyzed by X-ray diffraction (XRD) for milled powders and sintered specimens. The morphology of the sintered ceramics was investigated by scanning electron microscopy (SEM), while elemental distribution was determined by energy dispersive spectroscopy (EDS). The presence of the MgTi2O5 phase was detected in XRD and was confirmed by EDS analysis. Microcracking was observed for specimens prepared with longer milling times and attributed to the coefficient of thermal expansion (CTE) mismatch dominantly due to the anisotropic crystal structure of MgTiO3 phase. The sample milled for 15 min showed the highest Vickers hardness due to less or no microcracking and nearly full density. The dielectric measurements in the range of 10 Hz–250 MHz demonstrated extremely high dielectric permittivity, as high as 104 at 1 kHz. An increase in loss tangents was observed due to oxygen vacancy formation, which was promoted by the vacuum environment during SPS. Oxygen vacancy-related dielectric relaxation was also detected and explained.
T2  - Ceramics International
T1  - Spark plasma sintering of magnesium titanate ceramics
DO  - 10.1016/j.ceramint.2024.02.004
UR  - https://hdl.handle.net/21.15107/rcub_dais_16383
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Fahrenholtz, William and Smith, Steven and Mirković, Miljana M. and Peleš Tadić, Adriana and Petrović, Jovana and Đorđević, Antonije",
year = "2024",
abstract = "Magnesium titanate ceramics were prepared by reactive spark plasma sintering (SPS) at 1200 °C for 5 min. Prior to sintering, MgO and TiO2 powders were mixed by high energy ball milling (HEBM) for 15, 30, or 60 min. The effect of milling time on phase composition was analyzed by X-ray diffraction (XRD) for milled powders and sintered specimens. The morphology of the sintered ceramics was investigated by scanning electron microscopy (SEM), while elemental distribution was determined by energy dispersive spectroscopy (EDS). The presence of the MgTi2O5 phase was detected in XRD and was confirmed by EDS analysis. Microcracking was observed for specimens prepared with longer milling times and attributed to the coefficient of thermal expansion (CTE) mismatch dominantly due to the anisotropic crystal structure of MgTiO3 phase. The sample milled for 15 min showed the highest Vickers hardness due to less or no microcracking and nearly full density. The dielectric measurements in the range of 10 Hz–250 MHz demonstrated extremely high dielectric permittivity, as high as 104 at 1 kHz. An increase in loss tangents was observed due to oxygen vacancy formation, which was promoted by the vacuum environment during SPS. Oxygen vacancy-related dielectric relaxation was also detected and explained.",
journal = "Ceramics International",
title = "Spark plasma sintering of magnesium titanate ceramics",
doi = "10.1016/j.ceramint.2024.02.004",
url = "https://hdl.handle.net/21.15107/rcub_dais_16383"
}

Filipović, S., Obradović, N., Fahrenholtz, W., Smith, S., Mirković, M. M., Peleš Tadić, A., Petrović, J.,& Đorđević, A.. (2024). Spark plasma sintering of magnesium titanate ceramics. in Ceramics International.
https://doi.org/10.1016/j.ceramint.2024.02.004
https://hdl.handle.net/21.15107/rcub_dais_16383

Filipović S, Obradović N, Fahrenholtz W, Smith S, Mirković MM, Peleš Tadić A, Petrović J, Đorđević A. Spark plasma sintering of magnesium titanate ceramics. in Ceramics International. 2024;.
doi:10.1016/j.ceramint.2024.02.004
https://hdl.handle.net/21.15107/rcub_dais_16383 .

Filipović, Suzana, Obradović, Nina, Fahrenholtz, William, Smith, Steven, Mirković, Miljana M., Peleš Tadić, Adriana, Petrović, Jovana, Đorđević, Antonije, "Spark plasma sintering of magnesium titanate ceramics" in Ceramics International (2024),
https://doi.org/10.1016/j.ceramint.2024.02.004 .,
https://hdl.handle.net/21.15107/rcub_dais_16383 .

Gezović, A., Milović, M., Bajuk-Bogdanović, D., Grudić, V., Dominko, R., Mentus, S.,& Vujković, M. J.. (2024). An effective approach to reaching the theoretical capacity of a low-cost and environmentally friendly Na4Fe3(PO4)2(P2O7) cathode for Na-ion batteries. in Electrochimica Acta
Elsevier BV., 476, 143718.
https://doi.org/10.1016/j.electacta.2023.143718
https://hdl.handle.net/21.15107/rcub_dais_16379

Gezović A, Milović M, Bajuk-Bogdanović D, Grudić V, Dominko R, Mentus S, Vujković MJ. An effective approach to reaching the theoretical capacity of a low-cost and environmentally friendly Na4Fe3(PO4)2(P2O7) cathode for Na-ion batteries. in Electrochimica Acta. 2024;476:143718.
doi:10.1016/j.electacta.2023.143718
https://hdl.handle.net/21.15107/rcub_dais_16379 .

Gezović, Aleksandra, Milović, Miloš, Bajuk-Bogdanović, Danica, Grudić, Veselinka, Dominko, Robert, Mentus, Slavko, Vujković, Milica J., "An effective approach to reaching the theoretical capacity of a low-cost and environmentally friendly Na4Fe3(PO4)2(P2O7) cathode for Na-ion batteries" in Electrochimica Acta, 476 (2024):143718,
https://doi.org/10.1016/j.electacta.2023.143718 .,
https://hdl.handle.net/21.15107/rcub_dais_16379 .

TY  - JOUR
AU  - Mitrašinović, Aleksandar
AU  - Nešković, Jasmina
AU  - Polavder, Svetlana
AU  - Petković, Sandra
AU  - Praštalo, Željko
AU  - Labus, Nebojša
AU  - Radosavljević, Milinko
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16380
AB  - Advancements in computer capabilities enable predicting process outcomes that earlier could only be assessed after post-process analyses. In aerospace and automotive industries it is important to predict parts properties before their formation from liquid alloys. In this work, the logistic function was used to predict the evaporation rates of the most detrimental impurities, if the temperature of the liquid aluminum alloy was known. Then, parameters of the logistic function were used to determine the transition points where the reaction order was changing. Samples were heated to 610 °C, 660 °C, 710 °C, and 760 °C for one hour, after which the chemical analyses were performed and evaporation rates were calculated for Cd, Hg, Pb and Zn elements. The pressure inside the encapsulated area was maintained at 0.97 kPa. Whereas parameters that define the evaporation rate increase with the temperature increase, the maximum evaporation rates were deduced from the experimental data and fitted into the logistic function. The elemental evaporation in liquid-aluminum alloys is the best defined by the logistic function, since transitions from the first to zero-order-governed evaporation reactions have nonsymmetrical evaporation rate slopes between the lowest and the highest evaporation rate point.
PB  - Basel : MDPI AG
T2  - Materials
T1  - Modeling of Impurities Evaporation Reaction Order in Aluminum Alloys by the Parametric Fitting of the Logistic Function
SP  - 728
VL  - 17
IS  - 3
DO  - 10.3390/ma17030728
UR  - https://hdl.handle.net/21.15107/rcub_dais_16380
ER  - 

@article{
author = "Mitrašinović, Aleksandar and Nešković, Jasmina and Polavder, Svetlana and Petković, Sandra and Praštalo, Željko and Labus, Nebojša and Radosavljević, Milinko",
year = "2024",
abstract = "Advancements in computer capabilities enable predicting process outcomes that earlier could only be assessed after post-process analyses. In aerospace and automotive industries it is important to predict parts properties before their formation from liquid alloys. In this work, the logistic function was used to predict the evaporation rates of the most detrimental impurities, if the temperature of the liquid aluminum alloy was known. Then, parameters of the logistic function were used to determine the transition points where the reaction order was changing. Samples were heated to 610 °C, 660 °C, 710 °C, and 760 °C for one hour, after which the chemical analyses were performed and evaporation rates were calculated for Cd, Hg, Pb and Zn elements. The pressure inside the encapsulated area was maintained at 0.97 kPa. Whereas parameters that define the evaporation rate increase with the temperature increase, the maximum evaporation rates were deduced from the experimental data and fitted into the logistic function. The elemental evaporation in liquid-aluminum alloys is the best defined by the logistic function, since transitions from the first to zero-order-governed evaporation reactions have nonsymmetrical evaporation rate slopes between the lowest and the highest evaporation rate point.",
publisher = "Basel : MDPI AG",
journal = "Materials",
title = "Modeling of Impurities Evaporation Reaction Order in Aluminum Alloys by the Parametric Fitting of the Logistic Function",
pages = "728",
volume = "17",
number = "3",
doi = "10.3390/ma17030728",
url = "https://hdl.handle.net/21.15107/rcub_dais_16380"
}

Mitrašinović, A., Nešković, J., Polavder, S., Petković, S., Praštalo, Ž., Labus, N.,& Radosavljević, M.. (2024). Modeling of Impurities Evaporation Reaction Order in Aluminum Alloys by the Parametric Fitting of the Logistic Function. in Materials
Basel : MDPI AG., 17(3), 728.
https://doi.org/10.3390/ma17030728
https://hdl.handle.net/21.15107/rcub_dais_16380

Mitrašinović A, Nešković J, Polavder S, Petković S, Praštalo Ž, Labus N, Radosavljević M. Modeling of Impurities Evaporation Reaction Order in Aluminum Alloys by the Parametric Fitting of the Logistic Function. in Materials. 2024;17(3):728.
doi:10.3390/ma17030728
https://hdl.handle.net/21.15107/rcub_dais_16380 .

Mitrašinović, Aleksandar, Nešković, Jasmina, Polavder, Svetlana, Petković, Sandra, Praštalo, Željko, Labus, Nebojša, Radosavljević, Milinko, "Modeling of Impurities Evaporation Reaction Order in Aluminum Alloys by the Parametric Fitting of the Logistic Function" in Materials, 17, no. 3 (2024):728,
https://doi.org/10.3390/ma17030728 .,
https://hdl.handle.net/21.15107/rcub_dais_16380 .

