TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Ž.
AU  - Rakočević, Lazar
AU  - Pavlović, Vera P.
AU  - Ammar-Merah, Souad
AU  - Vujančević, Jelena
AU  - Nikolić, Maria Vesna
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16331
AB  - Mixed spinel ferrites MgxNi1-xFe2O4 were synthesized via sol-gel combustion synthesis with citric acid as fuel, followed by calcination at 700 °C for 3 hours. Obtained powders were characterized via X-ray diffraction analysis (XRD), X-ray photoelectron (XPS), FTIR and Raman spectroscopy and FESEM microscopy. Elemental composition was examined via energy dispersive spectroscopy (EDS). Humidity sensing properties were tested by measuring AC impedance in a climactic chamber at 25 °C and in the relative humidity range of 40–90%. Temperature sensing properties were tested by measuring DC resistance at 40% RH in the temperature range 40–90 °C. Synthesized powders were proven to be pure spinel Fd 3m phase with spherical, slightly agglomerated particles. Substitution of Mg with Ni results in structural changes such as a change in inversion parameter and particle agglomeration, which influences sensing properties of the material. Results show that the sensing properties of magnesium ferrite, which is already a well-established NTC sensor, can be improved by incorporating 10% of nickel in the spinel lattice structure. Mg0.9Ni0.1Fe2O4 exhibited higher temperature sensitivity and higher sensitivity towards humidity compared to MgFe2O4, while further substitution of Mg with Ni resulted in the decline of sensing properties, increase in particle size and agglomeration degree.
PB  - University of Novi Sad, Faculty of Technology, Novi Sad, Serbia
C3  - CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia
T1  - Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7269
ER  - 

@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Ž. and Rakočević, Lazar and Pavlović, Vera P. and Ammar-Merah, Souad and Vujančević, Jelena and Nikolić, Maria Vesna",
year = "2023",
abstract = "Mixed spinel ferrites MgxNi1-xFe2O4 were synthesized via sol-gel combustion synthesis with citric acid as fuel, followed by calcination at 700 °C for 3 hours. Obtained powders were characterized via X-ray diffraction analysis (XRD), X-ray photoelectron (XPS), FTIR and Raman spectroscopy and FESEM microscopy. Elemental composition was examined via energy dispersive spectroscopy (EDS). Humidity sensing properties were tested by measuring AC impedance in a climactic chamber at 25 °C and in the relative humidity range of 40–90%. Temperature sensing properties were tested by measuring DC resistance at 40% RH in the temperature range 40–90 °C. Synthesized powders were proven to be pure spinel Fd 3m phase with spherical, slightly agglomerated particles. Substitution of Mg with Ni results in structural changes such as a change in inversion parameter and particle agglomeration, which influences sensing properties of the material. Results show that the sensing properties of magnesium ferrite, which is already a well-established NTC sensor, can be improved by incorporating 10% of nickel in the spinel lattice structure. Mg0.9Ni0.1Fe2O4 exhibited higher temperature sensitivity and higher sensitivity towards humidity compared to MgFe2O4, while further substitution of Mg with Ni resulted in the decline of sensing properties, increase in particle size and agglomeration degree.",
publisher = "University of Novi Sad, Faculty of Technology, Novi Sad, Serbia",
journal = "CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia",
title = "Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7269"
}

Dojčinović, M., Vasiljević, Z. Ž., Rakočević, L., Pavlović, V. P., Ammar-Merah, S., Vujančević, J.,& Nikolić, M. V.. (2023). Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4. in CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia
University of Novi Sad, Faculty of Technology, Novi Sad, Serbia..
https://hdl.handle.net/21.15107/rcub_machinery_7269

Dojčinović M, Vasiljević ZŽ, Rakočević L, Pavlović VP, Ammar-Merah S, Vujančević J, Nikolić MV. Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4. in CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia. 2023;.
https://hdl.handle.net/21.15107/rcub_machinery_7269 .

Dojčinović, Milena, Vasiljević, Zorka Ž., Rakočević, Lazar, Pavlović, Vera P., Ammar-Merah, Souad, Vujančević, Jelena, Nikolić, Maria Vesna, "Magnesium substitution with nickel and its influence on the sensing properties of MgFe2O4" in CYSC-2023 : 15th EcerS Conference for Young Scientists in Ceramics, Programme and Book of Abstracts; October 11-14, 2023, Novi Sad, Serbia (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7269 .

TY  - JOUR
AU  - Peleš Tadić, Adriana
AU  - Blagojević, Vladimir A.
AU  - Stojanović, Dušica
AU  - Ostojić, Sanja B.
AU  - Tasić, Nikola
AU  - Kosanović, Darko
AU  - Uskoković, Petar
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/13436
AB  - Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) investigated the effect of ZnO nanoparticles on the crystallinity of the polymer, under controlled heating and cooling. Atomic force (AFM) microscopy was used to record the surfaces of the samples. Nanocomposite surface roughness shows the presence of the different phases inside of the matrix, where rough samples contain a higher proportion of the β phase. PFM was performed to investigate the piezoresponse of the composites. Nanoidentation showed that the mechanical activation of the filler (ZnO) increases the Young modulus with the activation time. Molecular simulations in periodic systems (PVDF–ZnO spherical nanocluster and nanocylinder composite) were used to investigate the influence of particle size and shape on the Young modulus of different phases of PVDF.
PB  - Elsevier BV
T2  - Materials Science and Engineering: B
T1  - Nanomechanical properties of PVDF–ZnO polymer nanocomposite
SP  - 116126
VL  - 287
DO  - 10.1016/j.mseb.2022.116126
UR  - https://hdl.handle.net/21.15107/rcub_dais_13436
ER  - 

@article{
author = "Peleš Tadić, Adriana and Blagojević, Vladimir A. and Stojanović, Dušica and Ostojić, Sanja B. and Tasić, Nikola and Kosanović, Darko and Uskoković, Petar and Pavlović, Vladimir B.",
year = "2023",
abstract = "Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) investigated the effect of ZnO nanoparticles on the crystallinity of the polymer, under controlled heating and cooling. Atomic force (AFM) microscopy was used to record the surfaces of the samples. Nanocomposite surface roughness shows the presence of the different phases inside of the matrix, where rough samples contain a higher proportion of the β phase. PFM was performed to investigate the piezoresponse of the composites. Nanoidentation showed that the mechanical activation of the filler (ZnO) increases the Young modulus with the activation time. Molecular simulations in periodic systems (PVDF–ZnO spherical nanocluster and nanocylinder composite) were used to investigate the influence of particle size and shape on the Young modulus of different phases of PVDF.",
publisher = "Elsevier BV",
journal = "Materials Science and Engineering: B",
title = "Nanomechanical properties of PVDF–ZnO polymer nanocomposite",
pages = "116126",
volume = "287",
doi = "10.1016/j.mseb.2022.116126",
url = "https://hdl.handle.net/21.15107/rcub_dais_13436"
}

Peleš Tadić, A., Blagojević, V. A., Stojanović, D., Ostojić, S. B., Tasić, N., Kosanović, D., Uskoković, P.,& Pavlović, V. B.. (2023). Nanomechanical properties of PVDF–ZnO polymer nanocomposite. in Materials Science and Engineering: B
Elsevier BV., 287, 116126.
https://doi.org/10.1016/j.mseb.2022.116126
https://hdl.handle.net/21.15107/rcub_dais_13436

Peleš Tadić A, Blagojević VA, Stojanović D, Ostojić SB, Tasić N, Kosanović D, Uskoković P, Pavlović VB. Nanomechanical properties of PVDF–ZnO polymer nanocomposite. in Materials Science and Engineering: B. 2023;287:116126.
doi:10.1016/j.mseb.2022.116126
https://hdl.handle.net/21.15107/rcub_dais_13436 .

Peleš Tadić, Adriana, Blagojević, Vladimir A., Stojanović, Dušica, Ostojić, Sanja B., Tasić, Nikola, Kosanović, Darko, Uskoković, Petar, Pavlović, Vladimir B., "Nanomechanical properties of PVDF–ZnO polymer nanocomposite" in Materials Science and Engineering: B, 287 (2023):116126,
https://doi.org/10.1016/j.mseb.2022.116126 .,
https://hdl.handle.net/21.15107/rcub_dais_13436 .

