Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM)

Link to this page

info:eu-repo/grantAgreement/MESTD/inst-2020/200026/RS//

Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM) (en)
Ministarstvo prosvete, nauke i tehnološkog razvoja Republike Srbije, Ugovor br. 451-03-68/2020-14/200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (sr_RS)
Министарство просвете, науке и технолошког развоја Републике Србије, Уговор бр. 451-03-68/2020-14/200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (sr)
Authors

Publications

A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells

Lović, Jelena; Eraković Pantović, Sanja; Rakočević, Lazar; Ignjatović, Nenad; Dimitrijević, Silvana B.; Nikolić, Nebojša D.

(2023)

TY  - JOUR
AU  - Lović, Jelena
AU  - Eraković Pantović, Sanja
AU  - Rakočević, Lazar
AU  - Ignjatović, Nenad
AU  - Dimitrijević, Silvana B.
AU  - Nikolić, Nebojša D.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/13684
AB  - Sn-Pd electrocatalysts with a constant atomic ratio of 60 at.% Sn‒40 at.% Pd suitable for potential application in direct ethanol fuel cells were synthesized using a novel two-step electrodeposition method. First, Sn was electrodeposited in various forms of dendrites, from spear-like and needle-like to individual fern-like dendrites to a network of intertwined fern-like dendrites, by varying the cathodic potential and then performing electrodeposition of Pd at a constant current density in the second step. A morphological and elemental analysis of Sn and Sn-Pd electrocatalysts was performed using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) techniques, while the size of Sn dendrites was analyzed using the particle size distribution (PSD) method. Cyclic voltammetry (CV) and chronoamperometry were applied in order to study the catalytic behavior of Sn-Pd electrocatalysts in the ethanol oxidation reaction (EOR), while CO stripping was used to estimate the antipoisoning capability of the electrocatalysts. The Sn surface morphology of the sub-layer was highly correlated with the electrocatalytic activity of the examined Sn-Pd electrocatalysts. The high activity it presented towards the EOR showed the suitability of the Sn-Pd electrocatalyst constructed from individual fern-like Sn dendrites as a sub-layer. Compared to Pd alone, this Sn-Pd catalyst showed more than 3 times higher activity and improved EOR kinetics. This enhancement in the catalytic activity of the Sn-Pd electrocatalysts is attributed to both the morphological characteristics of Sn as a sub-layer and the bifunctional effect.
T2  - Processes
T1  - A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells
SP  - 120
VL  - 11
IS  - 1
DO  - 10.3390/pr11010120
UR  - https://hdl.handle.net/21.15107/rcub_dais_13684
ER  - 
@article{
author = "Lović, Jelena and Eraković Pantović, Sanja and Rakočević, Lazar and Ignjatović, Nenad and Dimitrijević, Silvana B. and Nikolić, Nebojša D.",
year = "2023",
abstract = "Sn-Pd electrocatalysts with a constant atomic ratio of 60 at.% Sn‒40 at.% Pd suitable for potential application in direct ethanol fuel cells were synthesized using a novel two-step electrodeposition method. First, Sn was electrodeposited in various forms of dendrites, from spear-like and needle-like to individual fern-like dendrites to a network of intertwined fern-like dendrites, by varying the cathodic potential and then performing electrodeposition of Pd at a constant current density in the second step. A morphological and elemental analysis of Sn and Sn-Pd electrocatalysts was performed using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) techniques, while the size of Sn dendrites was analyzed using the particle size distribution (PSD) method. Cyclic voltammetry (CV) and chronoamperometry were applied in order to study the catalytic behavior of Sn-Pd electrocatalysts in the ethanol oxidation reaction (EOR), while CO stripping was used to estimate the antipoisoning capability of the electrocatalysts. The Sn surface morphology of the sub-layer was highly correlated with the electrocatalytic activity of the examined Sn-Pd electrocatalysts. The high activity it presented towards the EOR showed the suitability of the Sn-Pd electrocatalyst constructed from individual fern-like Sn dendrites as a sub-layer. Compared to Pd alone, this Sn-Pd catalyst showed more than 3 times higher activity and improved EOR kinetics. This enhancement in the catalytic activity of the Sn-Pd electrocatalysts is attributed to both the morphological characteristics of Sn as a sub-layer and the bifunctional effect.",
journal = "Processes",
title = "A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells",
pages = "120",
volume = "11",
number = "1",
doi = "10.3390/pr11010120",
url = "https://hdl.handle.net/21.15107/rcub_dais_13684"
}
Lović, J., Eraković Pantović, S., Rakočević, L., Ignjatović, N., Dimitrijević, S. B.,& Nikolić, N. D.. (2023). A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells. in Processes, 11(1), 120.
https://doi.org/10.3390/pr11010120
https://hdl.handle.net/21.15107/rcub_dais_13684
Lović J, Eraković Pantović S, Rakočević L, Ignjatović N, Dimitrijević SB, Nikolić ND. A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells. in Processes. 2023;11(1):120.
doi:10.3390/pr11010120
https://hdl.handle.net/21.15107/rcub_dais_13684 .
Lović, Jelena, Eraković Pantović, Sanja, Rakočević, Lazar, Ignjatović, Nenad, Dimitrijević, Silvana B., Nikolić, Nebojša D., "A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells" in Processes, 11, no. 1 (2023):120,
https://doi.org/10.3390/pr11010120 .,
https://hdl.handle.net/21.15107/rcub_dais_13684 .
2

Influence of Morphology of Sn Dendrites as Sub-layer on Electrolcatalytic Performance of Sn-Pd Electrocatalysts

Nikolić, Nebojša D.; Lović, Jelena; Ignjatović, Nenad; Dimitrijević, Silvana B.

(Lausanne : International Society of Electrochemistry, 2023)

