TY  - JOUR
AU  - Mitrašinović, Aleksandar M.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11796
AB  - Moving from fossil fuels toward renewable resources of energy has a worldwide consensus. Solar energy alone can satisfy all our energy requirements since the earth receives 725 ZJ of energy from the sun each year while total human energy consumption in 2019 was 0.584 ZJ. The 2010s are highlighted as a transitional decade when the photovoltaic conversion industry transformed from a subsidized to a profitable energy sector. While photovoltaic energy conversion is a clean process, technologies for producing photovoltaic materials and solar panels affect the environment. The utilization of photovoltaic materials with low impact on the environment during the entire life cycle will mark the beginning of the sustainable transition toward 100% clean renewable energy sources in a sustainable manner. Thus far, only perovskite compounds have the potential to satisfy these requirements because of their theoretical conversion efficiencies, ease of synthesis, production scalability, adaptability, and comparability to existing photovoltaic systems. In this article, the rise of the photovoltaic industry in the last decade is shown and requirements in further transition from renewable to clean sources of renewable energy are foreseen.
PB  - Elsevier BV
T2  - Energy
T1  - Photovoltaics advancements for transition from renewable to clean energy
SP  - 121510
DO  - 10.1016/j.energy.2021.121510
UR  - https://hdl.handle.net/21.15107/rcub_dais_11796
ER  - 

@article{
author = "Mitrašinović, Aleksandar M.",
year = "2021",
abstract = "Moving from fossil fuels toward renewable resources of energy has a worldwide consensus. Solar energy alone can satisfy all our energy requirements since the earth receives 725 ZJ of energy from the sun each year while total human energy consumption in 2019 was 0.584 ZJ. The 2010s are highlighted as a transitional decade when the photovoltaic conversion industry transformed from a subsidized to a profitable energy sector. While photovoltaic energy conversion is a clean process, technologies for producing photovoltaic materials and solar panels affect the environment. The utilization of photovoltaic materials with low impact on the environment during the entire life cycle will mark the beginning of the sustainable transition toward 100% clean renewable energy sources in a sustainable manner. Thus far, only perovskite compounds have the potential to satisfy these requirements because of their theoretical conversion efficiencies, ease of synthesis, production scalability, adaptability, and comparability to existing photovoltaic systems. In this article, the rise of the photovoltaic industry in the last decade is shown and requirements in further transition from renewable to clean sources of renewable energy are foreseen.",
publisher = "Elsevier BV",
journal = "Energy",
title = "Photovoltaics advancements for transition from renewable to clean energy",
pages = "121510",
doi = "10.1016/j.energy.2021.121510",
url = "https://hdl.handle.net/21.15107/rcub_dais_11796"
}

Mitrašinović, A. M.. (2021). Photovoltaics advancements for transition from renewable to clean energy. in Energy
Elsevier BV., 121510.
https://doi.org/10.1016/j.energy.2021.121510
https://hdl.handle.net/21.15107/rcub_dais_11796

Mitrašinović AM. Photovoltaics advancements for transition from renewable to clean energy. in Energy. 2021;:121510.
doi:10.1016/j.energy.2021.121510
https://hdl.handle.net/21.15107/rcub_dais_11796 .

Mitrašinović, Aleksandar M., "Photovoltaics advancements for transition from renewable to clean energy" in Energy (2021):121510,
https://doi.org/10.1016/j.energy.2021.121510 .,
https://hdl.handle.net/21.15107/rcub_dais_11796 .

TY  - JOUR
AU  - Rakočević, Lazar
AU  - Štrbac, Svetlana
AU  - Potočnik, Jelena
AU  - Popović, Maja
AU  - Jugović, Dragana
AU  - Stojković Simatović, Ivana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/10035
AB  - Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 °C, while 3-D tunnel structured Na0·4MnO2 and Na0·44MnO2, both with rod-like morphology, were obtained at 800 °C and 900 °C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0·44MnO2 obtained at 900 °C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.
PB  - Elsevier BV
T2  - Ceramics International
T1  - The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries
SP  - 4595
EP  - 4603
VL  - 47
IS  - 4
DO  - 10.1016/j.ceramint.2020.10.025
UR  - https://hdl.handle.net/21.15107/rcub_dais_10035
ER  - 