TY  - JOUR
AU  - Radan, Milica
AU  - Ćujić Nikolić, Nada
AU  - Kuzmanović Nedeljković, Snežana
AU  - Mutavski, Zorana
AU  - Krgović, Nemanja
AU  - Stević, Tatjana
AU  - Marković, Smilja
AU  - Jovanović, Aleksandra
AU  - Živković, Jelena
AU  - Šavikin, Katarina
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16332
AB  - Recovering the bioactive components from pomegranate peel (PP) in the fruit-processing industry has attracted great attention in terms of minimizing the waste burden, as well as providing a new source of a multitude of functional compounds. The present study aimed to develop a feasible microencapsulation process of PP extract by using pectin and a pectin/2-hydroxypropyl-β-cyclodextrin (HP-β-CD) blend as coating materials. Microsized powders obtained by a spray drying technique were examined in terms of technological characteristics, exhibiting high powder yield and desirable moisture content, flowability, and cohesive properties. Assuming that the interactions with the used biopolymers occur on the surface hydrophobic domain, their presence significantly improved the thermal stability of the microencapsulated powders up to 200 °C. The health-promoting effects of PP have been associated with its high content in ellagitannins, particularly punicalagin. The obtained PP powders exhibited strong antioxidant and hypoglycemic potential, while an antimicrobial assay revealed their potent activity against Gram-positive bacteria. Additionally, an in vitro release study suggested that the used biopolymers can modify the release of target bioactive compounds, thus establishing a basis for developing an oral-controlled release system. Altogether, biowaste valorization from PP by the production of effective multifunctional microsized powders represents a sustainable way to obtain novel nutraceuticals and/or pharmaceuticals.
PB  - Basel : MDPI AG
T2  - Plants
T1  - Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals
SP  - 281
VL  - 13
IS  - 2
DO  - 10.3390/plants13020281
UR  - https://hdl.handle.net/21.15107/rcub_dais_16332
ER  - 

@article{
author = "Radan, Milica and Ćujić Nikolić, Nada and Kuzmanović Nedeljković, Snežana and Mutavski, Zorana and Krgović, Nemanja and Stević, Tatjana and Marković, Smilja and Jovanović, Aleksandra and Živković, Jelena and Šavikin, Katarina",
year = "2024",
abstract = "Recovering the bioactive components from pomegranate peel (PP) in the fruit-processing industry has attracted great attention in terms of minimizing the waste burden, as well as providing a new source of a multitude of functional compounds. The present study aimed to develop a feasible microencapsulation process of PP extract by using pectin and a pectin/2-hydroxypropyl-β-cyclodextrin (HP-β-CD) blend as coating materials. Microsized powders obtained by a spray drying technique were examined in terms of technological characteristics, exhibiting high powder yield and desirable moisture content, flowability, and cohesive properties. Assuming that the interactions with the used biopolymers occur on the surface hydrophobic domain, their presence significantly improved the thermal stability of the microencapsulated powders up to 200 °C. The health-promoting effects of PP have been associated with its high content in ellagitannins, particularly punicalagin. The obtained PP powders exhibited strong antioxidant and hypoglycemic potential, while an antimicrobial assay revealed their potent activity against Gram-positive bacteria. Additionally, an in vitro release study suggested that the used biopolymers can modify the release of target bioactive compounds, thus establishing a basis for developing an oral-controlled release system. Altogether, biowaste valorization from PP by the production of effective multifunctional microsized powders represents a sustainable way to obtain novel nutraceuticals and/or pharmaceuticals.",
publisher = "Basel : MDPI AG",
journal = "Plants",
title = "Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals",
pages = "281",
volume = "13",
number = "2",
doi = "10.3390/plants13020281",
url = "https://hdl.handle.net/21.15107/rcub_dais_16332"
}

Radan, M., Ćujić Nikolić, N., Kuzmanović Nedeljković, S., Mutavski, Z., Krgović, N., Stević, T., Marković, S., Jovanović, A., Živković, J.,& Šavikin, K.. (2024). Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals. in Plants
Basel : MDPI AG., 13(2), 281.
https://doi.org/10.3390/plants13020281
https://hdl.handle.net/21.15107/rcub_dais_16332

Radan M, Ćujić Nikolić N, Kuzmanović Nedeljković S, Mutavski Z, Krgović N, Stević T, Marković S, Jovanović A, Živković J, Šavikin K. Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals. in Plants. 2024;13(2):281.
doi:10.3390/plants13020281
https://hdl.handle.net/21.15107/rcub_dais_16332 .

Radan, Milica, Ćujić Nikolić, Nada, Kuzmanović Nedeljković, Snežana, Mutavski, Zorana, Krgović, Nemanja, Stević, Tatjana, Marković, Smilja, Jovanović, Aleksandra, Živković, Jelena, Šavikin, Katarina, "Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals" in Plants, 13, no. 2 (2024):281,
https://doi.org/10.3390/plants13020281 .,
https://hdl.handle.net/21.15107/rcub_dais_16332 .

TY  - JOUR
AU  - Milić, Mirjana
AU  - Jović Orsini, Nataša
AU  - Marković, Smilja
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/15767
AB  - Four samples containing magnetic iron oxide nanoparticles (MIONs) of various sizes are prepared employing a simple low-temperature method of oxidative precipitation from FeCl2∙4H2O-NaOH-NaNO3 aqueous solution. For the preparation of two samples, the usual oxidation-precipitation synthesis protocol is modified by using ethylenediaminetetraacetic acid (EDTA) chelating agent as a stabilizer of the Fe2+ ions in a solution, which results in the partial capping of the prepared MIONs with EDTA molecules. Three out of four samples are subjected to citric acid (CA) functionalization in the post synthesis protocol. Structural and magnetic properties of the synthesized MIONs are assessed using various experimental techniques (XRD, TEM, Fourier transform infrared, dynamic light scattering, Mössbauer, and SQUID). The average size of spherical-like MIONs is tuned from 7 nm to 38 nm by changing the synthesis protocol. Their room temperature saturation magnetization, M s, is in the range of 43 to 91 emu g−1. Magnetic heating ability, expressed via specific absorption rate value, which ranges from 139 to 390 W/gFe, is discussed in relation to their structural and magnetic properties and the possible energy dissipation mechanisms involved. The best heating performance is exhibited by the sample decorated with EDTA and with a bimodal size distribution with average particle sizes of 14 and 37 nm and M s = 87 emu g−1. Though this sample contains particles prone to form aggregates, capping with EDTA provides good colloidal stability of this sample, thus preserving the magnetic heating ability. It is demonstrated that two samples, consisting of 7 nm-sized CA- or 14 nm-sized EDTA/CA-functionalized superparamagnetic MIONs, with a similar hydrodynamic radius, heat in a very similar way in the relatively fast oscillating alternating current magnetic field, f = 577 kHz.
T2  - Journal of Physics D: Applied Physics
T1  - CA and/or EDTA functionalized magnetic iron oxide nanoparticles by oxidative precipitation from FeCl2 solution: structural and magnetic study
SP  - 025001
VL  - 57
IS  - 2
DO  - 10.1088/1361-6463/acff06
UR  - https://hdl.handle.net/21.15107/rcub_dais_15767
ER  - 

@article{
author = "Milić, Mirjana and Jović Orsini, Nataša and Marković, Smilja",
year = "2024",
abstract = "Four samples containing magnetic iron oxide nanoparticles (MIONs) of various sizes are prepared employing a simple low-temperature method of oxidative precipitation from FeCl2∙4H2O-NaOH-NaNO3 aqueous solution. For the preparation of two samples, the usual oxidation-precipitation synthesis protocol is modified by using ethylenediaminetetraacetic acid (EDTA) chelating agent as a stabilizer of the Fe2+ ions in a solution, which results in the partial capping of the prepared MIONs with EDTA molecules. Three out of four samples are subjected to citric acid (CA) functionalization in the post synthesis protocol. Structural and magnetic properties of the synthesized MIONs are assessed using various experimental techniques (XRD, TEM, Fourier transform infrared, dynamic light scattering, Mössbauer, and SQUID). The average size of spherical-like MIONs is tuned from 7 nm to 38 nm by changing the synthesis protocol. Their room temperature saturation magnetization, M s, is in the range of 43 to 91 emu g−1. Magnetic heating ability, expressed via specific absorption rate value, which ranges from 139 to 390 W/gFe, is discussed in relation to their structural and magnetic properties and the possible energy dissipation mechanisms involved. The best heating performance is exhibited by the sample decorated with EDTA and with a bimodal size distribution with average particle sizes of 14 and 37 nm and M s = 87 emu g−1. Though this sample contains particles prone to form aggregates, capping with EDTA provides good colloidal stability of this sample, thus preserving the magnetic heating ability. It is demonstrated that two samples, consisting of 7 nm-sized CA- or 14 nm-sized EDTA/CA-functionalized superparamagnetic MIONs, with a similar hydrodynamic radius, heat in a very similar way in the relatively fast oscillating alternating current magnetic field, f = 577 kHz.",
journal = "Journal of Physics D: Applied Physics",
title = "CA and/or EDTA functionalized magnetic iron oxide nanoparticles by oxidative precipitation from FeCl2 solution: structural and magnetic study",
pages = "025001",
volume = "57",
number = "2",
doi = "10.1088/1361-6463/acff06",
url = "https://hdl.handle.net/21.15107/rcub_dais_15767"
}

Milić, M., Jović Orsini, N.,& Marković, S.. (2024). CA and/or EDTA functionalized magnetic iron oxide nanoparticles by oxidative precipitation from FeCl2 solution: structural and magnetic study. in Journal of Physics D: Applied Physics, 57(2), 025001.
https://doi.org/10.1088/1361-6463/acff06
https://hdl.handle.net/21.15107/rcub_dais_15767

Milić M, Jović Orsini N, Marković S. CA and/or EDTA functionalized magnetic iron oxide nanoparticles by oxidative precipitation from FeCl2 solution: structural and magnetic study. in Journal of Physics D: Applied Physics. 2024;57(2):025001.
doi:10.1088/1361-6463/acff06
https://hdl.handle.net/21.15107/rcub_dais_15767 .

Milić, Mirjana, Jović Orsini, Nataša, Marković, Smilja, "CA and/or EDTA functionalized magnetic iron oxide nanoparticles by oxidative precipitation from FeCl2 solution: structural and magnetic study" in Journal of Physics D: Applied Physics, 57, no. 2 (2024):025001,
https://doi.org/10.1088/1361-6463/acff06 .,
https://hdl.handle.net/21.15107/rcub_dais_15767 .