TY  - JOUR
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Rakočević, Lazar
AU  - Pavlović, Vera P.
AU  - Ammar-Merah, Souad
AU  - Vujančević, Jelena D.
AU  - Nikolić, Maria Vesna
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14025
AB  - Temperature- and humidity-sensing properties were evaluated of NixMg1-x spinel ferrites (0 ≤ x ≤ 1) synthesized by a sol-gel combustion method using citric acid as fuel and nitrate ions as oxidizing agents. After the exothermic reaction, amorphous powders were calcined at 700 °C followed by characterization with XRD, FTIR, XPS, EDS and Raman spectroscopy and FESEM microscopy. Synthesized powders were tested as humidity- and temperature-sensing materials in the form of thick films on interdigitated electrodes on alumina substrate in a climatic chamber. The physicochemical investigation of synthesized materials revealed a cubic spinel Fd3¯m phase, nanosized but agglomerated particles with a partially to completely inverse spinel structure with increasing Ni content. Ni0.1Mg0.9Fe2O4 showed the highest material constant (B30,90) value of 3747 K and temperature sensitivity (α) of −4.08%/K compared to pure magnesium ferrite (B30,90 value of 3426 K and α of −3.73%/K) and the highest average sensitivity towards humidity of 922 kΩ/%RH in the relative humidity (RH) range of 40–90% at the working temperature of 25 °C.
PB  - Basel : MDPI AG
T2  - Chemosensors
T1  - Humidity and Temperature Sensing of Mixed Nickel–Magnesium Spinel Ferrites
SP  - 34
VL  - 11
IS  - 1
DO  - 10.3390/chemosensors11010034
UR  - https://hdl.handle.net/21.15107/rcub_dais_14025
ER  - 

@article{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Rakočević, Lazar and Pavlović, Vera P. and Ammar-Merah, Souad and Vujančević, Jelena D. and Nikolić, Maria Vesna",
year = "2023",
abstract = "Temperature- and humidity-sensing properties were evaluated of NixMg1-x spinel ferrites (0 ≤ x ≤ 1) synthesized by a sol-gel combustion method using citric acid as fuel and nitrate ions as oxidizing agents. After the exothermic reaction, amorphous powders were calcined at 700 °C followed by characterization with XRD, FTIR, XPS, EDS and Raman spectroscopy and FESEM microscopy. Synthesized powders were tested as humidity- and temperature-sensing materials in the form of thick films on interdigitated electrodes on alumina substrate in a climatic chamber. The physicochemical investigation of synthesized materials revealed a cubic spinel Fd3¯m phase, nanosized but agglomerated particles with a partially to completely inverse spinel structure with increasing Ni content. Ni0.1Mg0.9Fe2O4 showed the highest material constant (B30,90) value of 3747 K and temperature sensitivity (α) of −4.08%/K compared to pure magnesium ferrite (B30,90 value of 3426 K and α of −3.73%/K) and the highest average sensitivity towards humidity of 922 kΩ/%RH in the relative humidity (RH) range of 40–90% at the working temperature of 25 °C.",
publisher = "Basel : MDPI AG",
journal = "Chemosensors",
title = "Humidity and Temperature Sensing of Mixed Nickel–Magnesium Spinel Ferrites",
pages = "34",
volume = "11",
number = "1",
doi = "10.3390/chemosensors11010034",
url = "https://hdl.handle.net/21.15107/rcub_dais_14025"
}

Dojčinović, M. P., Vasiljević, Z. Ž., Rakočević, L., Pavlović, V. P., Ammar-Merah, S., Vujančević, J. D.,& Nikolić, M. V.. (2023). Humidity and Temperature Sensing of Mixed Nickel–Magnesium Spinel Ferrites. in Chemosensors
Basel : MDPI AG., 11(1), 34.
https://doi.org/10.3390/chemosensors11010034
https://hdl.handle.net/21.15107/rcub_dais_14025

Dojčinović MP, Vasiljević ZŽ, Rakočević L, Pavlović VP, Ammar-Merah S, Vujančević JD, Nikolić MV. Humidity and Temperature Sensing of Mixed Nickel–Magnesium Spinel Ferrites. in Chemosensors. 2023;11(1):34.
doi:10.3390/chemosensors11010034
https://hdl.handle.net/21.15107/rcub_dais_14025 .

Dojčinović, Milena P., Vasiljević, Zorka Ž., Rakočević, Lazar, Pavlović, Vera P., Ammar-Merah, Souad, Vujančević, Jelena D., Nikolić, Maria Vesna, "Humidity and Temperature Sensing of Mixed Nickel–Magnesium Spinel Ferrites" in Chemosensors, 11, no. 1 (2023):34,
https://doi.org/10.3390/chemosensors11010034 .,
https://hdl.handle.net/21.15107/rcub_dais_14025 .

TY  - JOUR
AU  - Peleš Tadić, Adriana
AU  - Blagojević, Vladimir A.
AU  - Stojanović, Dušica
AU  - Ostojić, Sanja B.
AU  - Tasić, Nikola
AU  - Kosanović, Darko
AU  - Uskoković, Petar
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/13560
AB  - Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) investigated the effect of ZnO nanoparticles on the crystallinity of the polymer, under controlled heating and cooling. Atomic force (AFM) microscopy was used to record the surfaces of the samples. Nanocomposite surface roughness shows the presence of the different phases inside of the matrix, where rough samples contain a higher proportion of the β phase. PFM was performed to investigate the piezoresponse of the composites. Nanoidentation showed that the mechanical activation of the filler (ZnO) increases the Young modulus with the activation time. Molecular simulations in periodic systems (PVDF–ZnO spherical nanocluster and nanocylinder composite) were used to investigate the influence of particle size and shape on the Young modulus of different phases of PVDF.
PB  - Elsevier BV
T2  - Materials Science and Engineering: B
T1  - Nanomechanical properties of PVDF–ZnO polymer nanocomposite
SP  - 116126
VL  - 287
DO  - 10.1016/j.mseb.2022.116126
UR  - https://hdl.handle.net/21.15107/rcub_dais_13436
ER  - 

@article{
author = "Peleš Tadić, Adriana and Blagojević, Vladimir A. and Stojanović, Dušica and Ostojić, Sanja B. and Tasić, Nikola and Kosanović, Darko and Uskoković, Petar and Pavlović, Vladimir B.",
year = "2023",
abstract = "Poly(vinylidenefluoride)–ZnO (PVDF–ZnO) nanocomposites with mechanically activated ZnO nanoparticle fillers were investigated using thermal and mechanical analysis and AFM and PFM. Differential scanning calorimetry (DSC) investigated the effect of ZnO nanoparticles on the crystallinity of the polymer, under controlled heating and cooling. Atomic force (AFM) microscopy was used to record the surfaces of the samples. Nanocomposite surface roughness shows the presence of the different phases inside of the matrix, where rough samples contain a higher proportion of the β phase. PFM was performed to investigate the piezoresponse of the composites. Nanoidentation showed that the mechanical activation of the filler (ZnO) increases the Young modulus with the activation time. Molecular simulations in periodic systems (PVDF–ZnO spherical nanocluster and nanocylinder composite) were used to investigate the influence of particle size and shape on the Young modulus of different phases of PVDF.",
publisher = "Elsevier BV",
journal = "Materials Science and Engineering: B",
title = "Nanomechanical properties of PVDF–ZnO polymer nanocomposite",
pages = "116126",
volume = "287",
doi = "10.1016/j.mseb.2022.116126",
url = "https://hdl.handle.net/21.15107/rcub_dais_13436"
}

Peleš Tadić, A., Blagojević, V. A., Stojanović, D., Ostojić, S. B., Tasić, N., Kosanović, D., Uskoković, P.,& Pavlović, V. B.. (2023). Nanomechanical properties of PVDF–ZnO polymer nanocomposite. in Materials Science and Engineering: B
Elsevier BV., 287, 116126.
https://doi.org/10.1016/j.mseb.2022.116126
https://hdl.handle.net/21.15107/rcub_dais_13436

Peleš Tadić A, Blagojević VA, Stojanović D, Ostojić SB, Tasić N, Kosanović D, Uskoković P, Pavlović VB. Nanomechanical properties of PVDF–ZnO polymer nanocomposite. in Materials Science and Engineering: B. 2023;287:116126.
doi:10.1016/j.mseb.2022.116126
https://hdl.handle.net/21.15107/rcub_dais_13436 .

Peleš Tadić, Adriana, Blagojević, Vladimir A., Stojanović, Dušica, Ostojić, Sanja B., Tasić, Nikola, Kosanović, Darko, Uskoković, Petar, Pavlović, Vladimir B., "Nanomechanical properties of PVDF–ZnO polymer nanocomposite" in Materials Science and Engineering: B, 287 (2023):116126,
https://doi.org/10.1016/j.mseb.2022.116126 .,
https://hdl.handle.net/21.15107/rcub_dais_13436 .