TY  - CONF
AU  - Nikolić, Nebojša D.
AU  - Lović, Jelena
AU  - Ignjatović, Nenad
AU  - Dimitrijević, Silvana B.
PY  - 2023
UR  - https://annual74.ise-online.org
UR  - https://dais.sanu.ac.rs/123456789/15643
AB  - Sn-Pd electrocatalysts convenient for a possible application in direct ethanol fuel cell were produced by two electrochemical deposition method. In the first step, Sn dendrites of various degree of ramification were electrodeposited by potentiostatically on cathodic potentials of –1200, –1400, –1600 and –1800 mV vs. Ag/AgCl. Electrodeposition of tin was performed from 20 g/l SnCl2 × 2H2O in 250 g/l NaOH electrolyte [1] at the room temperature on Cu electrodes. In the second step, Pd was electrodeposited galvanostatically at a current density of –5 mA cm-2 on the electrodes with electrodeposited Sn dendrites. Electrodeposition of Pd was performed from 1 M NH4Cl and 0.01 M PdCl2 at the room temperature [2]. The processes of electrochemical deposition of Sn and Pd were performed with amounts of the electricity of 400 and 267 mC, giving an atomic ratio synthesized the electrocatalysts of 60 at.% Sn‒40 at.% Pd. Morpological and elemental analysis of the Sn-Pd electrocatalysts was performed by scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The particle size distribution (PSD) was used to estimate a size of Sn dendrites. The electrocatalytic activity of synthesized Sn-Pd electrocatalysts towards ethanol oxidation reaction (EOR) was examined by cyclic voltammetry (CV) and chronoamperometry, using 1 M NaOH with 1 M ethanol solution. Depending on the applied cathodic potentials, the following shapes of dendrites were formed: the needle-like and the spear-like at –1200 mV, an individual fern-like dendrites at –1400 mV, and intertwined network of dendrites of the fern-like shape was formed at cathodic potentials of – 1600 and – 1800 mV vs. Ag/AgCl. The partial coverage of the Sn dendrites through a formation of compact islands of Pd was attained by electrodeposition of Pd on the electrodes with the Sn dendrites. It was shown that morphology of the Sn dendrites as sub-layer strongly correlates the electrocatalytic activity of the Sn-Pd electrocatalysts. The largest electrocatalytic activity showed the Sn- Pd electrocatalyst constructed from the individual fern-like Sn dendrites as sub-layer produced at a cathodic potential of –1400 mV vs. Ag/AgCl. This dendrite type showed more branchy morphology than those obtained at the other cathodic potentials. Formation of individual needle-like and spear-like dendrites at a cathodic potential of – 1200 mV vs. Ag/AgCl did not contribute significantly to the increase of the initial electrode surface area. On the other hand, due to a high nucleation rate, growth a dendrites from one nucleation centre in more directions, as well as the fact that Sn is very soft metal, morphological characteristics of intertwined Sn dendrites obtained at cathodic potentials of −1600 and −1800 mV vs. Ag/AgCl approached to those of compact massive Sn. The partial coverage of Sn dendrites by Pd can be attributed to the current density distribution effect, because Pd electrodeposition process preferentially perfomed at the higher parts of the surface area, i.e. on the dendrites, rather than on the flat part of the electrode surface area. Aside from an influence of degree of branchy of Sn dendrites as sub-layer on the electrocatalytic activity in ethanol oxidation, varios electrocatalytic performance of the Sn-Pd electrocatalysts can also be ascribed to the bifunctional effect.
PB  - Lausanne : International Society of Electrochemistry
C3  - The 74th Annual Meeting of the International Society of Electrochemistry : Bridging Scientific Disciplines to Address the World’s Challenges 3 to 8 September 2023. Lyon, France
T1  - Influence of Morphology of Sn Dendrites as Sub-layer on Electrolcatalytic Performance of Sn-Pd Electrocatalysts
UR  - https://hdl.handle.net/21.15107/rcub_dais_15643
ER  - 
@conference{
author = "Nikolić, Nebojša D. and Lović, Jelena and Ignjatović, Nenad and Dimitrijević, Silvana B.",
year = "2023",
abstract = "Sn-Pd electrocatalysts convenient for a possible application in direct ethanol fuel cell were produced by two electrochemical deposition method. In the first step, Sn dendrites of various degree of ramification were electrodeposited by potentiostatically on cathodic potentials of –1200, –1400, –1600 and –1800 mV vs. Ag/AgCl. Electrodeposition of tin was performed from 20 g/l SnCl2 × 2H2O in 250 g/l NaOH electrolyte [1] at the room temperature on Cu electrodes. In the second step, Pd was electrodeposited galvanostatically at a current density of –5 mA cm-2 on the electrodes with electrodeposited Sn dendrites. Electrodeposition of Pd was performed from 1 M NH4Cl and 0.01 M PdCl2 at the room temperature [2]. The processes of electrochemical deposition of Sn and Pd were performed with amounts of the electricity of 400 and 267 mC, giving an atomic ratio synthesized the electrocatalysts of 60 at.% Sn‒40 at.% Pd. Morpological and elemental analysis of the Sn-Pd electrocatalysts was performed by scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The particle size distribution (PSD) was used to estimate a size of Sn dendrites. The electrocatalytic activity of synthesized Sn-Pd electrocatalysts towards ethanol oxidation reaction (EOR) was examined by cyclic voltammetry (CV) and chronoamperometry, using 1 M NaOH with 1 M ethanol solution. Depending on the applied cathodic potentials, the following shapes of dendrites were formed: the needle-like and the spear-like at –1200 mV, an individual fern-like dendrites at –1400 mV, and intertwined network of dendrites of the fern-like shape was formed at cathodic potentials of – 1600 and – 1800 mV vs. Ag/AgCl. The partial coverage of the Sn dendrites through a formation of compact islands of Pd was attained by electrodeposition of Pd on the electrodes with the Sn dendrites. It was shown that morphology of the Sn dendrites as sub-layer strongly correlates the electrocatalytic activity of the Sn-Pd electrocatalysts. The largest electrocatalytic activity showed the Sn- Pd electrocatalyst constructed from the individual fern-like Sn dendrites as sub-layer produced at a cathodic potential of –1400 mV vs. Ag/AgCl. This dendrite type showed more branchy morphology than those obtained at the other cathodic potentials. Formation of individual needle-like and spear-like dendrites at a cathodic potential of – 1200 mV vs. Ag/AgCl did not contribute significantly to the increase of the initial electrode surface area. On the other hand, due to a high nucleation rate, growth a dendrites from one nucleation centre in more directions, as well as the fact that Sn is very soft metal, morphological characteristics of intertwined Sn dendrites obtained at cathodic potentials of −1600 and −1800 mV vs. Ag/AgCl approached to those of compact massive Sn. The partial coverage of Sn dendrites by Pd can be attributed to the current density distribution effect, because Pd electrodeposition process preferentially perfomed at the higher parts of the surface area, i.e. on the dendrites, rather than on the flat part of the electrode surface area. Aside from an influence of degree of branchy of Sn dendrites as sub-layer on the electrocatalytic activity in ethanol oxidation, varios electrocatalytic performance of the Sn-Pd electrocatalysts can also be ascribed to the bifunctional effect.",
publisher = "Lausanne : International Society of Electrochemistry",
journal = "The 74th Annual Meeting of the International Society of Electrochemistry : Bridging Scientific Disciplines to Address the World’s Challenges 3 to 8 September 2023. Lyon, France",
title = "Influence of Morphology of Sn Dendrites as Sub-layer on Electrolcatalytic Performance of Sn-Pd Electrocatalysts",
url = "https://hdl.handle.net/21.15107/rcub_dais_15643"
}
Nikolić, N. D., Lović, J., Ignjatović, N.,& Dimitrijević, S. B.. (2023). Influence of Morphology of Sn Dendrites as Sub-layer on Electrolcatalytic Performance of Sn-Pd Electrocatalysts. in The 74th Annual Meeting of the International Society of Electrochemistry : Bridging Scientific Disciplines to Address the World’s Challenges 3 to 8 September 2023. Lyon, France
Lausanne : International Society of Electrochemistry..
https://hdl.handle.net/21.15107/rcub_dais_15643
Nikolić ND, Lović J, Ignjatović N, Dimitrijević SB. Influence of Morphology of Sn Dendrites as Sub-layer on Electrolcatalytic Performance of Sn-Pd Electrocatalysts. in The 74th Annual Meeting of the International Society of Electrochemistry : Bridging Scientific Disciplines to Address the World’s Challenges 3 to 8 September 2023. Lyon, France. 2023;.
https://hdl.handle.net/21.15107/rcub_dais_15643 .
Nikolić, Nebojša D., Lović, Jelena, Ignjatović, Nenad, Dimitrijević, Silvana B., "Influence of Morphology of Sn Dendrites as Sub-layer on Electrolcatalytic Performance of Sn-Pd Electrocatalysts" in The 74th Annual Meeting of the International Society of Electrochemistry : Bridging Scientific Disciplines to Address the World’s Challenges 3 to 8 September 2023. Lyon, France (2023),
https://hdl.handle.net/21.15107/rcub_dais_15643 .

Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants

Pantović-Pavlović, Marijana R.; Ignjatović, Nenad; Panić, Vladimir V.; Mirkov, Ivana I.; Kulaš, Jelena B.; Malešević, Anastasija Lj.; Pavlović, Miroslav M.

(Basel : MDPI AG, 2023)