TY  - JOUR
AU  - Dinić, Ivana
AU  - Vuković, Marina
AU  - Rabanal, Maria Eugenia
AU  - Milošević, Milica
AU  - Bukumira, Marta
AU  - Tomić, Nina
AU  - Tomić, Miloš
AU  - Mančić, Lidija
AU  - Ignjatović, Nenad
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16211
AB  - Y0.8−xGdxF3:Yb/Er mesocrystals with a biocompatible surface and diverse morphological characteristics were successfully synthesized using chitosan-assisted solvothermal processing. Their structural properties, studied using X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy and energy dispersive X-ray analysis, were further correlated with the up-conversion emission (λexc = 976 nm) recorded in function of temperature. Based on the change in the visible green emissions originating from the thermally coupled 2H11/2 and 4S3/2 levels of Er3+, the corresponding LIR was acquired in the physiologically relevant range of temperatures (25–50 °C). The detected absolute sensitivity of about 0.0042 °C−1, along with the low cytotoxicity toward both normal human lung fibroblasts (MRC-5) and cancerous lung epithelial (A549) cells, indicate a potential for use in temperature sensing in biomedicine. Additionally, their enhanced internalization in cells, without suppression of cell viability, enabled in vitro labeling of cancer and healthy cells upon 976 nm laser irradiation.
PB  - Basel : MDPI AG
T2  - Journal of Functional Biomaterials
T1  - Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals
SP  - 6
VL  - 15
IS  - 1
DO  - 10.3390/jfb15010006
UR  - https://hdl.handle.net/21.15107/rcub_dais_16211
ER  - 

@article{
author = "Dinić, Ivana and Vuković, Marina and Rabanal, Maria Eugenia and Milošević, Milica and Bukumira, Marta and Tomić, Nina and Tomić, Miloš and Mančić, Lidija and Ignjatović, Nenad",
year = "2024",
abstract = "Y0.8−xGdxF3:Yb/Er mesocrystals with a biocompatible surface and diverse morphological characteristics were successfully synthesized using chitosan-assisted solvothermal processing. Their structural properties, studied using X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy and energy dispersive X-ray analysis, were further correlated with the up-conversion emission (λexc = 976 nm) recorded in function of temperature. Based on the change in the visible green emissions originating from the thermally coupled 2H11/2 and 4S3/2 levels of Er3+, the corresponding LIR was acquired in the physiologically relevant range of temperatures (25–50 °C). The detected absolute sensitivity of about 0.0042 °C−1, along with the low cytotoxicity toward both normal human lung fibroblasts (MRC-5) and cancerous lung epithelial (A549) cells, indicate a potential for use in temperature sensing in biomedicine. Additionally, their enhanced internalization in cells, without suppression of cell viability, enabled in vitro labeling of cancer and healthy cells upon 976 nm laser irradiation.",
publisher = "Basel : MDPI AG",
journal = "Journal of Functional Biomaterials",
title = "Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals",
pages = "6",
volume = "15",
number = "1",
doi = "10.3390/jfb15010006",
url = "https://hdl.handle.net/21.15107/rcub_dais_16211"
}

Dinić, I., Vuković, M., Rabanal, M. E., Milošević, M., Bukumira, M., Tomić, N., Tomić, M., Mančić, L.,& Ignjatović, N.. (2024). Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals. in Journal of Functional Biomaterials
Basel : MDPI AG., 15(1), 6.
https://doi.org/10.3390/jfb15010006
https://hdl.handle.net/21.15107/rcub_dais_16211

Dinić I, Vuković M, Rabanal ME, Milošević M, Bukumira M, Tomić N, Tomić M, Mančić L, Ignjatović N. Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals. in Journal of Functional Biomaterials. 2024;15(1):6.
doi:10.3390/jfb15010006
https://hdl.handle.net/21.15107/rcub_dais_16211 .

Dinić, Ivana, Vuković, Marina, Rabanal, Maria Eugenia, Milošević, Milica, Bukumira, Marta, Tomić, Nina, Tomić, Miloš, Mančić, Lidija, Ignjatović, Nenad, "Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals" in Journal of Functional Biomaterials, 15, no. 1 (2024):6,
https://doi.org/10.3390/jfb15010006 .,
https://hdl.handle.net/21.15107/rcub_dais_16211 .

TY  - CONF
AU  - Stamenković, Tijana
AU  - Ranđelović, Marjan
AU  - Čebela, Maria
AU  - Vuković, Marina
AU  - Dinić, Ivana
AU  - Mančić, Lidija
AU  - Lojpur, Vesna
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14662
AB  - The aim of this research was to investigate for the first-time photocatalytic degradation of methylene blue over SrGd2O4 powders co-doped with constant Er3+ (0.5 at.%) and different Yb3+ (1, 2.5 and 5 at.%) concentrations. Samples were successfully prepared via sol-gel assisted combustion method. They exhibit photoluminescence properties which are manifested as red emission at 661 nm (4F9/2 → 4I15/2) and two green emissions at 551 and 523 nm (4S3/2 → 4I15/2 and 2H11/2 → 4I15/2). X-ray Powder Diffraction pattern proved that all samples crystallize as a pure orthorhombic phase. Scanning electron microscopy was used for morphology characterization and it revealed the existence of porous agglomerated round-shaped particles. Energy dispersive X-ray spectroscopy showed the presence of dopant ions and even distribution of all constituting elements. To calculate the energy band gap, UV-VIS diffuse reflectance spectroscopy was performed and a value of 4.3 eV was obtained, as well as the four additional values from the bands at lower energies. Photocatalytic degradation of methylene blue was monitored using UV-VIS absorption spectroscopy. Obtained results were promising since after 4 h of exposure to the simulating Sun irradiation, more than 50% of the starting dye concentration was mineralized.
PB  - Belgrade : Institut za multidisciplinarna istraživanja
C3  - Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia
T1  - Characterization and photocatalytic activity of newly synthesized Er and Yb doped SrGd2O4 nanophosphorus
UR  - https://hdl.handle.net/21.15107/rcub_dais_14662
ER  - 

@conference{
author = "Stamenković, Tijana and Ranđelović, Marjan and Čebela, Maria and Vuković, Marina and Dinić, Ivana and Mančić, Lidija and Lojpur, Vesna",
year = "2023",
abstract = "The aim of this research was to investigate for the first-time photocatalytic degradation of methylene blue over SrGd2O4 powders co-doped with constant Er3+ (0.5 at.%) and different Yb3+ (1, 2.5 and 5 at.%) concentrations. Samples were successfully prepared via sol-gel assisted combustion method. They exhibit photoluminescence properties which are manifested as red emission at 661 nm (4F9/2 → 4I15/2) and two green emissions at 551 and 523 nm (4S3/2 → 4I15/2 and 2H11/2 → 4I15/2). X-ray Powder Diffraction pattern proved that all samples crystallize as a pure orthorhombic phase. Scanning electron microscopy was used for morphology characterization and it revealed the existence of porous agglomerated round-shaped particles. Energy dispersive X-ray spectroscopy showed the presence of dopant ions and even distribution of all constituting elements. To calculate the energy band gap, UV-VIS diffuse reflectance spectroscopy was performed and a value of 4.3 eV was obtained, as well as the four additional values from the bands at lower energies. Photocatalytic degradation of methylene blue was monitored using UV-VIS absorption spectroscopy. Obtained results were promising since after 4 h of exposure to the simulating Sun irradiation, more than 50% of the starting dye concentration was mineralized.",
publisher = "Belgrade : Institut za multidisciplinarna istraživanja",
journal = "Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia",
title = "Characterization and photocatalytic activity of newly synthesized Er and Yb doped SrGd2O4 nanophosphorus",
url = "https://hdl.handle.net/21.15107/rcub_dais_14662"
}

Stamenković, T., Ranđelović, M., Čebela, M., Vuković, M., Dinić, I., Mančić, L.,& Lojpur, V.. (2023). Characterization and photocatalytic activity of newly synthesized Er and Yb doped SrGd2O4 nanophosphorus. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia
Belgrade : Institut za multidisciplinarna istraživanja..
https://hdl.handle.net/21.15107/rcub_dais_14662

Stamenković T, Ranđelović M, Čebela M, Vuković M, Dinić I, Mančić L, Lojpur V. Characterization and photocatalytic activity of newly synthesized Er and Yb doped SrGd2O4 nanophosphorus. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia. 2023;.
https://hdl.handle.net/21.15107/rcub_dais_14662 .

Stamenković, Tijana, Ranđelović, Marjan, Čebela, Maria, Vuković, Marina, Dinić, Ivana, Mančić, Lidija, Lojpur, Vesna, "Characterization and photocatalytic activity of newly synthesized Er and Yb doped SrGd2O4 nanophosphorus" in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia (2023),
https://hdl.handle.net/21.15107/rcub_dais_14662 .

TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Ž.
AU  - Rakočević, Lazar
AU  - Pavlović, Vera P.
AU  - Ammar-Merah, Souad
AU  - Vujančević, Jelena
AU  - Nikolić, Maria Vesna
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16331
AB  - Mixed spinel ferrites MgxNi1-xFe2O4 were synthesized via sol-gel combustion synthesis with citric acid as fuel, followed by calcination at 700 °C for 3 hours. Obtained powders were characterized via X-ray diffraction analysis (XRD), X-ray photoelectron (XPS), FTIR and Raman spectroscopy and FESEM microscopy. Elemental composition was examined via energy dispersive spectroscopy (EDS). Humidity sensing properties were tested by measuring AC impedance in a climactic chamber at 25 °C and in the relative humidity range of 40–90%. Temperature sensing properties were tested by measuring DC resistance at 40% RH in the temperature range 40–90 °C. Synthesized powders were proven to be pure spinel Fd 3m phase with spherical, slightly agglomerated particles. Substitution of Mg with Ni results in structural changes such as a change in inversion parameter and particle agglomeration, which influences sensing properties of the material. Results show that the sensing properties of magnesium ferrite, which is already a well-established NTC sensor, can be improved by incorporating 10% of nickel in the spinel lattice structure. Mg0.9Ni0.1Fe2O4 exhibited higher temperature sensitivity and higher sensitivity towards humidity compared to MgFe2O4, while further substitution of Mg with Ni resulted in the decline of sensing properties, increase in particle size and agglomeration degree.
PB  - University of Novi Sad, Faculty of Technology, Novi Sad, Serbia
C3  - CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia
T1  - Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7269
ER  - 

@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Ž. and Rakočević, Lazar and Pavlović, Vera P. and Ammar-Merah, Souad and Vujančević, Jelena and Nikolić, Maria Vesna",
year = "2023",
abstract = "Mixed spinel ferrites MgxNi1-xFe2O4 were synthesized via sol-gel combustion synthesis with citric acid as fuel, followed by calcination at 700 °C for 3 hours. Obtained powders were characterized via X-ray diffraction analysis (XRD), X-ray photoelectron (XPS), FTIR and Raman spectroscopy and FESEM microscopy. Elemental composition was examined via energy dispersive spectroscopy (EDS). Humidity sensing properties were tested by measuring AC impedance in a climactic chamber at 25 °C and in the relative humidity range of 40–90%. Temperature sensing properties were tested by measuring DC resistance at 40% RH in the temperature range 40–90 °C. Synthesized powders were proven to be pure spinel Fd 3m phase with spherical, slightly agglomerated particles. Substitution of Mg with Ni results in structural changes such as a change in inversion parameter and particle agglomeration, which influences sensing properties of the material. Results show that the sensing properties of magnesium ferrite, which is already a well-established NTC sensor, can be improved by incorporating 10% of nickel in the spinel lattice structure. Mg0.9Ni0.1Fe2O4 exhibited higher temperature sensitivity and higher sensitivity towards humidity compared to MgFe2O4, while further substitution of Mg with Ni resulted in the decline of sensing properties, increase in particle size and agglomeration degree.",
publisher = "University of Novi Sad, Faculty of Technology, Novi Sad, Serbia",
journal = "CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia",
title = "Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7269"
}

Dojčinović, M., Vasiljević, Z. Ž., Rakočević, L., Pavlović, V. P., Ammar-Merah, S., Vujančević, J.,& Nikolić, M. V.. (2023). Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4. in CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia
University of Novi Sad, Faculty of Technology, Novi Sad, Serbia..
https://hdl.handle.net/21.15107/rcub_machinery_7269

Dojčinović M, Vasiljević ZŽ, Rakočević L, Pavlović VP, Ammar-Merah S, Vujančević J, Nikolić MV. Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4. in CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia. 2023;.
https://hdl.handle.net/21.15107/rcub_machinery_7269 .