TY  - JOUR
AU  - Stanković, Mira
AU  - Bartolić, Dragana
AU  - Mutavdžić, Dragosav
AU  - Marković, Smilja
AU  - Grubić, Saša
AU  - Jovanović, Nemanja M.
AU  - Radotić, Ksenija
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/12336
AB  - In this preliminary study, we applied the Multivariate Curve Resolution- Alternating Least Squares (MCR-ALS) method to analyze the excitation-emission matrices of multifloral honey samples, combined with differential scanning calorimetry (DSC) to estimate infection of honey bee colonies with N. ceranae or V. destructor. Fluorescence spectroscopy combined with MCR-ALS was used to determine the ratio of the spectral components originating from proteins (C1) and phenolics (C2), two minor but essential constituents of honey, as a ratiometric indicator of infection level in related hives. The C1/C2 ratio decreased linearly with the increase of infection in both N. ceranae and V. destructor cases, the R2 was 0.941 and 0.912, respectively. Additionally, DSC has shown that the magnitude of changes in sugar environments of the honey samples, reflected in sugar phase transitions, rises with increasing infection level in bee colonies. These results indicate that fluorescence combined with MCR-ALS could be used for rapid, non-destructive and cheap screening of honey to estimate the level of infection of honey bee colonies.
PB  - Taylor and Francis
T2  - Journal of Apicultural Research
T1  - Estimation of honey bee colony infection with Nosema ceranae and Varroa destructor using fluorescence spectroscopy in combination with differential scanning calorimetry of honey samples
SP  - 507
EP  - 513
VL  - 62
IS  - 3
DO  - 10.1080/00218839.2021.1889803
UR  - https://hdl.handle.net/21.15107/rcub_dais_12336
ER  - 

@article{
author = "Stanković, Mira and Bartolić, Dragana and Mutavdžić, Dragosav and Marković, Smilja and Grubić, Saša and Jovanović, Nemanja M. and Radotić, Ksenija",
year = "2023",
abstract = "In this preliminary study, we applied the Multivariate Curve Resolution- Alternating Least Squares (MCR-ALS) method to analyze the excitation-emission matrices of multifloral honey samples, combined with differential scanning calorimetry (DSC) to estimate infection of honey bee colonies with N. ceranae or V. destructor. Fluorescence spectroscopy combined with MCR-ALS was used to determine the ratio of the spectral components originating from proteins (C1) and phenolics (C2), two minor but essential constituents of honey, as a ratiometric indicator of infection level in related hives. The C1/C2 ratio decreased linearly with the increase of infection in both N. ceranae and V. destructor cases, the R2 was 0.941 and 0.912, respectively. Additionally, DSC has shown that the magnitude of changes in sugar environments of the honey samples, reflected in sugar phase transitions, rises with increasing infection level in bee colonies. These results indicate that fluorescence combined with MCR-ALS could be used for rapid, non-destructive and cheap screening of honey to estimate the level of infection of honey bee colonies.",
publisher = "Taylor and Francis",
journal = "Journal of Apicultural Research",
title = "Estimation of honey bee colony infection with Nosema ceranae and Varroa destructor using fluorescence spectroscopy in combination with differential scanning calorimetry of honey samples",
pages = "507-513",
volume = "62",
number = "3",
doi = "10.1080/00218839.2021.1889803",
url = "https://hdl.handle.net/21.15107/rcub_dais_12336"
}

Stanković, M., Bartolić, D., Mutavdžić, D., Marković, S., Grubić, S., Jovanović, N. M.,& Radotić, K.. (2023). Estimation of honey bee colony infection with Nosema ceranae and Varroa destructor using fluorescence spectroscopy in combination with differential scanning calorimetry of honey samples. in Journal of Apicultural Research
Taylor and Francis., 62(3), 507-513.
https://doi.org/10.1080/00218839.2021.1889803
https://hdl.handle.net/21.15107/rcub_dais_12336

Stanković M, Bartolić D, Mutavdžić D, Marković S, Grubić S, Jovanović NM, Radotić K. Estimation of honey bee colony infection with Nosema ceranae and Varroa destructor using fluorescence spectroscopy in combination with differential scanning calorimetry of honey samples. in Journal of Apicultural Research. 2023;62(3):507-513.
doi:10.1080/00218839.2021.1889803
https://hdl.handle.net/21.15107/rcub_dais_12336 .

Stanković, Mira, Bartolić, Dragana, Mutavdžić, Dragosav, Marković, Smilja, Grubić, Saša, Jovanović, Nemanja M., Radotić, Ksenija, "Estimation of honey bee colony infection with Nosema ceranae and Varroa destructor using fluorescence spectroscopy in combination with differential scanning calorimetry of honey samples" in Journal of Apicultural Research, 62, no. 3 (2023):507-513,
https://doi.org/10.1080/00218839.2021.1889803 .,
https://hdl.handle.net/21.15107/rcub_dais_12336 .

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena P.
AU  - Ilić, Nikola
AU  - Vujančević, Jelena
AU  - Nikolić, Maria Vesna
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14664
AB  - Pure phase orthorhombic pseudobrookite (Fe2TiO5) was synthesized using a modified sol-gel method. Bulk samples were obtained by uniaxial pressing of the obtained powder into compacts sintered at 900 °C for 2 h. A noticeable NTC thermistor effect was noted with a B20/55 value of 5747 K and high resistivity of 45 MΩcm at 25 °C. A non-linear current-voltage characteristic was observed in the voltage range (0.2–1100 V) at room temperature (25 °C). Non-saturated (lossy) P-E loops were obtained at both measured frequencies (100 Hz and 1 kHz) more expressed for the higher measured frequency, with the maximal polarization of 0.291 C/cm2 and remanent polarization of 0.123 °C/cm2 for 20 kV/cm2 and 1 kHz. Complex impedance measured in the temperature range 20–330 °C enabled analysis of the contribution of grain boundary and grains to the conduction mechanism. Bulk conductivity data determined in this temperature range was analyzed using Jonscher’s universal dielectric response model and showed that the conduction process followed the nearest neighbor hopping conduction mechanism.
PB  - Belgrade : Institut za multidisciplinarna istraživanja
C3  - Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia
T1  - Investigating NTC thermistor, ferroelectric and electric properties of Fe2TiO5
UR  - https://hdl.handle.net/21.15107/rcub_dais_14664
ER  - 

@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena P. and Ilić, Nikola and Vujančević, Jelena and Nikolić, Maria Vesna",
year = "2023",
abstract = "Pure phase orthorhombic pseudobrookite (Fe2TiO5) was synthesized using a modified sol-gel method. Bulk samples were obtained by uniaxial pressing of the obtained powder into compacts sintered at 900 °C for 2 h. A noticeable NTC thermistor effect was noted with a B20/55 value of 5747 K and high resistivity of 45 MΩcm at 25 °C. A non-linear current-voltage characteristic was observed in the voltage range (0.2–1100 V) at room temperature (25 °C). Non-saturated (lossy) P-E loops were obtained at both measured frequencies (100 Hz and 1 kHz) more expressed for the higher measured frequency, with the maximal polarization of 0.291 C/cm2 and remanent polarization of 0.123 °C/cm2 for 20 kV/cm2 and 1 kHz. Complex impedance measured in the temperature range 20–330 °C enabled analysis of the contribution of grain boundary and grains to the conduction mechanism. Bulk conductivity data determined in this temperature range was analyzed using Jonscher’s universal dielectric response model and showed that the conduction process followed the nearest neighbor hopping conduction mechanism.",
publisher = "Belgrade : Institut za multidisciplinarna istraživanja",
journal = "Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia",
title = "Investigating NTC thermistor, ferroelectric and electric properties of Fe2TiO5",
url = "https://hdl.handle.net/21.15107/rcub_dais_14664"
}

Vasiljević, Z. Ž., Dojčinović, M. P., Ilić, N., Vujančević, J.,& Nikolić, M. V.. (2023). Investigating NTC thermistor, ferroelectric and electric properties of Fe2TiO5. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia
Belgrade : Institut za multidisciplinarna istraživanja..
https://hdl.handle.net/21.15107/rcub_dais_14664

Vasiljević ZŽ, Dojčinović MP, Ilić N, Vujančević J, Nikolić MV. Investigating NTC thermistor, ferroelectric and electric properties of Fe2TiO5. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia. 2023;.
https://hdl.handle.net/21.15107/rcub_dais_14664 .