@article{
author = "Rakočević, Lazar and Štrbac, Svetlana and Potočnik, Jelena and Popović, Maja and Jugović, Dragana and Stojković Simatović, Ivana",
year = "2021",
abstract = "Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 °C, while 3-D tunnel structured Na0·4MnO2 and Na0·44MnO2, both with rod-like morphology, were obtained at 800 °C and 900 °C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0·44MnO2 obtained at 900 °C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.",
publisher = "Elsevier BV",
journal = "Ceramics International",
title = "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries",
pages = "4595-4603",
volume = "47",
number = "4",
doi = "10.1016/j.ceramint.2020.10.025",
url = "https://hdl.handle.net/21.15107/rcub_dais_10035"
}

Rakočević, L., Štrbac, S., Potočnik, J., Popović, M., Jugović, D.,& Stojković Simatović, I.. (2021). The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International
Elsevier BV., 47(4), 4595-4603.
https://doi.org/10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_10035

Rakočević L, Štrbac S, Potočnik J, Popović M, Jugović D, Stojković Simatović I. The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International. 2021;47(4):4595-4603.
doi:10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_10035 .

Rakočević, Lazar, Štrbac, Svetlana, Potočnik, Jelena, Popović, Maja, Jugović, Dragana, Stojković Simatović, Ivana, "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries" in Ceramics International, 47, no. 4 (2021):4595-4603,
https://doi.org/10.1016/j.ceramint.2020.10.025 .,
https://hdl.handle.net/21.15107/rcub_dais_10035 .

TY  - JOUR
AU  - Rakočević, Lazar
AU  - Štrbac, Svetlana
AU  - Potočnik, Jelena
AU  - Popović, Maja
AU  - Jugović, Dragana
AU  - Stojković Simatović, Ivana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11229
AB  - Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 ◦C, while 3-D tunnel structured Na0⋅4MnO2 and Na0⋅44MnO2, both with rod-like morphology, were obtained at 800 ◦C and 900 ◦C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0⋅44MnO2 obtained at 900 ◦C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.
PB  - Elsevier
T2  - Ceramics International
T1  - The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries
SP  - 4595
EP  - 4603
VL  - 47
IS  - 4
DO  - 10.1016/j.ceramint.2020.10.025
UR  - https://hdl.handle.net/21.15107/rcub_dais_11229
ER  - 

@article{
author = "Rakočević, Lazar and Štrbac, Svetlana and Potočnik, Jelena and Popović, Maja and Jugović, Dragana and Stojković Simatović, Ivana",
year = "2021",
abstract = "Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 ◦C, while 3-D tunnel structured Na0⋅4MnO2 and Na0⋅44MnO2, both with rod-like morphology, were obtained at 800 ◦C and 900 ◦C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0⋅44MnO2 obtained at 900 ◦C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries",
pages = "4595-4603",
volume = "47",
number = "4",
doi = "10.1016/j.ceramint.2020.10.025",
url = "https://hdl.handle.net/21.15107/rcub_dais_11229"
}

Rakočević, L., Štrbac, S., Potočnik, J., Popović, M., Jugović, D.,& Stojković Simatović, I.. (2021). The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International
Elsevier., 47(4), 4595-4603.
https://doi.org/10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_11229

Rakočević L, Štrbac S, Potočnik J, Popović M, Jugović D, Stojković Simatović I. The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International. 2021;47(4):4595-4603.
doi:10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_11229 .

Rakočević, Lazar, Štrbac, Svetlana, Potočnik, Jelena, Popović, Maja, Jugović, Dragana, Stojković Simatović, Ivana, "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries" in Ceramics International, 47, no. 4 (2021):4595-4603,
https://doi.org/10.1016/j.ceramint.2020.10.025 .,
https://hdl.handle.net/21.15107/rcub_dais_11229 .

TY  - JOUR
AU  - Pantović-Pavlović, Marijana
AU  - Pavlović, Miroslav
AU  - Kovačina, Jovanka
AU  - Stanojević, Boris
AU  - Stevanović, Jasmina
AU  - Panić, Vladimir
AU  - Ignjatović, Nenad
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11738
AB  - The cytotoxicity of amorphous calcium phosphate (ACP) and chitosan lactate (ChOL) multifunctional and hybrid composite coatings on MRC-5 human lung fibroblast cell line was elucidated. ACP/TiO2 and ACP/TiO2/ /ChOL were deposited onto Ti by a novel in situ anodization/anaphoretic process at constant voltage. Cytotoxicity tests showed that there was no significant decrease in the survival of healthy MRC-5 cells exposed to composite samples without chitosan lactate, while there was an increase in the number of viable cells in the sample containing ChOL. These findings show that there was improved cell proliferation, differentiation and cell viability in the ChOL-containing sample, which makes ACP/TiO2/ChOL coating a good candidate for applications in medicine and stomatology.
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition
SP  - 555
EP  - 559
VL  - 86
IS  - 6
DO  - 10.2298/JSC210211024P
UR  - https://hdl.handle.net/21.15107/rcub_dais_11738
ER  - 