Dojčinović, Milena, Vasiljević, Zorka Ž., Rakočević, Lazar, Pavlović, Vera P., Ammar-Merah, Souad, Vujančević, Jelena, Nikolić, Maria Vesna, "Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4" in CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7269 .

TY  - JOUR
AU  - Mitrašinović, Aleksandar M.
AU  - Radosavljević, Milinko
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/13440
AB  - Photovoltaic silicon converts sunlight in 95% of the operational commercial solar cells and has the potential to become a leading material in harvesting energy from renewable sources, but silicon can hardly convert clean energy due to technologies required for its reduction from sand and further purification. The implementation of the novel materials into photovoltaic systems depends on their conversion efficiency limited by the material's inherent properties, longevity dependent on internal stability, and ease of manufacturing process. A major challenge is discovering a multilayered set of different photovoltaic materials capable of converting clean energy from a wider spectra range since emerging materials and technologies such as dye-sensitized and quantum dots suffer from low conversion efficiencies while perovskite and organic cells have short longevity in atmospheric conditions. Presently, improving technologies for commercialized materials and creating multijunction solar cells enhanced by new photovoltaic materials is a path toward cleaner energies. With the rapid development of the integrative technologies and challenges that photovoltaics for clean energy conversion are facing, the entire clean photovoltaic industry could arise by bottom-up course as a part of integrative technologies rather than erecting large power plants.
PB  - Wiley
T2  - Global Challenges
T1  - Photovoltaic Materials and Their Path toward Cleaner Energy
SP  - 2200146
VL  - 7
IS  - 2
DO  - 10.1002/gch2.202200146
UR  - https://hdl.handle.net/21.15107/rcub_dais_13440
ER  - 

@article{
author = "Mitrašinović, Aleksandar M. and Radosavljević, Milinko",
year = "2023",
abstract = "Photovoltaic silicon converts sunlight in 95% of the operational commercial solar cells and has the potential to become a leading material in harvesting energy from renewable sources, but silicon can hardly convert clean energy due to technologies required for its reduction from sand and further purification. The implementation of the novel materials into photovoltaic systems depends on their conversion efficiency limited by the material's inherent properties, longevity dependent on internal stability, and ease of manufacturing process. A major challenge is discovering a multilayered set of different photovoltaic materials capable of converting clean energy from a wider spectra range since emerging materials and technologies such as dye-sensitized and quantum dots suffer from low conversion efficiencies while perovskite and organic cells have short longevity in atmospheric conditions. Presently, improving technologies for commercialized materials and creating multijunction solar cells enhanced by new photovoltaic materials is a path toward cleaner energies. With the rapid development of the integrative technologies and challenges that photovoltaics for clean energy conversion are facing, the entire clean photovoltaic industry could arise by bottom-up course as a part of integrative technologies rather than erecting large power plants.",
publisher = "Wiley",
journal = "Global Challenges",
title = "Photovoltaic Materials and Their Path toward Cleaner Energy",
pages = "2200146",
volume = "7",
number = "2",
doi = "10.1002/gch2.202200146",
url = "https://hdl.handle.net/21.15107/rcub_dais_13440"
}

Mitrašinović, A. M.,& Radosavljević, M.. (2023). Photovoltaic Materials and Their Path toward Cleaner Energy. in Global Challenges
Wiley., 7(2), 2200146.
https://doi.org/10.1002/gch2.202200146
https://hdl.handle.net/21.15107/rcub_dais_13440

Mitrašinović AM, Radosavljević M. Photovoltaic Materials and Their Path toward Cleaner Energy. in Global Challenges. 2023;7(2):2200146.
doi:10.1002/gch2.202200146
https://hdl.handle.net/21.15107/rcub_dais_13440 .

Mitrašinović, Aleksandar M., Radosavljević, Milinko, "Photovoltaic Materials and Their Path toward Cleaner Energy" in Global Challenges, 7, no. 2 (2023):2200146,
https://doi.org/10.1002/gch2.202200146 .,
https://hdl.handle.net/21.15107/rcub_dais_13440 .

TY  - CONF
AU  - Tomić, Nina
AU  - Stevanović, Magdalena
AU  - Filipović, Nenad
AU  - Mitić Ćulafić, Dragana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16245
AB  - Kontinuirano interesovanje za nanočestice različitih materijala i njihove kompozite stvorilo je brojna pitanja u vezi njihove potencijalne toksičnosti. Polifenol resveratrol i jedinjenja sa selenom su među agensima čijoj je upotrebi nanotehnologija omogućila nov pristup. U formi nanočestica, oni pokazuju poboljšanu biokompatibilnost i biološke efekte, kao što je antimikrobna aktivnost. Na osnovu podataka iz literature, nanočestice selena su najčešće manje toksične nego jedinjenja sa selenom. U našem istraživanju, najpre smo pripremili kompozitni materijal na bazi selena i resveratrola. Nakon toga, kompozit i njegove komponente bili su testirani pomoću MTT tetrazolijumske boje za utvrđivanje citotoksičnosti, komet testom na genotoksičnost i nitroplavo-tetrazolijumskim testom za procenu nivoa superoksidnih anjona. U svim eksperimentima je korišćena zdrava ćelijska linija fibroblasta čoveka (MRC-5). Rezultati su pokazali da, iako čestice resveratrola ispoljavaju citotoksičnost u koncentracijama preko 12 μg/ml, one nisu genotoksične i ne indukuju stvaranje superoksidnih anjona. Sa druge strane, nanočestice selena nisu bile citotoksične ispod 150 μg/ml, ali su njima tretirane ćelije pokazale znake oštećenja DNK i povećanje produkcije superoksidnih anjona, čak i na 18 μg/ml. Kompozit je pokazao drugačije efekte, indukujući višu citotoksičnost i oksidativni stres nego ekvivalentne koncentracije komponenti, ali istovremeno nije bio genotoksičan. Moguće je da su interakcije nanočestica selena sa nanočesticama resveratrola dovele do pojave jedinstvenih osobina kompozita, potvrđujući izuzetnu važnost testiranja nanokompozitnih materijala uporedo sa njihovim komponentama.
AB  - The continuous interest in engineered nanoparticles of various materials, and their composites, has raised numerous questions regarding their toxicological profiles. Polyphenol resveratrol and selenium compounds are among the agents to which nanotechnology has given all new approach. Their particulate forms possess improved bioavailability and biological effects, such as antibacterial activity. Furthermore, selenium nanoparticles usually have significantly lower toxicity compared to selenium compounds. In this study, we prepared composite material consisting of selenium and resveratrol nanoparticles. Then, composite material and its components were assessed by using tetrazolium MTT dye for determining cytotoxicity, comet assay for genotoxicity study, and nitroblue tetrazolium assay (NBT) assay to estimate levels of superoxide anions. The normal human fibroblast cells (MRC-5) were used in all the experiments. Results showed that, although the resveratrol component exhibited cytotoxicity at 12 μg/ml, it was not genotoxic, and did not induce superoxide anion production. Selenium nanoparticles, on the other hand, were not cytotoxic below 150 μg/ml, but treated cells showed signs of DNA damage and elevation in superoxide anion production even at 18 μg/ml. Composite material behaved differently, inducing higher cytotoxicity and oxidative stress than comparable concentrations of components, but also showed lack of genotoxicity. Possible interactions of selenium nanoparticles with resveratrol nanoparticles could have created unique composite properties, confirming the great importance of toxicity testing of nanocomposite materials along with their components.
PB  - Beograd : Udruženje toksikologa Srbije
C3  - 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book
T1  - Citotoksični i genotoksični potencijal kompozita na bazi nanočestica resveratrola i selena, i njegova sposobnost indukcije superoksidnih anjona
T1  - Cytotoxic and genotoxic potential of composite based on resveratrol and selenium nanoparticles, and its potential for superoxide anion induction
SP  - 193
EP  - 194
UR  - https://hdl.handle.net/21.15107/rcub_dais_16245
ER  - 