Vasiljević, Zorka Ž., Dojčinović, Milena P., Ilić, Nikola, Vujančević, Jelena, Nikolić, Maria Vesna, "Investigating NTC thermistor, ferroelectric and electric properties of Fe2TiO5" in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia (2023),
https://hdl.handle.net/21.15107/rcub_dais_14664 .

TY  - CONF
AU  - Королија, Маја
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/15659
AB  - У овом раду желим да испитам потенцијалне епистемолошке „предности” алхемије као парадигме у односу на механичку филозофију у контексту Њутновог (Isaac Newton) научног рада. Тенденција да се на алхемију гледа искључиво као на превазиђену фазу у развоју хемије већ дуже време трпи критике савремених историчара и филозофа науке, 
који такву тезу виде као исувише поједностављену, редукционистичку и 
аисторичну. У тексту представљам перспективу која критички приступа 
посматрању феномена алхемије искључиво кроз проблем демаркације, 
односно разликовања псеудонаучног и научног знања, будући да то може 
довести до неоправданог одбацивања или занемаривања целовитог сагледавања њеног значаја и улоге у различитим историјским контекстима. 
Кроз теоријску анализу и делимичан увид у Њутнов рад, у тексту се приказује историјско-филозофски контекст у коме је алхемија представљала 
парадигму у оквиру које су делале неке од кључних фигура за настанак 
модерне науке.
AB  - In this paper I want to examine the potential epistemological “advantages” 
of alchemy as a paradigm in relation to the mechanical philosophy in the context 
of the scientific work of Isaac Newton. The tendency to see alchemy exclusively 
as an outdated phase in the development of chemistry has long been criticized 
by modern historians and philosophers of science, who see such a thesis as too 
simplistic, reductionist and ahistorical. In the text, I present a perspective that 
critically approaches the observation of the phenomenon of alchemy exclusively 
through the problem of demarcation, ie distinguishing between pseudoscientific and scientific knowledge, since it can lead to unjust rejection or neglect of a 
complete view of its significance and its roll through different historical contexts. 
Through theoretical analysis and limited insight into Newton’s work, the text presents the historical-philosophical context in which alchemy represented a paradigm within which some of the key figures for the emergence of modern science 
had worked.
PB  - Београд : Српска академија наука и уметности
C3  - Филозофија и наука: зборник радова са научног скупа одржаног 21. и 22. октобра 2020. године
T1  - Алхемија као парадигма и фаза у развоју модерне науке
T1  - Alchemy as a paradigm and phase in the development of modern science
SP  - 59
EP  - 69
UR  - https://hdl.handle.net/21.15107/rcub_dais_15659
ER  - 

@conference{
author = "Королија, Маја",
year = "2022",
abstract = "У овом раду желим да испитам потенцијалне епистемолошке „предности” алхемије као парадигме у односу на механичку филозофију у контексту Њутновог (Isaac Newton) научног рада. Тенденција да се на алхемију гледа искључиво као на превазиђену фазу у развоју хемије већ дуже време трпи критике савремених историчара и филозофа науке, 
који такву тезу виде као исувише поједностављену, редукционистичку и 
аисторичну. У тексту представљам перспективу која критички приступа 
посматрању феномена алхемије искључиво кроз проблем демаркације, 
односно разликовања псеудонаучног и научног знања, будући да то може 
довести до неоправданог одбацивања или занемаривања целовитог сагледавања њеног значаја и улоге у различитим историјским контекстима. 
Кроз теоријску анализу и делимичан увид у Њутнов рад, у тексту се приказује историјско-филозофски контекст у коме је алхемија представљала 
парадигму у оквиру које су делале неке од кључних фигура за настанак 
модерне науке., In this paper I want to examine the potential epistemological “advantages” 
of alchemy as a paradigm in relation to the mechanical philosophy in the context 
of the scientific work of Isaac Newton. The tendency to see alchemy exclusively 
as an outdated phase in the development of chemistry has long been criticized 
by modern historians and philosophers of science, who see such a thesis as too 
simplistic, reductionist and ahistorical. In the text, I present a perspective that 
critically approaches the observation of the phenomenon of alchemy exclusively 
through the problem of demarcation, ie distinguishing between pseudoscientific and scientific knowledge, since it can lead to unjust rejection or neglect of a 
complete view of its significance and its roll through different historical contexts. 
Through theoretical analysis and limited insight into Newton’s work, the text presents the historical-philosophical context in which alchemy represented a paradigm within which some of the key figures for the emergence of modern science 
had worked.",
publisher = "Београд : Српска академија наука и уметности",
journal = "Филозофија и наука: зборник радова са научног скупа одржаног 21. и 22. октобра 2020. године",
title = "Алхемија као парадигма и фаза у развоју модерне науке, Alchemy as a paradigm and phase in the development of modern science",
pages = "59-69",
url = "https://hdl.handle.net/21.15107/rcub_dais_15659"
}

Королија, М.. (2022). Алхемија као парадигма и фаза у развоју модерне науке. in Филозофија и наука: зборник радова са научног скупа одржаног 21. и 22. октобра 2020. године
Београд : Српска академија наука и уметности., 59-69.
https://hdl.handle.net/21.15107/rcub_dais_15659

Королија М. Алхемија као парадигма и фаза у развоју модерне науке. in Филозофија и наука: зборник радова са научног скупа одржаног 21. и 22. октобра 2020. године. 2022;:59-69.
https://hdl.handle.net/21.15107/rcub_dais_15659 .

Королија, Маја, "Алхемија као парадигма и фаза у развоју модерне науке" in Филозофија и наука: зборник радова са научног скупа одржаног 21. и 22. октобра 2020. године (2022):59-69,
https://hdl.handle.net/21.15107/rcub_dais_15659 .

TY  - CONF
AU  - Labus, Nebojša
AU  - Marković, Smilja
AU  - Nikolić, Maria Vesna
AU  - Rosić, Milena
AU  - Matijašević, Srđan
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13641
AB  - Sintering and phase transition are often superimposed at dimensional change diagram recorded during heating. Phase transition kinetic is thus hard to deconvolute due to the superposition of the sintering and phase transition dimensional change phenomena. Metastabile perovskite phase ZnTiO3has transition to stabile spinel Zn2TiO4which occurs at 945oC with high kinetic rate. Nano powder with 40 nm particle diameter was pressed uniaxially at 200 MPa pressure without binder to form compact that will be consequently sintered. Dimensional change during heating was monitored using dilatometric thermo-mechanical analyzer TMA model SETSYS Evolution. Lever`s rule was used to calculate amount of the emerging phase during phase transition. The compacted specimens were treated on the nonisothermal schedule up to 1050oC.Sintering phenomenon of the ZnTiO3 nanopowder compact was also recorded up to 900oCwith isothermal holding of 25 minutes where phase transition was avoided due to lower temperature and isothermal holding. Second run heating of the obtained sintered specimens were recorded with the heating schedule of non-isothermal heating up to 1050oC. Kinetic of the phase transition was obtained from dilatograms recorded during sintering and from bulk on the second run heating. Furthermore, phase transition kinetics was obtained by subsequent data subtraction of the sintering curves without phase transition from the dilatation sintering curves containing phase transition. In such a manner complex kinetics of phenomena such as sintering, linear expansion and phase transition recorded as dimensional change during heating brings the recognition of their mutual interconnected relations. Also application of these mathematical operations on dilatometric data leads to the established procedure for the sintering and phase transition data treatment.
PB  - Belgrade : ETRAN Society
PB  - Belgrade : Academic Mind
C3  - Зборник радова / IX међународне конференције ИцЕТРАН и LXVI конференције ЕТРАН, Нови Пазар 6-9. јуна 2022. године = Proceedings / IX International Conference IcETRAN and LXVI ETRAN Conference, Novi Pazar, Serbia, 6-9, June, 2022
T1  - Sintering and Phase Transition of the ZnTiO3 Nano Powder Dilatometric Data Deconvolution
SP  - 479
EP  - 486
UR  - https://hdl.handle.net/21.15107/rcub_dais_13641
ER  - 