TY  - JOUR
AU  - Pantović-Pavlović, Marijana R.
AU  - Ignjatović, Nenad
AU  - Panić, Vladimir V.
AU  - Mirkov, Ivana I.
AU  - Kulaš, Jelena B.
AU  - Malešević, Anastasija Lj.
AU  - Pavlović, Miroslav M.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14406
AB  - The aim of this work is in situ anodization/anaphoretic deposition of a nano amorphous calcium phosphate (ACP)/chitosan oligosaccharide lactate (ChOL) multifunctional hybrid coating decorated with selenium (Se) on a titanium substrate and in vivo investigation of its immunomodulatory and anti-inflammatory effect. Investigating phenomena at the implant–tissue interface of interest for controlled inflammation and immunomodulation was also the aim of the research. In our earlier research, we designed coatings based on ACP and ChOL on titanium with anticorrosive, antibacterial and biocompatible properties, while in the presented results we show that selenium addition makes this coating an immunomodulator. The immunomodulatory effect of the novel hybrid coating is characterized by the examination of the functional aspects in the tissue around the implant (in vivo): proinflammatory cytokines’ gene expression, M1 (iNOS) and M2 (Arg1) macrophages, fibrous capsule formation (TGF-β) and vascularization (VEGF). The EDS, FTIR and XRD analyses prove the formation of a ACP/ChOL/Se multifunctional hybrid coating on Ti and the presence of Se. A higher M2/M1 macrophage ratio in the ACP/ChOL/Se-coated implants compared to pure titanium implants (a higher level of Arg1 expression) is noted at all time points examined (after 7, 14 and 28 days). Lower inflammation measured by gene expression of proinflammatory cytokines IL-1β and TNF, lower expression of TGF-β in the surrounding tissue and higher IL-6 expression (solely at day 7 post-implantation) is noted in presence of the ACP/ChOL/Se-coated implants.
PB  - Basel : MDPI AG
T2  - Journal of Functional Biomaterials
T1  - Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants
SP  - 227
VL  - 14
IS  - 4
DO  - 10.3390/jfb14040227
UR  - https://hdl.handle.net/21.15107/rcub_dais_14406
ER  - 
@article{
author = "Pantović-Pavlović, Marijana R. and Ignjatović, Nenad and Panić, Vladimir V. and Mirkov, Ivana I. and Kulaš, Jelena B. and Malešević, Anastasija Lj. and Pavlović, Miroslav M.",
year = "2023",
abstract = "The aim of this work is in situ anodization/anaphoretic deposition of a nano amorphous calcium phosphate (ACP)/chitosan oligosaccharide lactate (ChOL) multifunctional hybrid coating decorated with selenium (Se) on a titanium substrate and in vivo investigation of its immunomodulatory and anti-inflammatory effect. Investigating phenomena at the implant–tissue interface of interest for controlled inflammation and immunomodulation was also the aim of the research. In our earlier research, we designed coatings based on ACP and ChOL on titanium with anticorrosive, antibacterial and biocompatible properties, while in the presented results we show that selenium addition makes this coating an immunomodulator. The immunomodulatory effect of the novel hybrid coating is characterized by the examination of the functional aspects in the tissue around the implant (in vivo): proinflammatory cytokines’ gene expression, M1 (iNOS) and M2 (Arg1) macrophages, fibrous capsule formation (TGF-β) and vascularization (VEGF). The EDS, FTIR and XRD analyses prove the formation of a ACP/ChOL/Se multifunctional hybrid coating on Ti and the presence of Se. A higher M2/M1 macrophage ratio in the ACP/ChOL/Se-coated implants compared to pure titanium implants (a higher level of Arg1 expression) is noted at all time points examined (after 7, 14 and 28 days). Lower inflammation measured by gene expression of proinflammatory cytokines IL-1β and TNF, lower expression of TGF-β in the surrounding tissue and higher IL-6 expression (solely at day 7 post-implantation) is noted in presence of the ACP/ChOL/Se-coated implants.",
publisher = "Basel : MDPI AG",
journal = "Journal of Functional Biomaterials",
title = "Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants",
pages = "227",
volume = "14",
number = "4",
doi = "10.3390/jfb14040227",
url = "https://hdl.handle.net/21.15107/rcub_dais_14406"
}
Pantović-Pavlović, M. R., Ignjatović, N., Panić, V. V., Mirkov, I. I., Kulaš, J. B., Malešević, A. Lj.,& Pavlović, M. M.. (2023). Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants. in Journal of Functional Biomaterials
Basel : MDPI AG., 14(4), 227.
https://doi.org/10.3390/jfb14040227
https://hdl.handle.net/21.15107/rcub_dais_14406
Pantović-Pavlović MR, Ignjatović N, Panić VV, Mirkov II, Kulaš JB, Malešević AL, Pavlović MM. Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants. in Journal of Functional Biomaterials. 2023;14(4):227.
doi:10.3390/jfb14040227
https://hdl.handle.net/21.15107/rcub_dais_14406 .
Pantović-Pavlović, Marijana R., Ignjatović, Nenad, Panić, Vladimir V., Mirkov, Ivana I., Kulaš, Jelena B., Malešević, Anastasija Lj., Pavlović, Miroslav M., "Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants" in Journal of Functional Biomaterials, 14, no. 4 (2023):227,
https://doi.org/10.3390/jfb14040227 .,
https://hdl.handle.net/21.15107/rcub_dais_14406 .
2
2

The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes

Pagnacco, Maja; Marković, Smilja; Potočnik, Jelena; Krstić, Vesna; Tančić, Pavle; Mojović, Miloš; Mojović, Zorica

(Elsevier, 2022)

TY  - JOUR
AU  - Pagnacco, Maja
AU  - Marković, Smilja
AU  - Potočnik, Jelena
AU  - Krstić, Vesna
AU  - Tančić, Pavle
AU  - Mojović, Miloš
AU  - Mojović, Zorica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13493
AB  - Phosphate tungsten bronze (WPB) and phosphate molybdenum bronze (MoPB) were synthesized and modified with rhenium. The existing phases were established by X-ray powder diffraction (XRPD), electron paramagnetic spectroscopy (EPR) and Field emission scanning electron microscopy (FESEM). The electroactivity of bronze samples, with and without rhenium for hydrogen evolution reaction (HER) was tested. The influence of carbon black presence in the catalytic ink on the electrochemical activity was investigated. Collected results provide insight into the effects of the constituents of an electrode on its electrochemical activity.
PB  - Elsevier
T2  - Journal of Electrochemical Society
T1  - The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes
SP  - 106508
VL  - 169
IS  - 10
DO  - 10.1149/1945-7111/ac96ab
UR  - https://hdl.handle.net/21.15107/rcub_dais_13493
ER  - 
@article{
author = "Pagnacco, Maja and Marković, Smilja and Potočnik, Jelena and Krstić, Vesna and Tančić, Pavle and Mojović, Miloš and Mojović, Zorica",
year = "2022",
abstract = "Phosphate tungsten bronze (WPB) and phosphate molybdenum bronze (MoPB) were synthesized and modified with rhenium. The existing phases were established by X-ray powder diffraction (XRPD), electron paramagnetic spectroscopy (EPR) and Field emission scanning electron microscopy (FESEM). The electroactivity of bronze samples, with and without rhenium for hydrogen evolution reaction (HER) was tested. The influence of carbon black presence in the catalytic ink on the electrochemical activity was investigated. Collected results provide insight into the effects of the constituents of an electrode on its electrochemical activity.",
publisher = "Elsevier",
journal = "Journal of Electrochemical Society",
title = "The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes",
pages = "106508",
volume = "169",
number = "10",
doi = "10.1149/1945-7111/ac96ab",
url = "https://hdl.handle.net/21.15107/rcub_dais_13493"
}
Pagnacco, M., Marković, S., Potočnik, J., Krstić, V., Tančić, P., Mojović, M.,& Mojović, Z.. (2022). The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes. in Journal of Electrochemical Society
Elsevier., 169(10), 106508.
https://doi.org/10.1149/1945-7111/ac96ab
https://hdl.handle.net/21.15107/rcub_dais_13493
Pagnacco M, Marković S, Potočnik J, Krstić V, Tančić P, Mojović M, Mojović Z. The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes. in Journal of Electrochemical Society. 2022;169(10):106508.
doi:10.1149/1945-7111/ac96ab
https://hdl.handle.net/21.15107/rcub_dais_13493 .
Pagnacco, Maja, Marković, Smilja, Potočnik, Jelena, Krstić, Vesna, Tančić, Pavle, Mojović, Miloš, Mojović, Zorica, "The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes" in Journal of Electrochemical Society, 169, no. 10 (2022):106508,
https://doi.org/10.1149/1945-7111/ac96ab .,
https://hdl.handle.net/21.15107/rcub_dais_13493 .
1
1

Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent

Popović, Mina; Veličković, Zlate S.; Bogdanov, Jovica; Marinković, Aleksandar D.; Luna, Mariano Casas; Trajković, Isaak; Obradović, Nina; Pavlović, Vladimir B.

(International Institute for the Science of Sintering (IISS), 2022)