@conference{
author = "Tomić, Nina and Stevanović, Magdalena and Filipović, Nenad and Mitić Ćulafić, Dragana",
year = "2023",
abstract = "Kontinuirano interesovanje za nanočestice različitih materijala i njihove kompozite stvorilo je brojna pitanja u vezi njihove potencijalne toksičnosti. Polifenol resveratrol i jedinjenja sa selenom su među agensima čijoj je upotrebi nanotehnologija omogućila nov pristup. U formi nanočestica, oni pokazuju poboljšanu biokompatibilnost i biološke efekte, kao što je antimikrobna aktivnost. Na osnovu podataka iz literature, nanočestice selena su najčešće manje toksične nego jedinjenja sa selenom. U našem istraživanju, najpre smo pripremili kompozitni materijal na bazi selena i resveratrola. Nakon toga, kompozit i njegove komponente bili su testirani pomoću MTT tetrazolijumske boje za utvrđivanje citotoksičnosti, komet testom na genotoksičnost i nitroplavo-tetrazolijumskim testom za procenu nivoa superoksidnih anjona. U svim eksperimentima je korišćena zdrava ćelijska linija fibroblasta čoveka (MRC-5). Rezultati su pokazali da, iako čestice resveratrola ispoljavaju citotoksičnost u koncentracijama preko 12 μg/ml, one nisu genotoksične i ne indukuju stvaranje superoksidnih anjona. Sa druge strane, nanočestice selena nisu bile citotoksične ispod 150 μg/ml, ali su njima tretirane ćelije pokazale znake oštećenja DNK i povećanje produkcije superoksidnih anjona, čak i na 18 μg/ml. Kompozit je pokazao drugačije efekte, indukujući višu citotoksičnost i oksidativni stres nego ekvivalentne koncentracije komponenti, ali istovremeno nije bio genotoksičan. Moguće je da su interakcije nanočestica selena sa nanočesticama resveratrola dovele do pojave jedinstvenih osobina kompozita, potvrđujući izuzetnu važnost testiranja nanokompozitnih materijala uporedo sa njihovim komponentama., The continuous interest in engineered nanoparticles of various materials, and their composites, has raised numerous questions regarding their toxicological profiles. Polyphenol resveratrol and selenium compounds are among the agents to which nanotechnology has given all new approach. Their particulate forms possess improved bioavailability and biological effects, such as antibacterial activity. Furthermore, selenium nanoparticles usually have significantly lower toxicity compared to selenium compounds. In this study, we prepared composite material consisting of selenium and resveratrol nanoparticles. Then, composite material and its components were assessed by using tetrazolium MTT dye for determining cytotoxicity, comet assay for genotoxicity study, and nitroblue tetrazolium assay (NBT) assay to estimate levels of superoxide anions. The normal human fibroblast cells (MRC-5) were used in all the experiments. Results showed that, although the resveratrol component exhibited cytotoxicity at 12 μg/ml, it was not genotoxic, and did not induce superoxide anion production. Selenium nanoparticles, on the other hand, were not cytotoxic below 150 μg/ml, but treated cells showed signs of DNA damage and elevation in superoxide anion production even at 18 μg/ml. Composite material behaved differently, inducing higher cytotoxicity and oxidative stress than comparable concentrations of components, but also showed lack of genotoxicity. Possible interactions of selenium nanoparticles with resveratrol nanoparticles could have created unique composite properties, confirming the great importance of toxicity testing of nanocomposite materials along with their components.",
publisher = "Beograd : Udruženje toksikologa Srbije",
journal = "13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book",
title = "Citotoksični i genotoksični potencijal kompozita na bazi nanočestica resveratrola i selena, i njegova sposobnost indukcije superoksidnih anjona, Cytotoxic and genotoxic potential of composite based on resveratrol and selenium nanoparticles, and its potential for superoxide anion induction",
pages = "193-194",
url = "https://hdl.handle.net/21.15107/rcub_dais_16245"
}

Tomić, N., Stevanović, M., Filipović, N.,& Mitić Ćulafić, D.. (2023). Citotoksični i genotoksični potencijal kompozita na bazi nanočestica resveratrola i selena, i njegova sposobnost indukcije superoksidnih anjona. in 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book
Beograd : Udruženje toksikologa Srbije., 193-194.
https://hdl.handle.net/21.15107/rcub_dais_16245

Tomić N, Stevanović M, Filipović N, Mitić Ćulafić D. Citotoksični i genotoksični potencijal kompozita na bazi nanočestica resveratrola i selena, i njegova sposobnost indukcije superoksidnih anjona. in 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book. 2023;:193-194.
https://hdl.handle.net/21.15107/rcub_dais_16245 .

Tomić, Nina, Stevanović, Magdalena, Filipović, Nenad, Mitić Ćulafić, Dragana, "Citotoksični i genotoksični potencijal kompozita na bazi nanočestica resveratrola i selena, i njegova sposobnost indukcije superoksidnih anjona" in 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book (2023):193-194,
https://hdl.handle.net/21.15107/rcub_dais_16245 .

TY  - CONF
AU  - Ganić, Tea
AU  - Cvetković, Stefana
AU  - Vuletić, Stefana
AU  - Stević, Tatjana
AU  - Stevanović, Magdalena
AU  - Tomić, Nina
AU  - Nikolić, Biljana
AU  - Mitić Ćulafić, Dragana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16246
AB  - Cimet je jedna od najpoznatijih aromatičnih biljaka, koje je najčešće korišćena kao začin. Prepoznat je kao potencijalni terapeutik u narodnoj medicini, zbog čega se dugo koristi za lečenje različitih infekcija. Etarska ulja su sekundarni metaboliti koje sintetišu aromatične biljke. Za etarsko ulje cimeta (CEO) su definisane različite biološke aktivnosti, međutim fizičkohemijske karakteristike ulja su slaba rastvorljivost u vodi i laka isparljivost, što ograničava njihovu primenu. Iz tog razloga, formulacija emulzija etarskih ulja predstavlja dobro rešenje za prevazilaženje problema njihove primene. Iako se CEO smatra bezbednim za upotrebu, rezultati istraživanja variraju, ukazujući na neophodnost daljih toksikoloških istraživanja. Cilj ovog rada je bila komparativna analiza biološke aktivnosti i in vitro toksičnosti CEO i njegove emulzije (EM). Antioksidativni potencijal je ispitivan DPPH testom. MTT test je primenjen u cilju procene citotoksičnog efekta CEO i EM na fibroblastima pluća fetusa (MRC–5). Na istoj ćelijskoj liniji, ispitivan je nivo oštećenja molekula DNK, primenom alkalnog komet testa. Na osnovu rezltata DPPH testa, IC50 vrednost za CEO je bila 320 μg/mL, dok je za EM bila 54 μg/mL. Na ćelijskoj liniji MRC–5, IC50 vrednosti dobijene MTT testom su iznosile 0,13 mg/mL za CEO i 0,025 mg/mL za EM. CEO i EM nisu pokazali genotoksični potencijal. Uzimajući sve prethodno navedeno u obzir, CEO i EM, kao jaki antioksidanti koji pokazuju odsustvo genotoksičnosti i slabu citotoksičnost.
AB  - Cinnamon is among most popular aromatic plants, generally used as a spice. Over the centuries it was recognized as a potential therapeutic for different kind of infections. Essential oils are aromatic plants’ secondary metabolites. Cinnamon essential oil (CEO) possess many favorable biological activities, but its physicochemical properties, as an oil, are poor solubility in water and high volatility, which limits its application. For that reason, preparation of essential oils’ emulsions seems to be solution to overcome applicability problems. Even though CEO is one of the oils recognized as safe to be used, the results from different studies vary, indicating necessity to further study its toxicological properties. The aim of this study was to comparatively analyze CEO and its emulsion (EM) biological activity and in vitro toxicity. Antioxidative potential was investigated using DPPH assay. The MTT assay was applied for the estimation of cytotoxic effects of CEO and EM on fetal fibroblasts (MRC-5) cell line. On the same cell line, level of DNA damage was evaluated, using alkaline comet assay. According to the DPPH assay results, IC50 value for CEO was 320 μg/mL, for EM was 54 μg/mL. On MRC-5 cell line, IC50 values were 0.13 mg/mL for CEO and 0.025 mg/mL for EM. Both CEO and EM didn’t exhibit potential to induce DNA damage. Taking all above mention into account, as strong antioxidants without genotoxicity and with weak cytotoxicity, CEO and EM could be considered as good candidates for further investigation of biological activities and potential for human use.
PB  - Beograd : Udruženje toksikologa Srbije
C3  - 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book
T1  - Procena antioksidativnog, citotoksičnog i genotoksičnog efekta etarskog ulja cimeta i njegove emulzije
T1  - Evaluation of antioxidative, cytotoxic and genotoxic effect of cinnamon essential oil and its emulsion
SP  - 152
EP  - 153
UR  - https://hdl.handle.net/21.15107/rcub_dais_16246
ER  - 

@conference{
author = "Ganić, Tea and Cvetković, Stefana and Vuletić, Stefana and Stević, Tatjana and Stevanović, Magdalena and Tomić, Nina and Nikolić, Biljana and Mitić Ćulafić, Dragana",
year = "2023",
abstract = "Cimet je jedna od najpoznatijih aromatičnih biljaka, koje je najčešće korišćena kao začin. Prepoznat je kao potencijalni terapeutik u narodnoj medicini, zbog čega se dugo koristi za lečenje različitih infekcija. Etarska ulja su sekundarni metaboliti koje sintetišu aromatične biljke. Za etarsko ulje cimeta (CEO) su definisane različite biološke aktivnosti, međutim fizičkohemijske karakteristike ulja su slaba rastvorljivost u vodi i laka isparljivost, što ograničava njihovu primenu. Iz tog razloga, formulacija emulzija etarskih ulja predstavlja dobro rešenje za prevazilaženje problema njihove primene. Iako se CEO smatra bezbednim za upotrebu, rezultati istraživanja variraju, ukazujući na neophodnost daljih toksikoloških istraživanja. Cilj ovog rada je bila komparativna analiza biološke aktivnosti i in vitro toksičnosti CEO i njegove emulzije (EM). Antioksidativni potencijal je ispitivan DPPH testom. MTT test je primenjen u cilju procene citotoksičnog efekta CEO i EM na fibroblastima pluća fetusa (MRC–5). Na istoj ćelijskoj liniji, ispitivan je nivo oštećenja molekula DNK, primenom alkalnog komet testa. Na osnovu rezltata DPPH testa, IC50 vrednost za CEO je bila 320 μg/mL, dok je za EM bila 54 μg/mL. Na ćelijskoj liniji MRC–5, IC50 vrednosti dobijene MTT testom su iznosile 0,13 mg/mL za CEO i 0,025 mg/mL za EM. CEO i EM nisu pokazali genotoksični potencijal. Uzimajući sve prethodno navedeno u obzir, CEO i EM, kao jaki antioksidanti koji pokazuju odsustvo genotoksičnosti i slabu citotoksičnost., Cinnamon is among most popular aromatic plants, generally used as a spice. Over the centuries it was recognized as a potential therapeutic for different kind of infections. Essential oils are aromatic plants’ secondary metabolites. Cinnamon essential oil (CEO) possess many favorable biological activities, but its physicochemical properties, as an oil, are poor solubility in water and high volatility, which limits its application. For that reason, preparation of essential oils’ emulsions seems to be solution to overcome applicability problems. Even though CEO is one of the oils recognized as safe to be used, the results from different studies vary, indicating necessity to further study its toxicological properties. The aim of this study was to comparatively analyze CEO and its emulsion (EM) biological activity and in vitro toxicity. Antioxidative potential was investigated using DPPH assay. The MTT assay was applied for the estimation of cytotoxic effects of CEO and EM on fetal fibroblasts (MRC-5) cell line. On the same cell line, level of DNA damage was evaluated, using alkaline comet assay. According to the DPPH assay results, IC50 value for CEO was 320 μg/mL, for EM was 54 μg/mL. On MRC-5 cell line, IC50 values were 0.13 mg/mL for CEO and 0.025 mg/mL for EM. Both CEO and EM didn’t exhibit potential to induce DNA damage. Taking all above mention into account, as strong antioxidants without genotoxicity and with weak cytotoxicity, CEO and EM could be considered as good candidates for further investigation of biological activities and potential for human use.",
publisher = "Beograd : Udruženje toksikologa Srbije",
journal = "13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book",
title = "Procena antioksidativnog, citotoksičnog i genotoksičnog efekta etarskog ulja cimeta i njegove emulzije, Evaluation of antioxidative, cytotoxic and genotoxic effect of cinnamon essential oil and its emulsion",
pages = "152-153",
url = "https://hdl.handle.net/21.15107/rcub_dais_16246"
}

Ganić, T., Cvetković, S., Vuletić, S., Stević, T., Stevanović, M., Tomić, N., Nikolić, B.,& Mitić Ćulafić, D.. (2023). Procena antioksidativnog, citotoksičnog i genotoksičnog efekta etarskog ulja cimeta i njegove emulzije. in 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book
Beograd : Udruženje toksikologa Srbije., 152-153.
https://hdl.handle.net/21.15107/rcub_dais_16246

Ganić T, Cvetković S, Vuletić S, Stević T, Stevanović M, Tomić N, Nikolić B, Mitić Ćulafić D. Procena antioksidativnog, citotoksičnog i genotoksičnog efekta etarskog ulja cimeta i njegove emulzije. in 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book. 2023;:152-153.
https://hdl.handle.net/21.15107/rcub_dais_16246 .