@conference{
author = "Labus, Nebojša and Marković, Smilja and Nikolić, Maria Vesna and Rosić, Milena and Matijašević, Srđan",
year = "2022",
abstract = "Sintering and phase transition are often superimposed at dimensional change diagram recorded during heating. Phase transition kinetic is thus hard to deconvolute due to the superposition of the sintering and phase transition dimensional change phenomena. Metastabile perovskite phase ZnTiO3has transition to stabile spinel Zn2TiO4which occurs at 945oC with high kinetic rate. Nano powder with 40 nm particle diameter was pressed uniaxially at 200 MPa pressure without binder to form compact that will be consequently sintered. Dimensional change during heating was monitored using dilatometric thermo-mechanical analyzer TMA model SETSYS Evolution. Lever`s rule was used to calculate amount of the emerging phase during phase transition. The compacted specimens were treated on the nonisothermal schedule up to 1050oC.Sintering phenomenon of the ZnTiO3 nanopowder compact was also recorded up to 900oCwith isothermal holding of 25 minutes where phase transition was avoided due to lower temperature and isothermal holding. Second run heating of the obtained sintered specimens were recorded with the heating schedule of non-isothermal heating up to 1050oC. Kinetic of the phase transition was obtained from dilatograms recorded during sintering and from bulk on the second run heating. Furthermore, phase transition kinetics was obtained by subsequent data subtraction of the sintering curves without phase transition from the dilatation sintering curves containing phase transition. In such a manner complex kinetics of phenomena such as sintering, linear expansion and phase transition recorded as dimensional change during heating brings the recognition of their mutual interconnected relations. Also application of these mathematical operations on dilatometric data leads to the established procedure for the sintering and phase transition data treatment.",
publisher = "Belgrade : ETRAN Society, Belgrade : Academic Mind",
journal = "Зборник радова / IX међународне конференције ИцЕТРАН и LXVI конференције ЕТРАН, Нови Пазар 6-9. јуна 2022. године = Proceedings / IX International Conference IcETRAN and LXVI ETRAN Conference, Novi Pazar, Serbia, 6-9, June, 2022",
title = "Sintering and Phase Transition of the ZnTiO3 Nano Powder Dilatometric Data Deconvolution",
pages = "479-486",
url = "https://hdl.handle.net/21.15107/rcub_dais_13641"
}

Labus, N., Marković, S., Nikolić, M. V., Rosić, M.,& Matijašević, S.. (2022). Sintering and Phase Transition of the ZnTiO3 Nano Powder Dilatometric Data Deconvolution. in Зборник радова / IX међународне конференције ИцЕТРАН и LXVI конференције ЕТРАН, Нови Пазар 6-9. јуна 2022. године = Proceedings / IX International Conference IcETRAN and LXVI ETRAN Conference, Novi Pazar, Serbia, 6-9, June, 2022
Belgrade : ETRAN Society., 479-486.
https://hdl.handle.net/21.15107/rcub_dais_13641

Labus N, Marković S, Nikolić MV, Rosić M, Matijašević S. Sintering and Phase Transition of the ZnTiO3 Nano Powder Dilatometric Data Deconvolution. in Зборник радова / IX међународне конференције ИцЕТРАН и LXVI конференције ЕТРАН, Нови Пазар 6-9. јуна 2022. године = Proceedings / IX International Conference IcETRAN and LXVI ETRAN Conference, Novi Pazar, Serbia, 6-9, June, 2022. 2022;:479-486.
https://hdl.handle.net/21.15107/rcub_dais_13641 .

Labus, Nebojša, Marković, Smilja, Nikolić, Maria Vesna, Rosić, Milena, Matijašević, Srđan, "Sintering and Phase Transition of the ZnTiO3 Nano Powder Dilatometric Data Deconvolution" in Зборник радова / IX међународне конференције ИцЕТРАН и LXVI конференције ЕТРАН, Нови Пазар 6-9. јуна 2022. године = Proceedings / IX International Conference IcETRAN and LXVI ETRAN Conference, Novi Pazar, Serbia, 6-9, June, 2022 (2022):479-486,
https://hdl.handle.net/21.15107/rcub_dais_13641 .

TY  - CONF
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad
AU  - Nikolić, Maria Vesna
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13642
AB  - Problems that countries all over the world have in common are dependence of economy and energy production on fossil fuels. There is a growing need for energy production and storage routes that are safe for the environment, renewable, efficient and cheap. One of the directions in which science is moving forward is discovering materials suitable for use in batteries and supercapacitors to improve their operating potential, electrical capacity or biocompatibility. The objective is also to synthesize materials for batteries or supercapacitors that are cheap, consist of earth abundant elements and have high electrochemical activity.
In this work, mixed nickel-magnesium ferrites NixMg1−xFe2O4, with x being 0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1, were synthesized via sol-gel combustion synthesis with citric acid used as fuel and nitrate ions used as oxidizing agents. Combusted powders were calcined at 700 °C. The structure and morphology of the powders were characterized with X-ray diffraction method (XRD), field emission scanning electron microscopy (FESEM), Raman and FTIR spectroscopy. The band gap was calculated by using UV/Vis diffuse reflectance spectroscopy (DRS). Samples were cast on nickel foam and tested as energy storage materials in a three-electrode setup in 3 M KOH aqueous solution as electrolyte. The methods used were cyclic voltammetry (CV) and constant current chronopotentiometry to obtain galvanostatic charge-discharge (GCD) curves. Results show that all of the synthesized materials show battery-type charge storage in alkaline electrolyte due to the formation of metal cation oxyhydroxides. With increasing nickel content, electrochemical activity drops. The highest value of capacity, 34.3 mA h g-1 at the current density of 500 mA g-1 is ascribed to magnesium ferrite, MgFe2O4.
PB  - Belgrade : University of Belgrade, Faculty of Physical Chemistry
C3  - Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022
T1  - Mixed Ni-Mg Spinel Ferrites Used as Materials for Charge Storage Electrodes
SP  - 47
EP  - 47
UR  - https://hdl.handle.net/21.15107/rcub_dais_13642
ER  - 

@conference{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Pavlović, Vera P. and Vujančević, Jelena and Tadić, Nenad and Nikolić, Maria Vesna",
year = "2022",
abstract = "Problems that countries all over the world have in common are dependence of economy and energy production on fossil fuels. There is a growing need for energy production and storage routes that are safe for the environment, renewable, efficient and cheap. One of the directions in which science is moving forward is discovering materials suitable for use in batteries and supercapacitors to improve their operating potential, electrical capacity or biocompatibility. The objective is also to synthesize materials for batteries or supercapacitors that are cheap, consist of earth abundant elements and have high electrochemical activity.
In this work, mixed nickel-magnesium ferrites NixMg1−xFe2O4, with x being 0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1, were synthesized via sol-gel combustion synthesis with citric acid used as fuel and nitrate ions used as oxidizing agents. Combusted powders were calcined at 700 °C. The structure and morphology of the powders were characterized with X-ray diffraction method (XRD), field emission scanning electron microscopy (FESEM), Raman and FTIR spectroscopy. The band gap was calculated by using UV/Vis diffuse reflectance spectroscopy (DRS). Samples were cast on nickel foam and tested as energy storage materials in a three-electrode setup in 3 M KOH aqueous solution as electrolyte. The methods used were cyclic voltammetry (CV) and constant current chronopotentiometry to obtain galvanostatic charge-discharge (GCD) curves. Results show that all of the synthesized materials show battery-type charge storage in alkaline electrolyte due to the formation of metal cation oxyhydroxides. With increasing nickel content, electrochemical activity drops. The highest value of capacity, 34.3 mA h g-1 at the current density of 500 mA g-1 is ascribed to magnesium ferrite, MgFe2O4.",
publisher = "Belgrade : University of Belgrade, Faculty of Physical Chemistry",
journal = "Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022",
title = "Mixed Ni-Mg Spinel Ferrites Used as Materials for Charge Storage Electrodes",
pages = "47-47",
url = "https://hdl.handle.net/21.15107/rcub_dais_13642"
}

Dojčinović, M. P., Vasiljević, Z. Ž., Pavlović, V. P., Vujančević, J., Tadić, N.,& Nikolić, M. V.. (2022). Mixed Ni-Mg Spinel Ferrites Used as Materials for Charge Storage Electrodes. in Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022
Belgrade : University of Belgrade, Faculty of Physical Chemistry., 47-47.
https://hdl.handle.net/21.15107/rcub_dais_13642

Dojčinović MP, Vasiljević ZŽ, Pavlović VP, Vujančević J, Tadić N, Nikolić MV. Mixed Ni-Mg Spinel Ferrites Used as Materials for Charge Storage Electrodes. in Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022. 2022;:47-47.
https://hdl.handle.net/21.15107/rcub_dais_13642 .