TY  - JOUR
AU  - Popović, Mina
AU  - Veličković, Zlate S.
AU  - Bogdanov, Jovica
AU  - Marinković, Aleksandar D.
AU  - Luna, Mariano Casas
AU  - Trajković, Isaak
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/12955
AB  - In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were studied. Magnetite (MG) modified 3D printed wollastonite was obtained by two step procedure: modification of 3D_W with 3-aminoproylsilane (APTES) followed by controlled magnetite (MG) deposition to obtain 3D_W/M adsorbent. The structure/properties of 3D_W/M were confirmed by applying FTIR, XRD, TGD/DTA, and SEM analysis. The adsorption properties of hybrid adsorbents were carried out for As(V) and Cr(VI) removal-one relative to the initial pH value, the adsorbent mass, the temperature, and the adsorption time. Time-dependent adsorption study was best described by pseudo-second order equation, while Weber Morris analysis showed that intraparticle diffusion controled diffusional transport. Similar activation energy, 17.44 and 14.49 kJ•mol-1 for adsorption As(V) and Cr(VI) on 3D_W/M, respectively, indicated main contribution of physical adsorption. Determination of adsorption parameters was performed by applying different adsorption isotherm models, and the best fit was obtained using Freundlich model. The adsorption capacity of 24.16 and 29.6 mg g-1 for As(V) and Cr(VI) at 2o C, Co = 5.5 and 5.3 mg L-1, respectively, were obtained. Thermodynamic study indicated favourable process at a higher temperature. Preliminary fixed-bed column study and results fitting with Bohart-Adams, Yoon-Nelson, Thomas, and Modified dose-response model showed good agreement with results from the batch study.
PB  - International Institute for the Science of Sintering (IISS)
T2  - Science of Sintering
T1  - Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
SP  - 105
EP  - 124
VL  - 54
IS  - 1
DO  - 10.2298/SOS2201105P
UR  - https://hdl.handle.net/21.15107/rcub_dais_12955
ER  - 
@article{
author = "Popović, Mina and Veličković, Zlate S. and Bogdanov, Jovica and Marinković, Aleksandar D. and Luna, Mariano Casas and Trajković, Isaak and Obradović, Nina and Pavlović, Vladimir B.",
year = "2022",
abstract = "In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were studied. Magnetite (MG) modified 3D printed wollastonite was obtained by two step procedure: modification of 3D_W with 3-aminoproylsilane (APTES) followed by controlled magnetite (MG) deposition to obtain 3D_W/M adsorbent. The structure/properties of 3D_W/M were confirmed by applying FTIR, XRD, TGD/DTA, and SEM analysis. The adsorption properties of hybrid adsorbents were carried out for As(V) and Cr(VI) removal-one relative to the initial pH value, the adsorbent mass, the temperature, and the adsorption time. Time-dependent adsorption study was best described by pseudo-second order equation, while Weber Morris analysis showed that intraparticle diffusion controled diffusional transport. Similar activation energy, 17.44 and 14.49 kJ•mol-1 for adsorption As(V) and Cr(VI) on 3D_W/M, respectively, indicated main contribution of physical adsorption. Determination of adsorption parameters was performed by applying different adsorption isotherm models, and the best fit was obtained using Freundlich model. The adsorption capacity of 24.16 and 29.6 mg g-1 for As(V) and Cr(VI) at 2o C, Co = 5.5 and 5.3 mg L-1, respectively, were obtained. Thermodynamic study indicated favourable process at a higher temperature. Preliminary fixed-bed column study and results fitting with Bohart-Adams, Yoon-Nelson, Thomas, and Modified dose-response model showed good agreement with results from the batch study.",
publisher = "International Institute for the Science of Sintering (IISS)",
journal = "Science of Sintering",
title = "Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent",
pages = "105-124",
volume = "54",
number = "1",
doi = "10.2298/SOS2201105P",
url = "https://hdl.handle.net/21.15107/rcub_dais_12955"
}
Popović, M., Veličković, Z. S., Bogdanov, J., Marinković, A. D., Luna, M. C., Trajković, I., Obradović, N.,& Pavlović, V. B.. (2022). Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent. in Science of Sintering
International Institute for the Science of Sintering (IISS)., 54(1), 105-124.
https://doi.org/10.2298/SOS2201105P
https://hdl.handle.net/21.15107/rcub_dais_12955
Popović M, Veličković ZS, Bogdanov J, Marinković AD, Luna MC, Trajković I, Obradović N, Pavlović VB. Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent. in Science of Sintering. 2022;54(1):105-124.
doi:10.2298/SOS2201105P
https://hdl.handle.net/21.15107/rcub_dais_12955 .
Popović, Mina, Veličković, Zlate S., Bogdanov, Jovica, Marinković, Aleksandar D., Luna, Mariano Casas, Trajković, Isaak, Obradović, Nina, Pavlović, Vladimir B., "Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent" in Science of Sintering, 54, no. 1 (2022):105-124,
https://doi.org/10.2298/SOS2201105P .,
https://hdl.handle.net/21.15107/rcub_dais_12955 .
3
2

Supplementary information for the article Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614

Jonović, Marko; Jugović, Branimir; Žuža, Milena; Đorđević, Verica; Milašinović, Nikola; Bugarski, Branko; Knežević-Jugović, Zorica

(MDPI AG, 2022)

TY  - DATA
AU  - Jonović, Marko
AU  - Jugović, Branimir
AU  - Žuža, Milena
AU  - Đorđević, Verica
AU  - Milašinović, Nikola
AU  - Bugarski, Branko
AU  - Knežević-Jugović, Zorica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13156
AB  - Figure S1: Effects on the decolorization process: HRP-MAB size (a) AB225, (b) AV109; MAG-alginate ratio (c) AB225, (d) AV109; initial HRP concentration (e) AB225, (f) AV109; HRP-MAB mass (g) AB225, (h) AV109; initial H2O2 concentration (i) AB225, (j) AV109 and initial dye concentration (k) AB225, (l) AV109; Table S1: Reaction conditions for the optimization of decolorization process of AB225 and AV109 color
PB  - MDPI AG
T2  - Polymers
T1  - Supplementary information for the article Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614
VL  - 14
UR  - https://hdl.handle.net/21.15107/rcub_dais_13156
ER  - 
@misc{
author = "Jonović, Marko and Jugović, Branimir and Žuža, Milena and Đorđević, Verica and Milašinović, Nikola and Bugarski, Branko and Knežević-Jugović, Zorica",
year = "2022",
abstract = "Figure S1: Effects on the decolorization process: HRP-MAB size (a) AB225, (b) AV109; MAG-alginate ratio (c) AB225, (d) AV109; initial HRP concentration (e) AB225, (f) AV109; HRP-MAB mass (g) AB225, (h) AV109; initial H2O2 concentration (i) AB225, (j) AV109 and initial dye concentration (k) AB225, (l) AV109; Table S1: Reaction conditions for the optimization of decolorization process of AB225 and AV109 color",
publisher = "MDPI AG",
journal = "Polymers",
title = "Supplementary information for the article Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614",
volume = "14",
url = "https://hdl.handle.net/21.15107/rcub_dais_13156"
}
Jonović, M., Jugović, B., Žuža, M., Đorđević, V., Milašinović, N., Bugarski, B.,& Knežević-Jugović, Z.. (2022). Supplementary information for the article Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614. in Polymers
MDPI AG., 14.
https://hdl.handle.net/21.15107/rcub_dais_13156
Jonović M, Jugović B, Žuža M, Đorđević V, Milašinović N, Bugarski B, Knežević-Jugović Z. Supplementary information for the article Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614. in Polymers. 2022;14.
https://hdl.handle.net/21.15107/rcub_dais_13156 .
Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Supplementary information for the article Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614" in Polymers, 14 (2022),
https://hdl.handle.net/21.15107/rcub_dais_13156 .

Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation

Jonović, Marko; Jugović, Branimir; Žuža, Milena; Đorđević, Verica; Milašinović, Nikola; Bugarski, Branko; Knežević-Jugović, Zorica

(MDPI AG, 2022)