Ganić, Tea, Cvetković, Stefana, Vuletić, Stefana, Stević, Tatjana, Stevanović, Magdalena, Tomić, Nina, Nikolić, Biljana, Mitić Ćulafić, Dragana, "Procena antioksidativnog, citotoksičnog i genotoksičnog efekta etarskog ulja cimeta i njegove emulzije" in 13th international congress of the Serbian society of toxicology & 1st toxSEE regional conference : Present and future of toxicology: challenges and opportunities : 10-12 May 2023 Belgrade : abstract book (2023):152-153,
https://hdl.handle.net/21.15107/rcub_dais_16246 .

TY  - JOUR
AU  - Popović, Aleksandra S.
AU  - Gvozdenović, Milica M.
AU  - Janković, Ana
AU  - Jugović, Branimir
AU  - Grgur, Branimir
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14707
AB  - Electrochemical Energy Storage (EES) technologies are playing a significant role in the aspirations to decrease the usage of fossil fuels and move toward an environmentally conscious society. Due to the importance of EES technologies, more researchers are looking for an efficient and effective electrode material, which is the most important part of the EES system that possibly could result in much-needed advancements in the field. However, incoming researchers have a diverse backgrounds and as newcomers to the electrochemical community, they sometimes lack familiarity with the core concepts, well-established procedures, and methodologies that define the standards of the discipline. This issue's importance has been acknowledged, and various publications have been written to guide researchers in doing accurate evaluations. However, to the best of our knowledge, even though these publications demonstrate the methodologies and procedures for approaching the existing challenges none of them address the offered topic with an actual example. To address this gap, we present a step-by-step procedure for the electrochemical analysis of polypyrrole, a widely utilized conducting polymer with significant potential as an electrode material for supercapacitors and batteries.
PB  - Elsevier BV
T2  - Synthetic Metals
T1  - Polypyrrole on graphite: An exemplary model system for comprehensive electrochemical analysis of energy storage materials
SP  - 117386
VL  - 297
DO  - 10.1016/j.synthmet.2023.117386
UR  - https://hdl.handle.net/21.15107/rcub_dais_14707
ER  - 

@article{
author = "Popović, Aleksandra S. and Gvozdenović, Milica M. and Janković, Ana and Jugović, Branimir and Grgur, Branimir",
year = "2023",
abstract = "Electrochemical Energy Storage (EES) technologies are playing a significant role in the aspirations to decrease the usage of fossil fuels and move toward an environmentally conscious society. Due to the importance of EES technologies, more researchers are looking for an efficient and effective electrode material, which is the most important part of the EES system that possibly could result in much-needed advancements in the field. However, incoming researchers have a diverse backgrounds and as newcomers to the electrochemical community, they sometimes lack familiarity with the core concepts, well-established procedures, and methodologies that define the standards of the discipline. This issue's importance has been acknowledged, and various publications have been written to guide researchers in doing accurate evaluations. However, to the best of our knowledge, even though these publications demonstrate the methodologies and procedures for approaching the existing challenges none of them address the offered topic with an actual example. To address this gap, we present a step-by-step procedure for the electrochemical analysis of polypyrrole, a widely utilized conducting polymer with significant potential as an electrode material for supercapacitors and batteries.",
publisher = "Elsevier BV",
journal = "Synthetic Metals",
title = "Polypyrrole on graphite: An exemplary model system for comprehensive electrochemical analysis of energy storage materials",
pages = "117386",
volume = "297",
doi = "10.1016/j.synthmet.2023.117386",
url = "https://hdl.handle.net/21.15107/rcub_dais_14707"
}

Popović, A. S., Gvozdenović, M. M., Janković, A., Jugović, B.,& Grgur, B.. (2023). Polypyrrole on graphite: An exemplary model system for comprehensive electrochemical analysis of energy storage materials. in Synthetic Metals
Elsevier BV., 297, 117386.
https://doi.org/10.1016/j.synthmet.2023.117386
https://hdl.handle.net/21.15107/rcub_dais_14707

Popović AS, Gvozdenović MM, Janković A, Jugović B, Grgur B. Polypyrrole on graphite: An exemplary model system for comprehensive electrochemical analysis of energy storage materials. in Synthetic Metals. 2023;297:117386.
doi:10.1016/j.synthmet.2023.117386
https://hdl.handle.net/21.15107/rcub_dais_14707 .

Popović, Aleksandra S., Gvozdenović, Milica M., Janković, Ana, Jugović, Branimir, Grgur, Branimir, "Polypyrrole on graphite: An exemplary model system for comprehensive electrochemical analysis of energy storage materials" in Synthetic Metals, 297 (2023):117386,
https://doi.org/10.1016/j.synthmet.2023.117386 .,
https://hdl.handle.net/21.15107/rcub_dais_14707 .

TY  - JOUR
AU  - Stojanović, Srna
AU  - Rac, Vladislav
AU  - Mojsilović, Kristina
AU  - Vasilić, Rastko
AU  - Marković, Smilja
AU  - Damjanović Vasilić, Ljiljana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/15132
AB  - Photocatalytic degradation of bisphenol A (BPA) was investigated using commercial TiO2 P25 nanoparticles supported on natural zeolite clinoptilolite (Cli). Employing ultrasound assisted solid-state dispersion method hybrid photocatalyst containing 20 wt% of TiO2, marked TCli-20, was prepared. The structural, morphological and surface properties, and particle size distribution of TCli-20 were studied by X-ray powder diffraction, Fourier transform infrared spectroscopy, ultraviolet–visible diffuse reflectance spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, atomic force microscopy, Brunner-Emmet-Teller method and laser diffraction. The results revealed a successful loading of TiO2 P25 nanoparticles on Cli surface and the preservation of both zeolitic structure and optical properties of TiO2. The influence of catalyst dose, pH value and the addition of hydrogen peroxide (H2O2) was evaluated. The optimal reaction conditions were 2 g/L of catalyst at near-neutral conditions (pH = 6.4) for complete BPA (5 mg/L) photodegradation after 180 min of exposure to simulated solar light. The addition of H2O2 was beneficial for the degradation process and led to the removal of BPA after 120 min of irradiation. BPA removal (60% for 180 min of irradiation) was reduced when TCli-20 was tested in bottled drinking water due to the presence of bicarbonate ions which acted as scavengers for hydroxyl radicals. Even though the photocatalytic activity of TCli-20 decreased after several cycles of usage, 70% of BPA was still successfully degraded during the fourth cycle. The reusability study showed easy separation, stability and good photocatalytic ability of investigated cost-effective hybrid photocatalyst. © 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
T2  - Environmental Science and Pollution Research
T1  - Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst
SP  - 84046
EP  - 84060
VL  - 30
DO  - 10.1007/s11356-023-28397-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_15132
ER  - 

@article{
author = "Stojanović, Srna and Rac, Vladislav and Mojsilović, Kristina and Vasilić, Rastko and Marković, Smilja and Damjanović Vasilić, Ljiljana",
year = "2023",
abstract = "Photocatalytic degradation of bisphenol A (BPA) was investigated using commercial TiO2 P25 nanoparticles supported on natural zeolite clinoptilolite (Cli). Employing ultrasound assisted solid-state dispersion method hybrid photocatalyst containing 20 wt% of TiO2, marked TCli-20, was prepared. The structural, morphological and surface properties, and particle size distribution of TCli-20 were studied by X-ray powder diffraction, Fourier transform infrared spectroscopy, ultraviolet–visible diffuse reflectance spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, atomic force microscopy, Brunner-Emmet-Teller method and laser diffraction. The results revealed a successful loading of TiO2 P25 nanoparticles on Cli surface and the preservation of both zeolitic structure and optical properties of TiO2. The influence of catalyst dose, pH value and the addition of hydrogen peroxide (H2O2) was evaluated. The optimal reaction conditions were 2 g/L of catalyst at near-neutral conditions (pH = 6.4) for complete BPA (5 mg/L) photodegradation after 180 min of exposure to simulated solar light. The addition of H2O2 was beneficial for the degradation process and led to the removal of BPA after 120 min of irradiation. BPA removal (60% for 180 min of irradiation) was reduced when TCli-20 was tested in bottled drinking water due to the presence of bicarbonate ions which acted as scavengers for hydroxyl radicals. Even though the photocatalytic activity of TCli-20 decreased after several cycles of usage, 70% of BPA was still successfully degraded during the fourth cycle. The reusability study showed easy separation, stability and good photocatalytic ability of investigated cost-effective hybrid photocatalyst. © 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.",
journal = "Environmental Science and Pollution Research",
title = "Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst",
pages = "84046-84060",
volume = "30",
doi = "10.1007/s11356-023-28397-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_15132"
}

Stojanović, S., Rac, V., Mojsilović, K., Vasilić, R., Marković, S.,& Damjanović Vasilić, L.. (2023). Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst. in Environmental Science and Pollution Research, 30, 84046-84060.
https://doi.org/10.1007/s11356-023-28397-w
https://hdl.handle.net/21.15107/rcub_dais_15132

Stojanović S, Rac V, Mojsilović K, Vasilić R, Marković S, Damjanović Vasilić L. Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst. in Environmental Science and Pollution Research. 2023;30:84046-84060.
doi:10.1007/s11356-023-28397-w
https://hdl.handle.net/21.15107/rcub_dais_15132 .

Stojanović, Srna, Rac, Vladislav, Mojsilović, Kristina, Vasilić, Rastko, Marković, Smilja, Damjanović Vasilić, Ljiljana, "Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst" in Environmental Science and Pollution Research, 30 (2023):84046-84060,
https://doi.org/10.1007/s11356-023-28397-w .,
https://hdl.handle.net/21.15107/rcub_dais_15132 .