Dojčinović, Milena P., Vasiljević, Zorka Ž., Pavlović, Vera P., Vujančević, Jelena, Tadić, Nenad, Nikolić, Maria Vesna, "Mixed Ni-Mg Spinel Ferrites Used as Materials for Charge Storage Electrodes" in Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022 (2022):47-47,
https://hdl.handle.net/21.15107/rcub_dais_13642 .

TY  - JOUR
AU  - Rizzotto, Francesco
AU  - Vasiljević, Zorka Ž.
AU  - Stanojević, Gordana
AU  - Dojčinović, Milena P.
AU  - Janković-Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Branković, Goran
AU  - Magniez, Aurélie
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13437
AB  - An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.
PB  - Elsevier Ltd
T2  - Food Chemistry
T1  - Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application
SP  - 133198
VL  - 390
DO  - 10.1016/j.foodchem.2022.133198
UR  - https://hdl.handle.net/21.15107/rcub_dais_13437
ER  - 

@article{
author = "Rizzotto, Francesco and Vasiljević, Zorka Ž. and Stanojević, Gordana and Dojčinović, Milena P. and Janković-Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Branković, Goran and Magniez, Aurélie and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2022",
abstract = "An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.",
publisher = "Elsevier Ltd",
journal = "Food Chemistry",
title = "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application",
pages = "133198",
volume = "390",
doi = "10.1016/j.foodchem.2022.133198",
url = "https://hdl.handle.net/21.15107/rcub_dais_13437"
}

Rizzotto, F., Vasiljević, Z. Ž., Stanojević, G., Dojčinović, M. P., Janković-Častvan, I., Vujančević, J., Tadić, N. B., Branković, G., Magniez, A., Vidić, J.,& Nikolić, M. V.. (2022). Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry
Elsevier Ltd., 390, 133198.
https://doi.org/10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13437

Rizzotto F, Vasiljević ZŽ, Stanojević G, Dojčinović MP, Janković-Častvan I, Vujančević J, Tadić NB, Branković G, Magniez A, Vidić J, Nikolić MV. Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry. 2022;390:133198.
doi:10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13437 .

Rizzotto, Francesco, Vasiljević, Zorka Ž., Stanojević, Gordana, Dojčinović, Milena P., Janković-Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Branković, Goran, Magniez, Aurélie, Vidić, Jasmina, Nikolić, Maria Vesna, "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application" in Food Chemistry, 390 (2022):133198,
https://doi.org/10.1016/j.foodchem.2022.133198 .,
https://hdl.handle.net/21.15107/rcub_dais_13437 .

TY  - JOUR
AU  - Rizzotto, Francesco
AU  - Vasiljević, Zorka Ž.
AU  - Stanojević, Gordana
AU  - Dojčinović, Milena P.
AU  - Janković-Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Branković, Goran
AU  - Magniez, Aurélie
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13014
AB  - An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.
PB  - Elsevier Ltd
T2  - Food Chemistry
T1  - Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application
SP  - 133198
VL  - 390
DO  - 10.1016/j.foodchem.2022.133198
UR  - https://hdl.handle.net/21.15107/rcub_dais_13014
ER  - 

@article{
author = "Rizzotto, Francesco and Vasiljević, Zorka Ž. and Stanojević, Gordana and Dojčinović, Milena P. and Janković-Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Branković, Goran and Magniez, Aurélie and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2022",
abstract = "An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.",
publisher = "Elsevier Ltd",
journal = "Food Chemistry",
title = "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application",
pages = "133198",
volume = "390",
doi = "10.1016/j.foodchem.2022.133198",
url = "https://hdl.handle.net/21.15107/rcub_dais_13014"
}

Rizzotto, F., Vasiljević, Z. Ž., Stanojević, G., Dojčinović, M. P., Janković-Častvan, I., Vujančević, J., Tadić, N. B., Branković, G., Magniez, A., Vidić, J.,& Nikolić, M. V.. (2022). Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry
Elsevier Ltd., 390, 133198.
https://doi.org/10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13014

Rizzotto F, Vasiljević ZŽ, Stanojević G, Dojčinović MP, Janković-Častvan I, Vujančević J, Tadić NB, Branković G, Magniez A, Vidić J, Nikolić MV. Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry. 2022;390:133198.
doi:10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13014 .

Rizzotto, Francesco, Vasiljević, Zorka Ž., Stanojević, Gordana, Dojčinović, Milena P., Janković-Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Branković, Goran, Magniez, Aurélie, Vidić, Jasmina, Nikolić, Maria Vesna, "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application" in Food Chemistry, 390 (2022):133198,
https://doi.org/10.1016/j.foodchem.2022.133198 .,
https://hdl.handle.net/21.15107/rcub_dais_13014 .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Labus, Nebojša
AU  - Pavlović, Vera P.
AU  - Marković, Smilja
AU  - Luković, Miloljub D.
AU  - Tadić, Nenad B.
AU  - Vujančević, Jelena
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11954
AB  - Nanocrystalline Zn2SnO4/SnO2 powder was obtained by a solid state reaction of ZnO and SnO2 nanopowders mixed in the molar ratio 1:1. The phase composition of the obtained powder was studied by XRD and Raman spectroscopy, morphology and texture were characterized by FESEM, TEM, BET and Hg porosimetry, while XPS and FTIR spectroscopy were used to determine the surface chemistry. The influence of humidity on complex impedance was monitored on bulk samples in the relative humidity (RH) range 30–90% in a climatic chamber in the frequency range 42 Hz- 1 MHz at working temperatures of 25 and 50 °C. Change in RH had a significant influence on impedance reduction, especially noticeable in the lower frequency range, indicating potential application of this nanocomposite as a humidity sensing material. Increase in RH led to an increase in AC conductivity that changed with frequency according to the Jonscher power law. The frequency exponent decreased with increase in RH and sample temperature indicating that the correlated hopping barrier model is the dominant conduction mechanism. Complex impedance was analyzed using an equivalent circuit consisting of a parallel resistance and constant phase element, showing the dominant influence of grain boundaries at both working temperatures (25 and 50 °C). The resistance decreased, while the capacitance and relaxation frequency increased with increase in RH. At high humidity an added Wartburg element enabled modeling of the charge diffusion process
PB  - Springer
T2  - Journal of Electroceramics
T1  - Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance
SP  - 135
EP  - 147
VL  - 45
DO  - 10.1007/s10832-021-00232-z
UR  - https://hdl.handle.net/21.15107/rcub_dais_11954
ER  - 

@article{
author = "Nikolić, Maria Vesna and Labus, Nebojša and Pavlović, Vera P. and Marković, Smilja and Luković, Miloljub D. and Tadić, Nenad B. and Vujančević, Jelena and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2021",
abstract = "Nanocrystalline Zn2SnO4/SnO2 powder was obtained by a solid state reaction of ZnO and SnO2 nanopowders mixed in the molar ratio 1:1. The phase composition of the obtained powder was studied by XRD and Raman spectroscopy, morphology and texture were characterized by FESEM, TEM, BET and Hg porosimetry, while XPS and FTIR spectroscopy were used to determine the surface chemistry. The influence of humidity on complex impedance was monitored on bulk samples in the relative humidity (RH) range 30–90% in a climatic chamber in the frequency range 42 Hz- 1 MHz at working temperatures of 25 and 50 °C. Change in RH had a significant influence on impedance reduction, especially noticeable in the lower frequency range, indicating potential application of this nanocomposite as a humidity sensing material. Increase in RH led to an increase in AC conductivity that changed with frequency according to the Jonscher power law. The frequency exponent decreased with increase in RH and sample temperature indicating that the correlated hopping barrier model is the dominant conduction mechanism. Complex impedance was analyzed using an equivalent circuit consisting of a parallel resistance and constant phase element, showing the dominant influence of grain boundaries at both working temperatures (25 and 50 °C). The resistance decreased, while the capacitance and relaxation frequency increased with increase in RH. At high humidity an added Wartburg element enabled modeling of the charge diffusion process",
publisher = "Springer",
journal = "Journal of Electroceramics",
title = "Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance",
pages = "135-147",
volume = "45",
doi = "10.1007/s10832-021-00232-z",
url = "https://hdl.handle.net/21.15107/rcub_dais_11954"
}

Nikolić, M. V., Labus, N., Pavlović, V. P., Marković, S., Luković, M. D., Tadić, N. B., Vujančević, J., Vlahović, B.,& Pavlović, V. B.. (2021). Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance. in Journal of Electroceramics
Springer., 45, 135-147.
https://doi.org/10.1007/s10832-021-00232-z
https://hdl.handle.net/21.15107/rcub_dais_11954

Nikolić MV, Labus N, Pavlović VP, Marković S, Luković MD, Tadić NB, Vujančević J, Vlahović B, Pavlović VB. Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance. in Journal of Electroceramics. 2021;45:135-147.
doi:10.1007/s10832-021-00232-z
https://hdl.handle.net/21.15107/rcub_dais_11954 .