@article{
author = "Pantović-Pavlović, Marijana and Pavlović, Miroslav and Kovačina, Jovanka and Stanojević, Boris and Stevanović, Jasmina and Panić, Vladimir and Ignjatović, Nenad",
year = "2021",
abstract = "The cytotoxicity of amorphous calcium phosphate (ACP) and chitosan lactate (ChOL) multifunctional and hybrid composite coatings on MRC-5 human lung fibroblast cell line was elucidated. ACP/TiO2 and ACP/TiO2/ /ChOL were deposited onto Ti by a novel in situ anodization/anaphoretic process at constant voltage. Cytotoxicity tests showed that there was no significant decrease in the survival of healthy MRC-5 cells exposed to composite samples without chitosan lactate, while there was an increase in the number of viable cells in the sample containing ChOL. These findings show that there was improved cell proliferation, differentiation and cell viability in the ChOL-containing sample, which makes ACP/TiO2/ChOL coating a good candidate for applications in medicine and stomatology.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition",
pages = "555-559",
volume = "86",
number = "6",
doi = "10.2298/JSC210211024P",
url = "https://hdl.handle.net/21.15107/rcub_dais_11738"
}

Pantović-Pavlović, M., Pavlović, M., Kovačina, J., Stanojević, B., Stevanović, J., Panić, V.,& Ignjatović, N.. (2021). Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 86(6), 555-559.
https://doi.org/10.2298/JSC210211024P
https://hdl.handle.net/21.15107/rcub_dais_11738

Pantović-Pavlović M, Pavlović M, Kovačina J, Stanojević B, Stevanović J, Panić V, Ignjatović N. Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition. in Journal of the Serbian Chemical Society. 2021;86(6):555-559.
doi:10.2298/JSC210211024P
https://hdl.handle.net/21.15107/rcub_dais_11738 .

Pantović-Pavlović, Marijana, Pavlović, Miroslav, Kovačina, Jovanka, Stanojević, Boris, Stevanović, Jasmina, Panić, Vladimir, Ignjatović, Nenad, "Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition" in Journal of the Serbian Chemical Society, 86, no. 6 (2021):555-559,
https://doi.org/10.2298/JSC210211024P .,
https://hdl.handle.net/21.15107/rcub_dais_11738 .

TY  - JOUR
AU  - Balanč, Bojana
AU  - Trifković, Kata
AU  - Pravilović, Radoslava
AU  - Đorđević, Verica
AU  - Marković, Smilja
AU  - Nedović, Viktor
AU  - Bugarski, Branko
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/11622
AB  - The paper reports about the preparation and characterization of hydrogel particles containing liposomes loaded with resveratrol as an active compound. The materials used for preparation of the particles were chosen to be suitable for food industry. Different polymer concentrations affect particles shape, size, size distribution, as well as the release kinetics of resveratrol. The diameter of particles varied from 360 to 754 μm, while the narrow size distribution was observed for all types of particles. Release studies were performed in Franz diffusion cell and the results showed the prolonged release of resveratrol from all samples, but the sample with the highest content of polymer (2.5% w/w) in particular stood out. The research provides useful information about liposomes containing active compound encapsulated in hydrogel matrices and offers the basis for its application in the food industry.
AB  - Ovaj rad daje podatke o pripremi i karakterizaciji čestica koje sadrže lipozome sa inkapsuliranom aktivnom komponentom resveratrolom. Komponente koje ulaze u sastav ovih čestica odabrane su tako da mogu jednostavno da se primene u prehrambenoj industriji. Prikazan je uticaj različitih koncentracija početnih rastvora polimera čija upotreba je dozvoljena u hrani, a samim tim i njihove viskoznosti na veličinu formiranih čestica, njihov oblik i raspodelu veličina, ali i na otpuštanje resveratrola iz ovih složenih sistema. Prečnik čestica bio je između 360 i 754 μm, dok je uska raspodela veličina detektovana u svim uzorcima. Otpuštanje resveratrola praćeno je u Francovoj difuzionoj ćeliji gde su rezultati ukazali na produženo oslobađanje resveratrola u svim uzorcima. Ipak, uzorak koji je imao najveći udeo polimera u početnom rastvoru (2,5% w/w) najsporije je otpuštao aktivnu komponentu. Ovi rezultati daju korisne podatke o kompleksnim sistemima gde je aktivna komponenta inkapsulirana u lipozome dalje obložena polimerom čime doprinose potencijalnoj aplikaciji ovih i sličnih sistema u prehrambene proizvode.
PB  - Novi Sad : University of Novi Sad - Scientific Institute of Food Technology
T2  - Food and Feed Research
T1  - Encapsulation of resveratrol in spherical particles of food grade hydrogels
SP  - 23
EP  - 29
VL  - 44
IS  - 1
DO  - 10.5937/FFR1701023B
UR  - https://hdl.handle.net/21.15107/rcub_dais_11622
ER  - 

