TY  - CONF
AU  - Balać, Igor
AU  - Tang, Chak Yin
AU  - Tsui, C. P.
AU  - Chen, D. Z.
AU  - Uskoković, Petar
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2006
UR  - https://dais.sanu.ac.rs/123456789/11712
AB  - In order to obtain more accurate properties after compaction of hydroxyapatite (HAp)/poly-L-lactide (PLLA) composite, high-resolution measurement of mechanical properties method is proposed to determine the properties of each phase separately, leading to information that are valuable for the development of new materials as well as for predictive modeling purposes. The PLLA polymer processing conditions used in hot pressing of the composite strongly influence final mechanical properties of the material in the solid state. Since the aim was to measure PLLA material properties, acceptable findings could only be made using unconstrained, cured in situ nanoindentation tests. A finite element analysis of the in situ indentation experiment was performed to determine required size of plain polymer area, needed for indentation test, which would minimize the particle influence on the matrix elastic behavior.
PB  - Durnten-Zurich : Trans Tech Publications Ltd.
C3  - Recent Developments in Advanced Materials and Processes
T1  - Nanoindentation of in situ polymers in hydroxyapatite/poly-L-lactide biocomposites
SP  - 501
EP  - 506
DO  - 10.4028/www.scientific.net/MSF.518.501
UR  - https://hdl.handle.net/21.15107/rcub_dais_11712
ER  - 

@conference{
author = "Balać, Igor and Tang, Chak Yin and Tsui, C. P. and Chen, D. Z. and Uskoković, Petar and Ignjatović, Nenad and Uskoković, Dragan",
year = "2006",
abstract = "In order to obtain more accurate properties after compaction of hydroxyapatite (HAp)/poly-L-lactide (PLLA) composite, high-resolution measurement of mechanical properties method is proposed to determine the properties of each phase separately, leading to information that are valuable for the development of new materials as well as for predictive modeling purposes. The PLLA polymer processing conditions used in hot pressing of the composite strongly influence final mechanical properties of the material in the solid state. Since the aim was to measure PLLA material properties, acceptable findings could only be made using unconstrained, cured in situ nanoindentation tests. A finite element analysis of the in situ indentation experiment was performed to determine required size of plain polymer area, needed for indentation test, which would minimize the particle influence on the matrix elastic behavior.",
publisher = "Durnten-Zurich : Trans Tech Publications Ltd.",
journal = "Recent Developments in Advanced Materials and Processes",
title = "Nanoindentation of in situ polymers in hydroxyapatite/poly-L-lactide biocomposites",
pages = "501-506",
doi = "10.4028/www.scientific.net/MSF.518.501",
url = "https://hdl.handle.net/21.15107/rcub_dais_11712"
}

Balać, I., Tang, C. Y., Tsui, C. P., Chen, D. Z., Uskoković, P., Ignjatović, N.,& Uskoković, D.. (2006). Nanoindentation of in situ polymers in hydroxyapatite/poly-L-lactide biocomposites. in Recent Developments in Advanced Materials and Processes
Durnten-Zurich : Trans Tech Publications Ltd.., 501-506.
https://doi.org/10.4028/www.scientific.net/MSF.518.501
https://hdl.handle.net/21.15107/rcub_dais_11712

Balać I, Tang CY, Tsui CP, Chen DZ, Uskoković P, Ignjatović N, Uskoković D. Nanoindentation of in situ polymers in hydroxyapatite/poly-L-lactide biocomposites. in Recent Developments in Advanced Materials and Processes. 2006;:501-506.
doi:10.4028/www.scientific.net/MSF.518.501
https://hdl.handle.net/21.15107/rcub_dais_11712 .

Balać, Igor, Tang, Chak Yin, Tsui, C. P., Chen, D. Z., Uskoković, Petar, Ignjatović, Nenad, Uskoković, Dragan, "Nanoindentation of in situ polymers in hydroxyapatite/poly-L-lactide biocomposites" in Recent Developments in Advanced Materials and Processes (2006):501-506,
https://doi.org/10.4028/www.scientific.net/MSF.518.501 .,
https://hdl.handle.net/21.15107/rcub_dais_11712 .