Nikolić, Maria Vesna, Labus, Nebojša, Pavlović, Vera P., Marković, Smilja, Luković, Miloljub D., Tadić, Nenad B., Vujančević, Jelena, Vlahović, Branislav, Pavlović, Vladimir B., "Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance" in Journal of Electroceramics, 45 (2021):135-147,
https://doi.org/10.1007/s10832-021-00232-z .,
https://hdl.handle.net/21.15107/rcub_dais_11954 .

TY  - JOUR
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena D.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolic, Maria Vesna
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11797
AB  - Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.
PB  - Basel : MDPI AG
T2  - Sensors
T1  - Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing
SP  - 4357
VL  - 21
IS  - 13
DO  - 10.3390/s21134357
UR  - https://hdl.handle.net/21.15107/rcub_dais_11797
ER  - 

@article{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Krstić, Jugoslav B. and Vujančević, Jelena D. and Marković, Smilja and Tadić, Nenad B. and Nikolic, Maria Vesna",
year = "2021",
abstract = "Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.",
publisher = "Basel : MDPI AG",
journal = "Sensors",
title = "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing",
pages = "4357",
volume = "21",
number = "13",
doi = "10.3390/s21134357",
url = "https://hdl.handle.net/21.15107/rcub_dais_11797"
}

Dojčinović, M. P., Vasiljević, Z. Ž., Krstić, J. B., Vujančević, J. D., Marković, S., Tadić, N. B.,& Nikolic, M. V.. (2021). Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors
Basel : MDPI AG., 21(13), 4357.
https://doi.org/10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797

Dojčinović MP, Vasiljević ZŽ, Krstić JB, Vujančević JD, Marković S, Tadić NB, Nikolic MV. Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors. 2021;21(13):4357.
doi:10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797 .

Dojčinović, Milena P., Vasiljević, Zorka Ž., Krstić, Jugoslav B., Vujančević, Jelena D., Marković, Smilja, Tadić, Nenad B., Nikolic, Maria Vesna, "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing" in Sensors, 21, no. 13 (2021):4357,
https://doi.org/10.3390/s21134357 .,
https://hdl.handle.net/21.15107/rcub_dais_11797 .

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena P.
AU  - Vujančević, Jelena D.
AU  - Spreitzer, Matjaž
AU  - Kovač, Janez
AU  - Bartolić, Dragana
AU  - Marković, Smilja
AU  - Janković-Čaštvan, Ivona
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12338
AB  - Nanostructured Fe2TiO5 (pseudobrookite), a mixed metal oxide material holds significant promise for utilization in energy and environmental applications. However, its full application is still hindered due to the difficulty to synthesize monophasic Fe2TiO5 with high crystallinity and a large specific surface area. Herein, Fe2TiO5 nanofibers were synthesized via a versatile and low-cost electrospinning method, followed by a calcination process at different temperatures. We found a significant effect of the calcination process and its duration on the crystalline phase in the form of either pseudobrookite or pseudobrookite–hematite–rutile and the morphology of calcined nanofibers. The crystallite size increased whereas the specific surface area decreased with an increase in calcination temperature. At higher temperatures, the growth of Fe2TiO5 nanoparticles and simultaneous coalescence of small particles was noted. The highest specific surface area was obtained for the sample calcined at 500 °C for 6 h (SBET = 64.4 m2 g−1). This work opens new opportunities in the synthesis of Fe2TiO5 nanostructures using the electrospinning method and a subsequent optimized calcination process for energy-related applications.
PB  - Royal Society of Chemistry (RSC)
T2  - RSC Advances
T1  - Exploring the impact of calcination parameters on the crystal structure, morphology, and optical properties of electrospun Fe                    2                    TiO                    5                    nanofibers
SP  - 32358
EP  - 32368
VL  - 11
IS  - 51
DO  - 10.1039/D1RA05748K
UR  - https://hdl.handle.net/21.15107/rcub_dais_12338
ER  - 

@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena P. and Vujančević, Jelena D. and Spreitzer, Matjaž and Kovač, Janez and Bartolić, Dragana and Marković, Smilja and Janković-Čaštvan, Ivona and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2021",
abstract = "Nanostructured Fe2TiO5 (pseudobrookite), a mixed metal oxide material holds significant promise for utilization in energy and environmental applications. However, its full application is still hindered due to the difficulty to synthesize monophasic Fe2TiO5 with high crystallinity and a large specific surface area. Herein, Fe2TiO5 nanofibers were synthesized via a versatile and low-cost electrospinning method, followed by a calcination process at different temperatures. We found a significant effect of the calcination process and its duration on the crystalline phase in the form of either pseudobrookite or pseudobrookite–hematite–rutile and the morphology of calcined nanofibers. The crystallite size increased whereas the specific surface area decreased with an increase in calcination temperature. At higher temperatures, the growth of Fe2TiO5 nanoparticles and simultaneous coalescence of small particles was noted. The highest specific surface area was obtained for the sample calcined at 500 °C for 6 h (SBET = 64.4 m2 g−1). This work opens new opportunities in the synthesis of Fe2TiO5 nanostructures using the electrospinning method and a subsequent optimized calcination process for energy-related applications.",
publisher = "Royal Society of Chemistry (RSC)",
journal = "RSC Advances",
title = "Exploring the impact of calcination parameters on the crystal structure, morphology, and optical properties of electrospun Fe                    2                    TiO                    5                    nanofibers",
pages = "32358-32368",
volume = "11",
number = "51",
doi = "10.1039/D1RA05748K",
url = "https://hdl.handle.net/21.15107/rcub_dais_12338"
}

Vasiljević, Z. Ž., Dojčinović, M. P., Vujančević, J. D., Spreitzer, M., Kovač, J., Bartolić, D., Marković, S., Janković-Čaštvan, I., Tadić, N. B.,& Nikolić, M. V.. (2021). Exploring the impact of calcination parameters on the crystal structure, morphology, and optical properties of electrospun Fe                    2                    TiO                    5                    nanofibers. in RSC Advances
Royal Society of Chemistry (RSC)., 11(51), 32358-32368.
https://doi.org/10.1039/D1RA05748K
https://hdl.handle.net/21.15107/rcub_dais_12338

Vasiljević ZŽ, Dojčinović MP, Vujančević JD, Spreitzer M, Kovač J, Bartolić D, Marković S, Janković-Čaštvan I, Tadić NB, Nikolić MV. Exploring the impact of calcination parameters on the crystal structure, morphology, and optical properties of electrospun Fe                    2                    TiO                    5                    nanofibers. in RSC Advances. 2021;11(51):32358-32368.
doi:10.1039/D1RA05748K
https://hdl.handle.net/21.15107/rcub_dais_12338 .

Vasiljević, Zorka Ž., Dojčinović, Milena P., Vujančević, Jelena D., Spreitzer, Matjaž, Kovač, Janez, Bartolić, Dragana, Marković, Smilja, Janković-Čaštvan, Ivona, Tadić, Nenad B., Nikolić, Maria Vesna, "Exploring the impact of calcination parameters on the crystal structure, morphology, and optical properties of electrospun Fe                    2                    TiO                    5                    nanofibers" in RSC Advances, 11, no. 51 (2021):32358-32368,
https://doi.org/10.1039/D1RA05748K .,
https://hdl.handle.net/21.15107/rcub_dais_12338 .

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Janković Častvan, Ivona
AU  - Ognjanović, M.
AU  - Tadić, Nenad B.
AU  - Stojadinović, Stevan
AU  - Branković, Goran
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9107
AB  - The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.
PB  - Royal Society
T2  - Royal Society Open Science
T1  - Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method
VL  - 7
IS  - 9
DO  - 10.1098/rsos.200708
UR  - https://hdl.handle.net/21.15107/rcub_dais_9107
ER  - 

@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Janković Častvan, Ivona and Ognjanović, M. and Tadić, Nenad B. and Stojadinović, Stevan and Branković, Goran and Nikolić, Maria Vesna",
year = "2020",
abstract = "The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.",
publisher = "Royal Society",
journal = "Royal Society Open Science",
title = "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method",
volume = "7",
number = "9",
doi = "10.1098/rsos.200708",
url = "https://hdl.handle.net/21.15107/rcub_dais_9107"
}

Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J., Janković Častvan, I., Ognjanović, M., Tadić, N. B., Stojadinović, S., Branković, G.,& Nikolić, M. V.. (2020). Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science
Royal Society., 7(9).
https://doi.org/10.1098/rsos.200708
https://hdl.handle.net/21.15107/rcub_dais_9107

Vasiljević ZŽ, Dojčinović M, Vujančević J, Janković Častvan I, Ognjanović M, Tadić NB, Stojadinović S, Branković G, Nikolić MV. Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science. 2020;7(9).
doi:10.1098/rsos.200708
https://hdl.handle.net/21.15107/rcub_dais_9107 .

Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Janković Častvan, Ivona, Ognjanović, M., Tadić, Nenad B., Stojadinović, Stevan, Branković, Goran, Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method" in Royal Society Open Science, 7, no. 9 (2020),
https://doi.org/10.1098/rsos.200708 .,
https://hdl.handle.net/21.15107/rcub_dais_9107 .

TY  - CONF
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena P.
AU  - Vujančević, Jelena
AU  - Radovanović, Milan
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/8965
AB  - This work deals with our continued research of oxide materials for potential application in gas/humidity sensing. We have made thick film samples using iron manganite powder synthesized by a sol-gel combustion method with a net-like structure, by screen printing on alumina substrate with PdAg interdigitated electrodes. The thick film samples were fired at two temperatures 600 and 800°C. The powder morphology was retained and only the organic compounds in the paste were burnt-out at 600°C, while at 800°C the thick film surface morphology was different where grain growth and individual particles can be observed. We measured complex impedance in a temperature and humidity chamber at room temperature (25°C) in the relative humidity range 30 – 90 % and frequency 100 Hz - 1 MHz. The thick film surface morphology has a significant influence on the effect of humidity on complex impedance. The complex impedance of thick films fired at 600°C was high and did not decrease noticeably with increase in relative humidity (RH), except for RH 80 and 90%, while thick film samples fired at 800°C had an overall lower impedance that reduced more noticeably with increase in RH 40–70% and even more for RH 80 and 90%.
PB  - IEEE
C3  - 2020 43rd International Spring Seminar on Electronics Technology (ISSE)
T1  - Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite
SP  - 1
EP  - 5
DO  - 10.1109/ISSE49702.2020.9120967
UR  - https://hdl.handle.net/21.15107/rcub_dais_8965
ER  - 

@conference{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Dojčinović, Milena P. and Vujančević, Jelena and Radovanović, Milan",
year = "2020",
abstract = "This work deals with our continued research of oxide materials for potential application in gas/humidity sensing. We have made thick film samples using iron manganite powder synthesized by a sol-gel combustion method with a net-like structure, by screen printing on alumina substrate with PdAg interdigitated electrodes. The thick film samples were fired at two temperatures 600 and 800°C. The powder morphology was retained and only the organic compounds in the paste were burnt-out at 600°C, while at 800°C the thick film surface morphology was different where grain growth and individual particles can be observed. We measured complex impedance in a temperature and humidity chamber at room temperature (25°C) in the relative humidity range 30 – 90 % and frequency 100 Hz - 1 MHz. The thick film surface morphology has a significant influence on the effect of humidity on complex impedance. The complex impedance of thick films fired at 600°C was high and did not decrease noticeably with increase in relative humidity (RH), except for RH 80 and 90%, while thick film samples fired at 800°C had an overall lower impedance that reduced more noticeably with increase in RH 40–70% and even more for RH 80 and 90%.",
publisher = "IEEE",
journal = "2020 43rd International Spring Seminar on Electronics Technology (ISSE)",
title = "Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite",
pages = "1-5",
doi = "10.1109/ISSE49702.2020.9120967",
url = "https://hdl.handle.net/21.15107/rcub_dais_8965"
}

Nikolić, M. V., Vasiljević, Z. Ž., Dojčinović, M. P., Vujančević, J.,& Radovanović, M.. (2020). Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite. in 2020 43rd International Spring Seminar on Electronics Technology (ISSE)
IEEE., 1-5.
https://doi.org/10.1109/ISSE49702.2020.9120967
https://hdl.handle.net/21.15107/rcub_dais_8965

Nikolić MV, Vasiljević ZŽ, Dojčinović MP, Vujančević J, Radovanović M. Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite. in 2020 43rd International Spring Seminar on Electronics Technology (ISSE). 2020;:1-5.
doi:10.1109/ISSE49702.2020.9120967
https://hdl.handle.net/21.15107/rcub_dais_8965 .

Nikolić, Maria Vesna, Vasiljević, Zorka Ž., Dojčinović, Milena P., Vujančević, Jelena, Radovanović, Milan, "Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite" in 2020 43rd International Spring Seminar on Electronics Technology (ISSE) (2020):1-5,
https://doi.org/10.1109/ISSE49702.2020.9120967 .,
https://hdl.handle.net/21.15107/rcub_dais_8965 .

TY  - CONF
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Radovanović, Milan
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10026
AB  - This work deals with our continued research of oxide materials for potential application in gas/humidity sensing. We have made thick film samples using iron manganite powder synthesized by a sol-gel combustion method with a net-like structure, by screen printing on alumina substrate with PdAg interdigitated electrodes. The thick film samples were fired at two temperatures 600 and 800°C. The powder morphology was retained and only the organic compounds in the paste were burnt-out at 600°C, while at 800°C the thick film surface morphology was different where grain growth and individual particles can be observed. We measured complex impedance in a temperature and humidity chamber at room temperature (25°C) in the relative humidity range 30 – 90 % and frequency 100 Hz - 1 MHz. The thick film surface morphology has a significant influence on the effect of humidity on complex impedance. The complex impedance of thick films fired at 600°C was high and did not decrease noticeably with increase in relative humidity (RH), except for RH 80 and 90%, while thick film samples fired at 800°C had an overall lower impedance that reduced more noticeably with increase in RH 40–70% and even more for RH 80 and 90%.
PB  - IEEE
C3  - 2020 43rd International Spring Seminar on Electronics Technology (ISSE)
T1  - Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite
SP  - 1
EP  - 5
DO  - 10.1109/ISSE49702.2020.9120967
UR  - https://hdl.handle.net/21.15107/rcub_dais_10026
ER  - 

@conference{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Radovanović, Milan",
year = "2020",
abstract = "This work deals with our continued research of oxide materials for potential application in gas/humidity sensing. We have made thick film samples using iron manganite powder synthesized by a sol-gel combustion method with a net-like structure, by screen printing on alumina substrate with PdAg interdigitated electrodes. The thick film samples were fired at two temperatures 600 and 800°C. The powder morphology was retained and only the organic compounds in the paste were burnt-out at 600°C, while at 800°C the thick film surface morphology was different where grain growth and individual particles can be observed. We measured complex impedance in a temperature and humidity chamber at room temperature (25°C) in the relative humidity range 30 – 90 % and frequency 100 Hz - 1 MHz. The thick film surface morphology has a significant influence on the effect of humidity on complex impedance. The complex impedance of thick films fired at 600°C was high and did not decrease noticeably with increase in relative humidity (RH), except for RH 80 and 90%, while thick film samples fired at 800°C had an overall lower impedance that reduced more noticeably with increase in RH 40–70% and even more for RH 80 and 90%.",
publisher = "IEEE",
journal = "2020 43rd International Spring Seminar on Electronics Technology (ISSE)",
title = "Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite",
pages = "1-5",
doi = "10.1109/ISSE49702.2020.9120967",
url = "https://hdl.handle.net/21.15107/rcub_dais_10026"
}

Nikolić, M. V., Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J.,& Radovanović, M.. (2020). Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite. in 2020 43rd International Spring Seminar on Electronics Technology (ISSE)
IEEE., 1-5.
https://doi.org/10.1109/ISSE49702.2020.9120967
https://hdl.handle.net/21.15107/rcub_dais_10026

Nikolić MV, Vasiljević ZŽ, Dojčinović M, Vujančević J, Radovanović M. Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite. in 2020 43rd International Spring Seminar on Electronics Technology (ISSE). 2020;:1-5.
doi:10.1109/ISSE49702.2020.9120967
https://hdl.handle.net/21.15107/rcub_dais_10026 .

Nikolić, Maria Vesna, Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Radovanović, Milan, "Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite" in 2020 43rd International Spring Seminar on Electronics Technology (ISSE) (2020):1-5,
https://doi.org/10.1109/ISSE49702.2020.9120967 .,
https://hdl.handle.net/21.15107/rcub_dais_10026 .