TY  - JOUR
AU  - Peleš Tadić, Adriana
AU  - Blagojević, Vladimir A.
AU  - Stojanović, Dušica
AU  - Ostojić, Sanja B.
AU  - Tasić, Nikola
AU  - Kosanović, Darko
AU  - Uskoković, Petar
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/13436
AB  - Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) investigated the effect of ZnO nanoparticles on the crystallinity of the polymer, under controlled heating and cooling. Atomic force (AFM) microscopy was used to record the surfaces of the samples. Nanocomposite surface roughness shows the presence of the different phases inside of the matrix, where rough samples contain a higher proportion of the β phase. PFM was performed to investigate the piezoresponse of the composites. Nanoidentation showed that the mechanical activation of the filler (ZnO) increases the Young modulus with the activation time. Molecular simulations in periodic systems (PVDF–ZnO spherical nanocluster and nanocylinder composite) were used to investigate the influence of particle size and shape on the Young modulus of different phases of PVDF.
PB  - Elsevier BV
T2  - Materials Science and Engineering: B
T1  - Nanomechanical properties of PVDF–ZnO polymer nanocomposite
SP  - 116126
VL  - 287
DO  - 10.1016/j.mseb.2022.116126
UR  - https://hdl.handle.net/21.15107/rcub_dais_13436
ER  - 

@article{
author = "Peleš Tadić, Adriana and Blagojević, Vladimir A. and Stojanović, Dušica and Ostojić, Sanja B. and Tasić, Nikola and Kosanović, Darko and Uskoković, Petar and Pavlović, Vladimir B.",
year = "2023",
abstract = "Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) investigated the effect of ZnO nanoparticles on the crystallinity of the polymer, under controlled heating and cooling. Atomic force (AFM) microscopy was used to record the surfaces of the samples. Nanocomposite surface roughness shows the presence of the different phases inside of the matrix, where rough samples contain a higher proportion of the β phase. PFM was performed to investigate the piezoresponse of the composites. Nanoidentation showed that the mechanical activation of the filler (ZnO) increases the Young modulus with the activation time. Molecular simulations in periodic systems (PVDF–ZnO spherical nanocluster and nanocylinder composite) were used to investigate the influence of particle size and shape on the Young modulus of different phases of PVDF.",
publisher = "Elsevier BV",
journal = "Materials Science and Engineering: B",
title = "Nanomechanical properties of PVDF–ZnO polymer nanocomposite",
pages = "116126",
volume = "287",
doi = "10.1016/j.mseb.2022.116126",
url = "https://hdl.handle.net/21.15107/rcub_dais_13436"
}

Peleš Tadić, A., Blagojević, V. A., Stojanović, D., Ostojić, S. B., Tasić, N., Kosanović, D., Uskoković, P.,& Pavlović, V. B.. (2023). Nanomechanical properties of PVDF–ZnO polymer nanocomposite. in Materials Science and Engineering: B
Elsevier BV., 287, 116126.
https://doi.org/10.1016/j.mseb.2022.116126
https://hdl.handle.net/21.15107/rcub_dais_13436

Peleš Tadić A, Blagojević VA, Stojanović D, Ostojić SB, Tasić N, Kosanović D, Uskoković P, Pavlović VB. Nanomechanical properties of PVDF–ZnO polymer nanocomposite. in Materials Science and Engineering: B. 2023;287:116126.
doi:10.1016/j.mseb.2022.116126
https://hdl.handle.net/21.15107/rcub_dais_13436 .

Peleš Tadić, Adriana, Blagojević, Vladimir A., Stojanović, Dušica, Ostojić, Sanja B., Tasić, Nikola, Kosanović, Darko, Uskoković, Petar, Pavlović, Vladimir B., "Nanomechanical properties of PVDF–ZnO polymer nanocomposite" in Materials Science and Engineering: B, 287 (2023):116126,
https://doi.org/10.1016/j.mseb.2022.116126 .,
https://hdl.handle.net/21.15107/rcub_dais_13436 .

TY  - JOUR
AU  - Radonjić, Aleksandar
AU  - Vujičić, Vladimir
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14590
AB  - One of the most important characteristics of all error control codes (ECCs) is the complexity of the encoding/decoding algorithms. Today, there are many ECCs that can correct multiple bit errors, but at the price of high encoding/decoding complexity. Among the rare exceptions are integer ECCs (IECCs), whose serial encoding/decoding algorithms run in O(n) time, where n is the codeword length. In this article, we show that IECCs can be encoded/decoded even faster, that is, that their parallel encoding/decoding algorithms have O(log2n) time complexity.
PB  - Wiley
T2  - Engineering Reports
T1  - Logarithmic time encoding and decoding of integer error control codes
SP  - e12675
VL  - 5
IS  - 11
DO  - 10.1002/eng2.12675
UR  - https://hdl.handle.net/21.15107/rcub_dais_14590
ER  - 

@article{
author = "Radonjić, Aleksandar and Vujičić, Vladimir",
year = "2023",
abstract = "One of the most important characteristics of all error control codes (ECCs) is the complexity of the encoding/decoding algorithms. Today, there are many ECCs that can correct multiple bit errors, but at the price of high encoding/decoding complexity. Among the rare exceptions are integer ECCs (IECCs), whose serial encoding/decoding algorithms run in O(n) time, where n is the codeword length. In this article, we show that IECCs can be encoded/decoded even faster, that is, that their parallel encoding/decoding algorithms have O(log2n) time complexity.",
publisher = "Wiley",
journal = "Engineering Reports",
title = "Logarithmic time encoding and decoding of integer error control codes",
pages = "e12675",
volume = "5",
number = "11",
doi = "10.1002/eng2.12675",
url = "https://hdl.handle.net/21.15107/rcub_dais_14590"
}

Radonjić, A.,& Vujičić, V.. (2023). Logarithmic time encoding and decoding of integer error control codes. in Engineering Reports
Wiley., 5(11), e12675.
https://doi.org/10.1002/eng2.12675
https://hdl.handle.net/21.15107/rcub_dais_14590

Radonjić A, Vujičić V. Logarithmic time encoding and decoding of integer error control codes. in Engineering Reports. 2023;5(11):e12675.
doi:10.1002/eng2.12675
https://hdl.handle.net/21.15107/rcub_dais_14590 .

Radonjić, Aleksandar, Vujičić, Vladimir, "Logarithmic time encoding and decoding of integer error control codes" in Engineering Reports, 5, no. 11 (2023):e12675,
https://doi.org/10.1002/eng2.12675 .,
https://hdl.handle.net/21.15107/rcub_dais_14590 .

TY  - JOUR
AU  - Obradović, Nina
AU  - Feng, Lun
AU  - Filipović, Suzana
AU  - Mirković, Miljana
AU  - Kosanović, Darko
AU  - Rogan, Jelena
AU  - Fahrenholtz, William G.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14877
AB  - Zirconium carbide ceramics were prepared by carbothermal reduction of ZrO2 and C that were mixed by high-energy ball milling. Powders were milled for times from 0 to 120 min in air. As milling time increased, the surface area of the powders increased, indicating significant particle size reduction. Milled powders were reacted at 1600 °C and then densified by spark plasma sintering at 2000 °C, which was sufficient to convert the starting powders to zirconium carbide. Unmilled powders did not reach full density. Milled powders reached full density, but ZrO2 impurities were found for specimens prepared from powders milled for 60 and 120 min. Microstructure analysis showed that grain size was less than 2 µm for ceramics produced from powder milled for 15 min. Based on densification onset temperature and impurity levels, a milling time of 15 min gives the best balance of particle size reduction to promote densification while minimizing impurity levels.
PB  - Elsevier BV
T2  - Journal of the European Ceramic Society
T1  - Effect of mechanical activation on carbothermal synthesis and densification of ZrC
SP  - 7306
EP  - 7313
VL  - 43
DO  - 10.1016/j.jeurceramsoc.2023.08.007
UR  - https://hdl.handle.net/21.15107/rcub_dais_14877
ER  - 

@article{
author = "Obradović, Nina and Feng, Lun and Filipović, Suzana and Mirković, Miljana and Kosanović, Darko and Rogan, Jelena and Fahrenholtz, William G.",
year = "2023",
abstract = "Zirconium carbide ceramics were prepared by carbothermal reduction of ZrO2 and C that were mixed by high-energy ball milling. Powders were milled for times from 0 to 120 min in air. As milling time increased, the surface area of the powders increased, indicating significant particle size reduction. Milled powders were reacted at 1600 °C and then densified by spark plasma sintering at 2000 °C, which was sufficient to convert the starting powders to zirconium carbide. Unmilled powders did not reach full density. Milled powders reached full density, but ZrO2 impurities were found for specimens prepared from powders milled for 60 and 120 min. Microstructure analysis showed that grain size was less than 2 µm for ceramics produced from powder milled for 15 min. Based on densification onset temperature and impurity levels, a milling time of 15 min gives the best balance of particle size reduction to promote densification while minimizing impurity levels.",
publisher = "Elsevier BV",
journal = "Journal of the European Ceramic Society",
title = "Effect of mechanical activation on carbothermal synthesis and densification of ZrC",
pages = "7306-7313",
volume = "43",
doi = "10.1016/j.jeurceramsoc.2023.08.007",
url = "https://hdl.handle.net/21.15107/rcub_dais_14877"
}

Obradović, N., Feng, L., Filipović, S., Mirković, M., Kosanović, D., Rogan, J.,& Fahrenholtz, W. G.. (2023). Effect of mechanical activation on carbothermal synthesis and densification of ZrC. in Journal of the European Ceramic Society
Elsevier BV., 43, 7306-7313.
https://doi.org/10.1016/j.jeurceramsoc.2023.08.007
https://hdl.handle.net/21.15107/rcub_dais_14877

Obradović N, Feng L, Filipović S, Mirković M, Kosanović D, Rogan J, Fahrenholtz WG. Effect of mechanical activation on carbothermal synthesis and densification of ZrC. in Journal of the European Ceramic Society. 2023;43:7306-7313.
doi:10.1016/j.jeurceramsoc.2023.08.007
https://hdl.handle.net/21.15107/rcub_dais_14877 .

Obradović, Nina, Feng, Lun, Filipović, Suzana, Mirković, Miljana, Kosanović, Darko, Rogan, Jelena, Fahrenholtz, William G., "Effect of mechanical activation on carbothermal synthesis and densification of ZrC" in Journal of the European Ceramic Society, 43 (2023):7306-7313,
https://doi.org/10.1016/j.jeurceramsoc.2023.08.007 .,
https://hdl.handle.net/21.15107/rcub_dais_14877 .