@article{
author = "Balanč, Bojana and Trifković, Kata and Pravilović, Radoslava and Đorđević, Verica and Marković, Smilja and Nedović, Viktor and Bugarski, Branko",
year = "2017",
abstract = "The paper reports about the preparation and characterization of hydrogel particles containing liposomes loaded with resveratrol as an active compound. The materials used for preparation of the particles were chosen to be suitable for food industry. Different polymer concentrations affect particles shape, size, size distribution, as well as the release kinetics of resveratrol. The diameter of particles varied from 360 to 754 μm, while the narrow size distribution was observed for all types of particles. Release studies were performed in Franz diffusion cell and the results showed the prolonged release of resveratrol from all samples, but the sample with the highest content of polymer (2.5% w/w) in particular stood out. The research provides useful information about liposomes containing active compound encapsulated in hydrogel matrices and offers the basis for its application in the food industry., Ovaj rad daje podatke o pripremi i karakterizaciji čestica koje sadrže lipozome sa inkapsuliranom aktivnom komponentom resveratrolom. Komponente koje ulaze u sastav ovih čestica odabrane su tako da mogu jednostavno da se primene u prehrambenoj industriji. Prikazan je uticaj različitih koncentracija početnih rastvora polimera čija upotreba je dozvoljena u hrani, a samim tim i njihove viskoznosti na veličinu formiranih čestica, njihov oblik i raspodelu veličina, ali i na otpuštanje resveratrola iz ovih složenih sistema. Prečnik čestica bio je između 360 i 754 μm, dok je uska raspodela veličina detektovana u svim uzorcima. Otpuštanje resveratrola praćeno je u Francovoj difuzionoj ćeliji gde su rezultati ukazali na produženo oslobađanje resveratrola u svim uzorcima. Ipak, uzorak koji je imao najveći udeo polimera u početnom rastvoru (2,5% w/w) najsporije je otpuštao aktivnu komponentu. Ovi rezultati daju korisne podatke o kompleksnim sistemima gde je aktivna komponenta inkapsulirana u lipozome dalje obložena polimerom čime doprinose potencijalnoj aplikaciji ovih i sličnih sistema u prehrambene proizvode.",
publisher = "Novi Sad : University of Novi Sad - Scientific Institute of Food Technology",
journal = "Food and Feed Research",
title = "Encapsulation of resveratrol in spherical particles of food grade hydrogels",
pages = "23-29",
volume = "44",
number = "1",
doi = "10.5937/FFR1701023B",
url = "https://hdl.handle.net/21.15107/rcub_dais_11622"
}

Balanč, B., Trifković, K., Pravilović, R., Đorđević, V., Marković, S., Nedović, V.,& Bugarski, B.. (2017). Encapsulation of resveratrol in spherical particles of food grade hydrogels. in Food and Feed Research
Novi Sad : University of Novi Sad - Scientific Institute of Food Technology., 44(1), 23-29.
https://doi.org/10.5937/FFR1701023B
https://hdl.handle.net/21.15107/rcub_dais_11622

Balanč B, Trifković K, Pravilović R, Đorđević V, Marković S, Nedović V, Bugarski B. Encapsulation of resveratrol in spherical particles of food grade hydrogels. in Food and Feed Research. 2017;44(1):23-29.
doi:10.5937/FFR1701023B
https://hdl.handle.net/21.15107/rcub_dais_11622 .

Balanč, Bojana, Trifković, Kata, Pravilović, Radoslava, Đorđević, Verica, Marković, Smilja, Nedović, Viktor, Bugarski, Branko, "Encapsulation of resveratrol in spherical particles of food grade hydrogels" in Food and Feed Research, 44, no. 1 (2017):23-29,
https://doi.org/10.5937/FFR1701023B .,
https://hdl.handle.net/21.15107/rcub_dais_11622 .