TY  - JOUR
AU  - Milošević, Milica V.
AU  - Radoičić, Marija
AU  - Ohara, Satoshi
AU  - Abe, Hiroya
AU  - Spasojević, Jelena
AU  - Mančić, Lidija
AU  - Šaponjić, Zoran
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14403
AB  - Novel cotton-based TiO2/Ag/TiO2 nanocomposites for wastewater treatment were developed by fine chemical synthesis path with the goal of coping with wastewater issues and environmental remediation. The photocatalytic performances of nanocomposites were tested during photodegradation processes of RB, AO7 and MR under simulated solar light. Double- and single-loaded nanocomposites were synthesized by a simple bottom-up approach implying in situ photoreduction of Ag+ ions on the surface of TiO2 NPs previously deposited on cotton fibers from colloids. The spherical-like colloidal TiO2 NPs (4.5 nm) and TiO2/Ag NPs (8 nm) and the formation of uniform TiO2/Ag and TiO2/Ag/TiO2 nano-coatings on cotton fibers were examined by TEM and FESEM. The reduction of Ag+ ions on TiO2 surface was undoubtedly proven by the appearance of SPR band of Ag NPs in UV/Vis spectra. Raman spectroscopy clearly confirmed the presence of anatase TiO2 in nanocomposites. Quantitative determination of TiO2 and Ag in nanocomposites was accomplished using EDX and ICP–OES. The cotton-based TiO2/Ag/TiO2 nanocomposite showed the highest photocatalytic efficiency (> 90%) and maintained its removal efficiency after three reuse cycles, indicated its exceptional photochemical ability. The initial idea of improved photocatalytic performances of a TiO2 NPs double-layer with immobilized Ag NPs was justified as the TiO2/Ag/TiO2 processed sample contributed additional binding sites for dye molecules. Considering that the photocatalytic activity of the cotton-based TiO2 and TiO2/Ag samples was practically imperceptible, it can be assumed that the synthesized Ag NPs act predominantly as electron traps in the double-loaded synthesized system.
PB  - Springer Science and Business Media LLC
T2  - Cellulose
T1  - Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric
SP  - 4749
EP  - 4771
VL  - 30
DO  - 10.1007/s10570-023-05165-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_14403
ER  - 

@article{
author = "Milošević, Milica V. and Radoičić, Marija and Ohara, Satoshi and Abe, Hiroya and Spasojević, Jelena and Mančić, Lidija and Šaponjić, Zoran",
year = "2023",
abstract = "Novel cotton-based TiO2/Ag/TiO2 nanocomposites for wastewater treatment were developed by fine chemical synthesis path with the goal of coping with wastewater issues and environmental remediation. The photocatalytic performances of nanocomposites were tested during photodegradation processes of RB, AO7 and MR under simulated solar light. Double- and single-loaded nanocomposites were synthesized by a simple bottom-up approach implying in situ photoreduction of Ag+ ions on the surface of TiO2 NPs previously deposited on cotton fibers from colloids. The spherical-like colloidal TiO2 NPs (4.5 nm) and TiO2/Ag NPs (8 nm) and the formation of uniform TiO2/Ag and TiO2/Ag/TiO2 nano-coatings on cotton fibers were examined by TEM and FESEM. The reduction of Ag+ ions on TiO2 surface was undoubtedly proven by the appearance of SPR band of Ag NPs in UV/Vis spectra. Raman spectroscopy clearly confirmed the presence of anatase TiO2 in nanocomposites. Quantitative determination of TiO2 and Ag in nanocomposites was accomplished using EDX and ICP–OES. The cotton-based TiO2/Ag/TiO2 nanocomposite showed the highest photocatalytic efficiency (> 90%) and maintained its removal efficiency after three reuse cycles, indicated its exceptional photochemical ability. The initial idea of improved photocatalytic performances of a TiO2 NPs double-layer with immobilized Ag NPs was justified as the TiO2/Ag/TiO2 processed sample contributed additional binding sites for dye molecules. Considering that the photocatalytic activity of the cotton-based TiO2 and TiO2/Ag samples was practically imperceptible, it can be assumed that the synthesized Ag NPs act predominantly as electron traps in the double-loaded synthesized system.",
publisher = "Springer Science and Business Media LLC",
journal = "Cellulose",
title = "Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric",
pages = "4749-4771",
volume = "30",
doi = "10.1007/s10570-023-05165-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_14403"
}

Milošević, M. V., Radoičić, M., Ohara, S., Abe, H., Spasojević, J., Mančić, L.,& Šaponjić, Z.. (2023). Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric. in Cellulose
Springer Science and Business Media LLC., 30, 4749-4771.
https://doi.org/10.1007/s10570-023-05165-0
https://hdl.handle.net/21.15107/rcub_dais_14403

Milošević MV, Radoičić M, Ohara S, Abe H, Spasojević J, Mančić L, Šaponjić Z. Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric. in Cellulose. 2023;30:4749-4771.
doi:10.1007/s10570-023-05165-0
https://hdl.handle.net/21.15107/rcub_dais_14403 .

Milošević, Milica V., Radoičić, Marija, Ohara, Satoshi, Abe, Hiroya, Spasojević, Jelena, Mančić, Lidija, Šaponjić, Zoran, "Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric" in Cellulose, 30 (2023):4749-4771,
https://doi.org/10.1007/s10570-023-05165-0 .,
https://hdl.handle.net/21.15107/rcub_dais_14403 .

TY  - JOUR
AU  - Milošević, Milica V.
AU  - Radoičić, Marija
AU  - Ohara, Satoshi
AU  - Abe, Hiroya
AU  - Spasojević, Jelena
AU  - Mančić, Lidija
AU  - Šaponjić, Zoran
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14316
AB  - Novel cotton-based TiO2/Ag/TiO2 nanocomposites for wastewater treatment were developed by fine chemical synthesis path with the goal of coping with wastewater issues and environmental remediation. The photocatalytic performances of nanocomposites were tested during photodegradation processes of RB, AO7 and MR under simulated solar light. Double- and single-loaded nanocomposites were synthesized by a simple bottom-up approach implying in situ photoreduction of Ag+ ions on the surface of TiO2 NPs previously deposited on cotton fibers from colloids. The spherical-like colloidal TiO2 NPs (4.5 nm) and TiO2/Ag NPs (8 nm) and the formation of uniform TiO2/Ag and TiO2/Ag/TiO2 nano-coatings on cotton fibers were examined by TEM and FESEM. The reduction of Ag+ ions on TiO2 surface was undoubtedly proven by the appearance of SPR band of Ag NPs in UV/Vis spectra. Raman spectroscopy clearly confirmed the presence of anatase TiO2 in nanocomposites. Quantitative determination of TiO2 and Ag in nanocomposites was accomplished using EDX and ICP–OES. The cotton-based TiO2/Ag/TiO2 nanocomposite showed the highest photocatalytic efficiency (> 90%) and maintained its removal efficiency after three reuse cycles, indicated its exceptional photochemical ability. The initial idea of improved photocatalytic performances of a TiO2 NPs double-layer with immobilized Ag NPs was justified as the TiO2/Ag/TiO2 processed sample contributed additional binding sites for dye molecules. Considering that the photocatalytic activity of the cotton-based TiO2 and TiO2/Ag samples was practically imperceptible, it can be assumed that the synthesized Ag NPs act predominantly as electron traps in the double-loaded synthesized system.
PB  - Springer Science and Business Media LLC
T2  - Cellulose
T1  - Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric
SP  - 4749
EP  - 4771
VL  - 30
DO  - 10.1007/s10570-023-05165-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_14316
ER  - 

@article{
author = "Milošević, Milica V. and Radoičić, Marija and Ohara, Satoshi and Abe, Hiroya and Spasojević, Jelena and Mančić, Lidija and Šaponjić, Zoran",
year = "2023",
abstract = "Novel cotton-based TiO2/Ag/TiO2 nanocomposites for wastewater treatment were developed by fine chemical synthesis path with the goal of coping with wastewater issues and environmental remediation. The photocatalytic performances of nanocomposites were tested during photodegradation processes of RB, AO7 and MR under simulated solar light. Double- and single-loaded nanocomposites were synthesized by a simple bottom-up approach implying in situ photoreduction of Ag+ ions on the surface of TiO2 NPs previously deposited on cotton fibers from colloids. The spherical-like colloidal TiO2 NPs (4.5 nm) and TiO2/Ag NPs (8 nm) and the formation of uniform TiO2/Ag and TiO2/Ag/TiO2 nano-coatings on cotton fibers were examined by TEM and FESEM. The reduction of Ag+ ions on TiO2 surface was undoubtedly proven by the appearance of SPR band of Ag NPs in UV/Vis spectra. Raman spectroscopy clearly confirmed the presence of anatase TiO2 in nanocomposites. Quantitative determination of TiO2 and Ag in nanocomposites was accomplished using EDX and ICP–OES. The cotton-based TiO2/Ag/TiO2 nanocomposite showed the highest photocatalytic efficiency (> 90%) and maintained its removal efficiency after three reuse cycles, indicated its exceptional photochemical ability. The initial idea of improved photocatalytic performances of a TiO2 NPs double-layer with immobilized Ag NPs was justified as the TiO2/Ag/TiO2 processed sample contributed additional binding sites for dye molecules. Considering that the photocatalytic activity of the cotton-based TiO2 and TiO2/Ag samples was practically imperceptible, it can be assumed that the synthesized Ag NPs act predominantly as electron traps in the double-loaded synthesized system.",
publisher = "Springer Science and Business Media LLC",
journal = "Cellulose",
title = "Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric",
pages = "4749-4771",
volume = "30",
doi = "10.1007/s10570-023-05165-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_14316"
}

Milošević, M. V., Radoičić, M., Ohara, S., Abe, H., Spasojević, J., Mančić, L.,& Šaponjić, Z.. (2023). Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric. in Cellulose
Springer Science and Business Media LLC., 30, 4749-4771.
https://doi.org/10.1007/s10570-023-05165-0
https://hdl.handle.net/21.15107/rcub_dais_14316

Milošević MV, Radoičić M, Ohara S, Abe H, Spasojević J, Mančić L, Šaponjić Z. Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric. in Cellulose. 2023;30:4749-4771.
doi:10.1007/s10570-023-05165-0
https://hdl.handle.net/21.15107/rcub_dais_14316 .

Milošević, Milica V., Radoičić, Marija, Ohara, Satoshi, Abe, Hiroya, Spasojević, Jelena, Mančić, Lidija, Šaponjić, Zoran, "Advanced photocatalysis mediated by TiO2/Ag/TiO2 nanoparticles modified cotton fabric" in Cellulose, 30 (2023):4749-4771,
https://doi.org/10.1007/s10570-023-05165-0 .,
https://hdl.handle.net/21.15107/rcub_dais_14316 .