TY  - JOUR
AU  - Jonović, Marko
AU  - Jugović, Branimir
AU  - Žuža, Milena
AU  - Đorđević, Verica
AU  - Milašinović, Nikola
AU  - Bugarski, Branko
AU  - Knežević-Jugović, Zorica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13155
AB  - The aim of this study was to investigate covalent immobilization of horseradish peroxidase (HRP) on magnetic nanoparticles (Mag) encapsulated in calcium alginate beads (MABs) for color degradation, combining easy and fast removal of biocatalyst from the reaction mixture due to its magnetic properties and strong binding due to surface alginate functional groups. MABs obtained by extrusion techniques were analyzed by optical microscopy, FEG-SEM and characterized regarding mechanical properties, magnetization and HRP binding. HRP with initial concentration of 10 mg/gcarrier was successfully covalently bonded on MABs (diameter ~1 mm, magnetite/alginate ratio 1:4), with protein loading of 8.9 mg/gcarrier, immobilization yield 96.9% and activity 32.8 U/g. Immobilized HRP on MABs (HRP-MABs) was then used to catalyze degradation of two anthraquinonic dyes, Acid Blue 225 (AB225) and Acid Violet 109 (AV109), as models for wastewater pollutants. HRP-MABs decolorized 77.3% and 76.1% of AV109 and AB225, respectively after 15 min under optimal conditions (0.097 mM H2O2, 200 mg of HRP-MABs (8.9 mg/gcarrier), 0.08 and 0.1 g/mg beads/dye ratio for AV109 and AB225, respectively). Biocatalyst was used for 7 repeated cycles retaining 75% and 51% of initial activity for AB225 and AV109, respectively, showing potential for use in large scale applications for colored wastewater treatment.
PB  - MDPI AG
T2  - Polymers
T1  - Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation
SP  - 2614
VL  - 14
IS  - 13
DO  - 10.3390/polym14132614
UR  - https://hdl.handle.net/21.15107/rcub_dais_13155
ER  - 
@article{
author = "Jonović, Marko and Jugović, Branimir and Žuža, Milena and Đorđević, Verica and Milašinović, Nikola and Bugarski, Branko and Knežević-Jugović, Zorica",
year = "2022",
abstract = "The aim of this study was to investigate covalent immobilization of horseradish peroxidase (HRP) on magnetic nanoparticles (Mag) encapsulated in calcium alginate beads (MABs) for color degradation, combining easy and fast removal of biocatalyst from the reaction mixture due to its magnetic properties and strong binding due to surface alginate functional groups. MABs obtained by extrusion techniques were analyzed by optical microscopy, FEG-SEM and characterized regarding mechanical properties, magnetization and HRP binding. HRP with initial concentration of 10 mg/gcarrier was successfully covalently bonded on MABs (diameter ~1 mm, magnetite/alginate ratio 1:4), with protein loading of 8.9 mg/gcarrier, immobilization yield 96.9% and activity 32.8 U/g. Immobilized HRP on MABs (HRP-MABs) was then used to catalyze degradation of two anthraquinonic dyes, Acid Blue 225 (AB225) and Acid Violet 109 (AV109), as models for wastewater pollutants. HRP-MABs decolorized 77.3% and 76.1% of AV109 and AB225, respectively after 15 min under optimal conditions (0.097 mM H2O2, 200 mg of HRP-MABs (8.9 mg/gcarrier), 0.08 and 0.1 g/mg beads/dye ratio for AV109 and AB225, respectively). Biocatalyst was used for 7 repeated cycles retaining 75% and 51% of initial activity for AB225 and AV109, respectively, showing potential for use in large scale applications for colored wastewater treatment.",
publisher = "MDPI AG",
journal = "Polymers",
title = "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation",
pages = "2614",
volume = "14",
number = "13",
doi = "10.3390/polym14132614",
url = "https://hdl.handle.net/21.15107/rcub_dais_13155"
}
Jonović, M., Jugović, B., Žuža, M., Đorđević, V., Milašinović, N., Bugarski, B.,& Knežević-Jugović, Z.. (2022). Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation. in Polymers
MDPI AG., 14(13), 2614.
https://doi.org/10.3390/polym14132614
https://hdl.handle.net/21.15107/rcub_dais_13155
Jonović M, Jugović B, Žuža M, Đorđević V, Milašinović N, Bugarski B, Knežević-Jugović Z. Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation. in Polymers. 2022;14(13):2614.
doi:10.3390/polym14132614
https://hdl.handle.net/21.15107/rcub_dais_13155 .
Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614,
https://doi.org/10.3390/polym14132614 .,
https://hdl.handle.net/21.15107/rcub_dais_13155 .
6
6

Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash

Miladinović, Marija M.; Krstić, Jugoslav B.; Zdujić, Miodrag V.; Veselinović, Ljiljana M.; Veljović, Đorđe N.; Banković-Ilić, Ivana B.; Stamenković, Olivera S.; Veljković, Vlada B.

(Elsevier, 2022)

TY  - JOUR
AU  - Miladinović, Marija M.
AU  - Krstić, Jugoslav B.
AU  - Zdujić, Miodrag V.
AU  - Veselinović, Ljiljana M.
AU  - Veljović, Đorđe N.
AU  - Banković-Ilić, Ivana B.
AU  - Stamenković, Olivera S.
AU  - Veljković, Vlada B.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/12337
AB  - Hazelnut shell ash was investigated as a new base catalyst for the transesterification of used cooking sunflower oil to biodiesel. To understand its catalytic properties, the prepared ash was characterized by EDX, XRD, TGA/DTA, Hg porosimetry, N2 physisorption, FE-SEM, and basic strength measurements. The effects of the catalyst loading in the range of 1–5% of the oil weight and the methanol-to-oil molar ratio of 6:1–18:1 on the kinetics of the fatty acid methyl esters synthesis were established. Moreover, the leaching and reusability of the catalyst were assessed. The obtained results revealed that hazelnut shell ash was mostly composed of K, Ca, and Mg. The highest ester content (98%) was achieved at the catalyst loading of 5%, the methanol-to-oil molar ratio of 12:1, and the reaction time of 10 min. The contribution of homogeneous catalysis because of the catalyst leaching was confirmed but did not determine the overall reaction rate. The catalyst can be reused after the recalcination at 800 °C for 2 h achieving the high methyl esters content (>96%) in 30 min after three subsequent runs. The overall reaction followed the pseudo-first-order kinetics with respect to triacylglycerols. A linear relationship between the apparent reaction rate constant and the catalyst loading and the methanol-to-oil molar ratio was determined. The determined value of the reaction rate constant was 0.0576 dm6/(min•mol2).
PB  - Elsevier
T2  - Renewable Energy
T1  - Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash
SP  - 103
EP  - 113
VL  - 183
DO  - 10.1016/j.renene.2021.10.071
UR  - https://hdl.handle.net/21.15107/rcub_dais_12337
ER  - 
@article{
author = "Miladinović, Marija M. and Krstić, Jugoslav B. and Zdujić, Miodrag V. and Veselinović, Ljiljana M. and Veljović, Đorđe N. and Banković-Ilić, Ivana B. and Stamenković, Olivera S. and Veljković, Vlada B.",
year = "2022",
abstract = "Hazelnut shell ash was investigated as a new base catalyst for the transesterification of used cooking sunflower oil to biodiesel. To understand its catalytic properties, the prepared ash was characterized by EDX, XRD, TGA/DTA, Hg porosimetry, N2 physisorption, FE-SEM, and basic strength measurements. The effects of the catalyst loading in the range of 1–5% of the oil weight and the methanol-to-oil molar ratio of 6:1–18:1 on the kinetics of the fatty acid methyl esters synthesis were established. Moreover, the leaching and reusability of the catalyst were assessed. The obtained results revealed that hazelnut shell ash was mostly composed of K, Ca, and Mg. The highest ester content (98%) was achieved at the catalyst loading of 5%, the methanol-to-oil molar ratio of 12:1, and the reaction time of 10 min. The contribution of homogeneous catalysis because of the catalyst leaching was confirmed but did not determine the overall reaction rate. The catalyst can be reused after the recalcination at 800 °C for 2 h achieving the high methyl esters content (>96%) in 30 min after three subsequent runs. The overall reaction followed the pseudo-first-order kinetics with respect to triacylglycerols. A linear relationship between the apparent reaction rate constant and the catalyst loading and the methanol-to-oil molar ratio was determined. The determined value of the reaction rate constant was 0.0576 dm6/(min•mol2).",
publisher = "Elsevier",
journal = "Renewable Energy",
title = "Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash",
pages = "103-113",
volume = "183",
doi = "10.1016/j.renene.2021.10.071",
url = "https://hdl.handle.net/21.15107/rcub_dais_12337"
}
Miladinović, M. M., Krstić, J. B., Zdujić, M. V., Veselinović, L. M., Veljović, Đ. N., Banković-Ilić, I. B., Stamenković, O. S.,& Veljković, V. B.. (2022). Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash. in Renewable Energy
Elsevier., 183, 103-113.
https://doi.org/10.1016/j.renene.2021.10.071
https://hdl.handle.net/21.15107/rcub_dais_12337
Miladinović MM, Krstić JB, Zdujić MV, Veselinović LM, Veljović ĐN, Banković-Ilić IB, Stamenković OS, Veljković VB. Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash. in Renewable Energy. 2022;183:103-113.
doi:10.1016/j.renene.2021.10.071
https://hdl.handle.net/21.15107/rcub_dais_12337 .
Miladinović, Marija M., Krstić, Jugoslav B., Zdujić, Miodrag V., Veselinović, Ljiljana M., Veljović, Đorđe N., Banković-Ilić, Ivana B., Stamenković, Olivera S., Veljković, Vlada B., "Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash" in Renewable Energy, 183 (2022):103-113,
https://doi.org/10.1016/j.renene.2021.10.071 .,
https://hdl.handle.net/21.15107/rcub_dais_12337 .
8
6

Novel Calcium Phosphate Coatings with Selenum on Titanium

Pantović-Pavlović, Marijana; Ignjatović, Nenad; Panić, Vladimir V.; Pavlović, Miroslav M.

(Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)

TY  - CONF
AU  - Pantović-Pavlović, Marijana
AU  - Ignjatović, Nenad
AU  - Panić, Vladimir V.
AU  - Pavlović, Miroslav M.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13652
AB  - This paper deals with the deposition of calcium phosphate and hybrid coatings based on calcium phosphate ceramics on titanium with improved properties by in situ anodization/anaphoretic deposition process. Hybrid coatings consisted of chitosan oligolactate (ChOL) and ChOL with Se as immunomodulatory oligoelement. The paper contributes to solving the problem of multi-stage pre-treatment and post-treatment of titanium and oxidized titanium surface to obtain a coating on the substrate, adhesion of the coating, antimicrobial and cytotoxic properties that occur in biomaterials, as well as reduced immune inflammatory response of the organism. The in situ method results in improved adhesion bioactive coating, increased bioactivity and biocompatibility with increased antimicrobial properties and absence of cytotoxicity. The studied biomaterials have improved properties such as: corrosion resistance, absence of toxicity to the human body and adequate strength, which enables their potential use in medicine and dentistry. The innovation is reflected in combining calcium phosphate coating synthesis and surface modification by partially incorporating a ceramic coating into the crystalline structure of the substrate. The characterization of the coatings obtained in this manner was performed by various physico-chemical, biochemical and biological methods. These characterization techniques included: FE-SEM, XRD, FTIR, cytotoxicity and in vivo testing.
PB  - Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM
C3  - Meeting point of the science and practice in the fields of corrosion, materials and environmental protection : proceedings = Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine : knjiga radova / XXIII YuCorr International Conference = XXIII YuCorr Međunarodna konferencija, May 16-19, 2022, Divčibare, Serbia
T1  - Novel Calcium Phosphate Coatings with Selenum on Titanium
SP  - poster-102
UR  - https://hdl.handle.net/21.15107/rcub_dais_13652
ER  - 
@conference{
author = "Pantović-Pavlović, Marijana and Ignjatović, Nenad and Panić, Vladimir V. and Pavlović, Miroslav M.",
year = "2022",
abstract = "This paper deals with the deposition of calcium phosphate and hybrid coatings based on calcium phosphate ceramics on titanium with improved properties by in situ anodization/anaphoretic deposition process. Hybrid coatings consisted of chitosan oligolactate (ChOL) and ChOL with Se as immunomodulatory oligoelement. The paper contributes to solving the problem of multi-stage pre-treatment and post-treatment of titanium and oxidized titanium surface to obtain a coating on the substrate, adhesion of the coating, antimicrobial and cytotoxic properties that occur in biomaterials, as well as reduced immune inflammatory response of the organism. The in situ method results in improved adhesion bioactive coating, increased bioactivity and biocompatibility with increased antimicrobial properties and absence of cytotoxicity. The studied biomaterials have improved properties such as: corrosion resistance, absence of toxicity to the human body and adequate strength, which enables their potential use in medicine and dentistry. The innovation is reflected in combining calcium phosphate coating synthesis and surface modification by partially incorporating a ceramic coating into the crystalline structure of the substrate. The characterization of the coatings obtained in this manner was performed by various physico-chemical, biochemical and biological methods. These characterization techniques included: FE-SEM, XRD, FTIR, cytotoxicity and in vivo testing.",
publisher = "Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM",
journal = "Meeting point of the science and practice in the fields of corrosion, materials and environmental protection : proceedings = Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine : knjiga radova / XXIII YuCorr International Conference = XXIII YuCorr Međunarodna konferencija, May 16-19, 2022, Divčibare, Serbia",
title = "Novel Calcium Phosphate Coatings with Selenum on Titanium",
pages = "poster-102",
url = "https://hdl.handle.net/21.15107/rcub_dais_13652"
}
Pantović-Pavlović, M., Ignjatović, N., Panić, V. V.,& Pavlović, M. M.. (2022). Novel Calcium Phosphate Coatings with Selenum on Titanium. in Meeting point of the science and practice in the fields of corrosion, materials and environmental protection : proceedings = Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine : knjiga radova / XXIII YuCorr International Conference = XXIII YuCorr Međunarodna konferencija, May 16-19, 2022, Divčibare, Serbia
Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM., poster-102.
https://hdl.handle.net/21.15107/rcub_dais_13652
Pantović-Pavlović M, Ignjatović N, Panić VV, Pavlović MM. Novel Calcium Phosphate Coatings with Selenum on Titanium. in Meeting point of the science and practice in the fields of corrosion, materials and environmental protection : proceedings = Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine : knjiga radova / XXIII YuCorr International Conference = XXIII YuCorr Međunarodna konferencija, May 16-19, 2022, Divčibare, Serbia. 2022;:poster-102.
https://hdl.handle.net/21.15107/rcub_dais_13652 .
Pantović-Pavlović, Marijana, Ignjatović, Nenad, Panić, Vladimir V., Pavlović, Miroslav M., "Novel Calcium Phosphate Coatings with Selenum on Titanium" in Meeting point of the science and practice in the fields of corrosion, materials and environmental protection : proceedings = Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine : knjiga radova / XXIII YuCorr International Conference = XXIII YuCorr Međunarodna konferencija, May 16-19, 2022, Divčibare, Serbia (2022):poster-102,
https://hdl.handle.net/21.15107/rcub_dais_13652 .

Advanced hybrid composite coatings based on calcium phosphate on titanium for potential biomedical applications

Pantović-Pavlović, Marijana; Ignjatović, Nenad; Panić, Vladimir V.; Pavlović, Miroslav M.

(Split : Central and EasternEuropeanCommittee for Thermal Analysis and Calorimetry (CEEC-TAC), 2022)

TY  - CONF
AU  - Pantović-Pavlović, Marijana
AU  - Ignjatović, Nenad
AU  - Panić, Vladimir V.
AU  - Pavlović, Miroslav M.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13653
AB  - This paper deals with the issue of defining a new method of anodizing/anaphoretic deposition for the application of calcium phosphate and hybrid coatings based on calcium phosphate ceramics on titanium and anodized titanium coatings with improved properties. Hybrid coatings consisted of chitosan oligolactate (ChOL) and ChOL with Se as immunomodulatory oligoelement. The paper contributes to solving the problem of multi-stage pre-treatment and posttreatment of titanium and oxidized titanium surface to obtain a coating on the substrate, adhesion of the coating, antimicrobial and cytotoxic properties that occur in biomaterials, as well as reduced immune inflammatory response of the organism. It primarily deals with the creation and optimization of a new in situ anodizing/anaphoretic deposition process for obtaining multifunctional composite biomaterials. The in situ method results in improved adhesion bioactive coating, increased bioactivity and biocompatibility with increased antimicrobial properties and absence of cytotoxicity. The studied biomaterials have improved properties such as: corrosion resistance, absence of toxicity to the human body and adequate strength, which enables their potential use in medicine and dentistry. The aim of the research was to define new in situ anodizing/anaphoretic deposition process and adequate modification of process parameters for application of composite calcium phosphate coatings on titanium and its alloys, wherein innovation is reflected in combining calcium phosphate coating synthesis and surface modification by partially incorporating a ceramic coating into the crystalline structure of the substrate. The characterization of the coatings obtained in this manner was performed by various physico-chemical, biochemical and biological methods. These characterization techniques included: AFM, SEM, FE-SEM, roughness testing, XRD, FTIR, bioactivity, biocompatibility, cytotoxicity, antimicrobial activity and in vivo testing.
PB  - Split : Central and EasternEuropeanCommittee for Thermal Analysis and Calorimetry (CEEC-TAC)
C3  - Book of abstracts of the ISt Central and Eastern European Conference on Physical Chemistry and Materials Science (CEEC-PCMS1))
T1  - Advanced hybrid composite coatings based on calcium phosphate on titanium for potential biomedical applications
SP  - 44
EP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_13653
ER  - 
@conference{
author = "Pantović-Pavlović, Marijana and Ignjatović, Nenad and Panić, Vladimir V. and Pavlović, Miroslav M.",
year = "2022",
abstract = "This paper deals with the issue of defining a new method of anodizing/anaphoretic deposition for the application of calcium phosphate and hybrid coatings based on calcium phosphate ceramics on titanium and anodized titanium coatings with improved properties. Hybrid coatings consisted of chitosan oligolactate (ChOL) and ChOL with Se as immunomodulatory oligoelement. The paper contributes to solving the problem of multi-stage pre-treatment and posttreatment of titanium and oxidized titanium surface to obtain a coating on the substrate, adhesion of the coating, antimicrobial and cytotoxic properties that occur in biomaterials, as well as reduced immune inflammatory response of the organism. It primarily deals with the creation and optimization of a new in situ anodizing/anaphoretic deposition process for obtaining multifunctional composite biomaterials. The in situ method results in improved adhesion bioactive coating, increased bioactivity and biocompatibility with increased antimicrobial properties and absence of cytotoxicity. The studied biomaterials have improved properties such as: corrosion resistance, absence of toxicity to the human body and adequate strength, which enables their potential use in medicine and dentistry. The aim of the research was to define new in situ anodizing/anaphoretic deposition process and adequate modification of process parameters for application of composite calcium phosphate coatings on titanium and its alloys, wherein innovation is reflected in combining calcium phosphate coating synthesis and surface modification by partially incorporating a ceramic coating into the crystalline structure of the substrate. The characterization of the coatings obtained in this manner was performed by various physico-chemical, biochemical and biological methods. These characterization techniques included: AFM, SEM, FE-SEM, roughness testing, XRD, FTIR, bioactivity, biocompatibility, cytotoxicity, antimicrobial activity and in vivo testing.",
publisher = "Split : Central and EasternEuropeanCommittee for Thermal Analysis and Calorimetry (CEEC-TAC)",
journal = "Book of abstracts of the ISt Central and Eastern European Conference on Physical Chemistry and Materials Science (CEEC-PCMS1))",
title = "Advanced hybrid composite coatings based on calcium phosphate on titanium for potential biomedical applications",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_dais_13653"
}
Pantović-Pavlović, M., Ignjatović, N., Panić, V. V.,& Pavlović, M. M.. (2022). Advanced hybrid composite coatings based on calcium phosphate on titanium for potential biomedical applications. in Book of abstracts of the ISt Central and Eastern European Conference on Physical Chemistry and Materials Science (CEEC-PCMS1))
Split : Central and EasternEuropeanCommittee for Thermal Analysis and Calorimetry (CEEC-TAC)., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_13653
Pantović-Pavlović M, Ignjatović N, Panić VV, Pavlović MM. Advanced hybrid composite coatings based on calcium phosphate on titanium for potential biomedical applications. in Book of abstracts of the ISt Central and Eastern European Conference on Physical Chemistry and Materials Science (CEEC-PCMS1)). 2022;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_13653 .
Pantović-Pavlović, Marijana, Ignjatović, Nenad, Panić, Vladimir V., Pavlović, Miroslav M., "Advanced hybrid composite coatings based on calcium phosphate on titanium for potential biomedical applications" in Book of abstracts of the ISt Central and Eastern European Conference on Physical Chemistry and Materials Science (CEEC-PCMS1)) (2022):44-44,
https://hdl.handle.net/21.15107/rcub_dais_13653 .

Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions

Zdolšek, Nikola; Janković, Bojan; Milović, Miloš; Brković, Snežana; Krstić, Jugoslav; Perović, Ivana; Vujković, Milica

(2022)

TY  - JOUR
AU  - Zdolšek, Nikola
AU  - Janković, Bojan
AU  - Milović, Miloš
AU  - Brković, Snežana
AU  - Krstić, Jugoslav
AU  - Perović, Ivana
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13511
AB  - The development of carbon materials with desirable textures and new aqueous electrolytes is the key strategy to improve the performance of supercapacitors. Herein, a deep eutectic solvent (DES) was used for in situ templating of a carbon material. A carbon material was characterized (XRD, N2-physisorption, FTIR, SEM and EDS) and used as an electrode material for the first time in multivalent-based supercapacitors. In situ templating of carbon was performed using a novel DES, which serves as a precursor for carbon and for in situ generation of MgO. The generation of MgO and its roles in templating of carbon were discussed. Templating of carbon with MgO lead to an increase in surface area and a microporous texture. The obtained carbon was tested in multivalent-ion (Al3+ and Mg2+) electrolytes and compared with H2SO4. The charge-storage mechanism was investigated and elaborated. The highest specific capacitance was obtained for the Al(NO3)3 electrolyte, while the operating voltage follows the order: Mg(NO3)2 > Al(NO3)3 > H2SO4. Electrical double-layer capacitance (versus pseudocapacitance) was dominant in all investigated electrolytes. The larger operating voltage in multivalent electrolytes is a consequence of the lower fraction of free water, which suppresses hydrogen evolution (when compared with H2SO4). The GCD was experimentally performed on the Al(NO3)3 electrolyte, which showed good cyclic stability, with an energy density of 22.3 Wh kg−1 at 65 W kg−1.
T2  - Batteries
T1  - Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions
SP  - 284
VL  - 8
IS  - 12
DO  - 10.3390/batteries8120284
UR  - https://hdl.handle.net/21.15107/rcub_dais_13511
ER  - 
@article{
author = "Zdolšek, Nikola and Janković, Bojan and Milović, Miloš and Brković, Snežana and Krstić, Jugoslav and Perović, Ivana and Vujković, Milica",
year = "2022",
abstract = "The development of carbon materials with desirable textures and new aqueous electrolytes is the key strategy to improve the performance of supercapacitors. Herein, a deep eutectic solvent (DES) was used for in situ templating of a carbon material. A carbon material was characterized (XRD, N2-physisorption, FTIR, SEM and EDS) and used as an electrode material for the first time in multivalent-based supercapacitors. In situ templating of carbon was performed using a novel DES, which serves as a precursor for carbon and for in situ generation of MgO. The generation of MgO and its roles in templating of carbon were discussed. Templating of carbon with MgO lead to an increase in surface area and a microporous texture. The obtained carbon was tested in multivalent-ion (Al3+ and Mg2+) electrolytes and compared with H2SO4. The charge-storage mechanism was investigated and elaborated. The highest specific capacitance was obtained for the Al(NO3)3 electrolyte, while the operating voltage follows the order: Mg(NO3)2 > Al(NO3)3 > H2SO4. Electrical double-layer capacitance (versus pseudocapacitance) was dominant in all investigated electrolytes. The larger operating voltage in multivalent electrolytes is a consequence of the lower fraction of free water, which suppresses hydrogen evolution (when compared with H2SO4). The GCD was experimentally performed on the Al(NO3)3 electrolyte, which showed good cyclic stability, with an energy density of 22.3 Wh kg−1 at 65 W kg−1.",
journal = "Batteries",
title = "Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions",
pages = "284",
volume = "8",
number = "12",
doi = "10.3390/batteries8120284",
url = "https://hdl.handle.net/21.15107/rcub_dais_13511"
}
Zdolšek, N., Janković, B., Milović, M., Brković, S., Krstić, J., Perović, I.,& Vujković, M.. (2022). Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions. in Batteries, 8(12), 284.
https://doi.org/10.3390/batteries8120284
https://hdl.handle.net/21.15107/rcub_dais_13511
Zdolšek N, Janković B, Milović M, Brković S, Krstić J, Perović I, Vujković M. Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions. in Batteries. 2022;8(12):284.
doi:10.3390/batteries8120284
https://hdl.handle.net/21.15107/rcub_dais_13511 .
Zdolšek, Nikola, Janković, Bojan, Milović, Miloš, Brković, Snežana, Krstić, Jugoslav, Perović, Ivana, Vujković, Milica, "Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions" in Batteries, 8, no. 12 (2022):284,
https://doi.org/10.3390/batteries8120284 .,
https://hdl.handle.net/21.15107/rcub_dais_13511 .

Idejni projekat generatora analognog diskretnog uniformnog šuma

Vujičić, Bojan; Radonjić, Aleksandar; Pejić, Dragan; Vujičić, Vladimir

(Belgrade : ETRAN, 2021)

TY  - CONF
AU  - Vujičić, Bojan
AU  - Radonjić, Aleksandar
AU  - Pejić, Dragan
AU  - Vujičić, Vladimir
PY  - 2021
UR  - https://www.etran.rs/2021/wp-content/uploads/2021/08/PROGRAM_ETRAN_2021_final_b5_za_web.pdf
UR  - https://dais.sanu.ac.rs/123456789/11921
AB  - U radu ce predlaže ideja generatora analognog diskretnog uniformnog šuma (GADUŠ) za primenu u stohastičkoj digitalnoj mernoj metodi. Predloženim rešenjem, za razliku od standardnog, koje koristi generator slučajnih brojeva i precizni i tačni digitalno-analogni konvertor (DAK), se prevazilazi problem ograničene rezolucije DAK-a i njegov uzak propusni opseg.
PB  - Belgrade : ETRAN
C3  - Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
T1  - Idejni projekat generatora analognog diskretnog uniformnog šuma
SP  - 54
EP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_dais_11921
ER  - 
@conference{
author = "Vujičić, Bojan and Radonjić, Aleksandar and Pejić, Dragan and Vujičić, Vladimir",
year = "2021",
abstract = "U radu ce predlaže ideja generatora analognog diskretnog uniformnog šuma (GADUŠ) za primenu u stohastičkoj digitalnoj mernoj metodi. Predloženim rešenjem, za razliku od standardnog, koje koristi generator slučajnih brojeva i precizni i tačni digitalno-analogni konvertor (DAK), se prevazilazi problem ograničene rezolucije DAK-a i njegov uzak propusni opseg.",
publisher = "Belgrade : ETRAN",
journal = "Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina",
title = "Idejni projekat generatora analognog diskretnog uniformnog šuma",
pages = "54-54",
url = "https://hdl.handle.net/21.15107/rcub_dais_11921"
}
Vujičić, B., Radonjić, A., Pejić, D.,& Vujičić, V.. (2021). Idejni projekat generatora analognog diskretnog uniformnog šuma. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
Belgrade : ETRAN., 54-54.
https://hdl.handle.net/21.15107/rcub_dais_11921
Vujičić B, Radonjić A, Pejić D, Vujičić V. Idejni projekat generatora analognog diskretnog uniformnog šuma. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina. 2021;:54-54.
https://hdl.handle.net/21.15107/rcub_dais_11921 .
Vujičić, Bojan, Radonjić, Aleksandar, Pejić, Dragan, Vujičić, Vladimir, "Idejni projekat generatora analognog diskretnog uniformnog šuma" in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina (2021):54-54,
https://hdl.handle.net/21.15107/rcub_dais_11921 .

Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing

Dojčinović, Milena P.; Vasiljević, Zorka Ž.; Krstić, Jugoslav B.; Vujančević, Jelena D.; Marković, Smilja; Tadić, Nenad B.; Nikolic, Maria Vesna

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena D.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolic, Maria Vesna
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11797
AB  - Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.
PB  - Basel : MDPI AG
T2  - Sensors
T1  - Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing
SP  - 4357
VL  - 21
IS  - 13
DO  - 10.3390/s21134357
UR  - https://hdl.handle.net/21.15107/rcub_dais_11797
ER  - 
@article{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Krstić, Jugoslav B. and Vujančević, Jelena D. and Marković, Smilja and Tadić, Nenad B. and Nikolic, Maria Vesna",
year = "2021",
abstract = "Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.",
publisher = "Basel : MDPI AG",
journal = "Sensors",
title = "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing",
pages = "4357",
volume = "21",
number = "13",
doi = "10.3390/s21134357",
url = "https://hdl.handle.net/21.15107/rcub_dais_11797"
}
Dojčinović, M. P., Vasiljević, Z. Ž., Krstić, J. B., Vujančević, J. D., Marković, S., Tadić, N. B.,& Nikolic, M. V.. (2021). Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors
Basel : MDPI AG., 21(13), 4357.
https://doi.org/10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797
Dojčinović MP, Vasiljević ZŽ, Krstić JB, Vujančević JD, Marković S, Tadić NB, Nikolic MV. Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors. 2021;21(13):4357.
doi:10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797 .
Dojčinović, Milena P., Vasiljević, Zorka Ž., Krstić, Jugoslav B., Vujančević, Jelena D., Marković, Smilja, Tadić, Nenad B., Nikolic, Maria Vesna, "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing" in Sensors, 21, no. 13 (2021):4357,
https://doi.org/10.3390/s21134357 .,
https://hdl.handle.net/21.15107/rcub_dais_11797 .
9
1
8

Ispitivanje i otklanјanјe pojave korozije i termičkih oksida na metalnim delovima elektroenergetskog postojenja

Mihailović, Marija; Jegdić, Bore; Jugović, Branimir; Kovačina, Jovanka; Radojković, Bojana; Patarić, Aleksandra; Jokić, Bojan

(Belgrade : University of Belgrade - Institute of Chemistry, Technology and Metallurgy, 2021)

TY  - GEN
AU  - Mihailović, Marija
AU  - Jegdić, Bore
AU  - Jugović, Branimir
AU  - Kovačina, Jovanka
AU  - Radojković, Bojana
AU  - Patarić, Aleksandra
AU  - Jokić, Bojan
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11630
AB  - Praćenje pojave i brzine korozije, nastanak termičkih oksida na površini metalnih delova eletroenergetskog postrojenјa, kao i način njihovog otklanjanja na način koji je tehnološki pogodan, ekonomski pristupačan i ekološki opravdan prikazan je u ovom tehničkom rešenju Ispitivanjem je ustanovljeno da su metalni delovi na kojima se javlja korozija izrađeni od na nerđajućeg čelika AISI 304, pa je pojava korozije i termičkih oksida praćena je u odnosu na to, kao i sastav prašine sa kojom su metalni delovi u kontaktu. Pojava termičkih oksida na površini nerđajućih čelika posledica je povišene temperature na mestu zavarivanja metalnih delova.
Merena je vrednost pH oba rastvora: etalonskog i zasićenog rastvoru prašine iz pogona.
Sastav uzoraka prašine određen je FTIR metodom, pa su na osnovu prisutnih jona u rastvoru definisana ostala ispitivanja.
Određivan je korozioni potencijal Ekor, vrednost otpora polarizacije Rp, kao i gustina struje korozije jkor. Sva ispitivanja nerđajućeg čelika u etalonskom rastvoru i u zasićenom rastvoru prašine iz pogona firme naručioca, rađena su za 1 sat i u toku 25 dana.
Kao rezultat svih istražoivanja, date su tehnološke preporuke i način otklanjanja korozije i termičkih oksida.
Rešenje je prodato naručuicu u toku 2020.godine, a od januara 2021.godine primenjeno u postrojenju naručioca, ELNOS BL d.o.o., koji su izjavom potvrdili primenu ovog tehničkog rešenja u svom poslovanju.
AB  - Monitoring the occurrence and rate of corrosion, the formation of thermal oxides on the surface of metal parts of the power plant, as well as the method of their elimination in a way that is technologically suitable, economically affordable and environmentally justified is shown in this technical solution. It has been established that the metal elements affected by corrosion were made from stainless steel AISI 304. Accordingly, the occurrence of corrosion and thermal oxides was monitored based on the material and the composition of the dust with which the metal parts are in contact. The emergence of thermal oxides on the surface of stainless steels is a consequence of the elevated temperature at the welding site.
The pH value of both solutions was measured: standard and saturated solution of dust from the plant. The composition of the dust samples was determined by FTIR. The other tests were defined based on the ions present in the solution.
The corrosion potential, the value of the polarization resistance, as well as the corrosion current density were determined. All tests of stainless steel in the standard solution and in the saturated solution of dust were performed for one hour within a span of 25 days.
Technological recommendations on how to eliminate corrosion and thermal oxides are provided.
The solution has been applied since January 2021 by ELNOS BL d.o.o.
PB  - Belgrade : University of Belgrade - Institute of Chemistry, Technology and Metallurgy
T1  - Ispitivanje i otklanјanјe pojave korozije i termičkih oksida na metalnim delovima elektroenergetskog postojenja
T1  - Possibility of removal of corrosion and thermal oxides on metal parts of electric power plant
UR  - https://hdl.handle.net/21.15107/rcub_dais_11630
ER  - 
@misc{
author = "Mihailović, Marija and Jegdić, Bore and Jugović, Branimir and Kovačina, Jovanka and Radojković, Bojana and Patarić, Aleksandra and Jokić, Bojan",
year = "2021",
abstract = "Praćenje pojave i brzine korozije, nastanak termičkih oksida na površini metalnih delova eletroenergetskog postrojenјa, kao i način njihovog otklanjanja na način koji je tehnološki pogodan, ekonomski pristupačan i ekološki opravdan prikazan je u ovom tehničkom rešenju Ispitivanjem je ustanovljeno da su metalni delovi na kojima se javlja korozija izrađeni od na nerđajućeg čelika AISI 304, pa je pojava korozije i termičkih oksida praćena je u odnosu na to, kao i sastav prašine sa kojom su metalni delovi u kontaktu. Pojava termičkih oksida na površini nerđajućih čelika posledica je povišene temperature na mestu zavarivanja metalnih delova.
Merena je vrednost pH oba rastvora: etalonskog i zasićenog rastvoru prašine iz pogona.
Sastav uzoraka prašine određen je FTIR metodom, pa su na osnovu prisutnih jona u rastvoru definisana ostala ispitivanja.
Određivan je korozioni potencijal Ekor, vrednost otpora polarizacije Rp, kao i gustina struje korozije jkor. Sva ispitivanja nerđajućeg čelika u etalonskom rastvoru i u zasićenom rastvoru prašine iz pogona firme naručioca, rađena su za 1 sat i u toku 25 dana.
Kao rezultat svih istražoivanja, date su tehnološke preporuke i način otklanjanja korozije i termičkih oksida.
Rešenje je prodato naručuicu u toku 2020.godine, a od januara 2021.godine primenjeno u postrojenju naručioca, ELNOS BL d.o.o., koji su izjavom potvrdili primenu ovog tehničkog rešenja u svom poslovanju., Monitoring the occurrence and rate of corrosion, the formation of thermal oxides on the surface of metal parts of the power plant, as well as the method of their elimination in a way that is technologically suitable, economically affordable and environmentally justified is shown in this technical solution. It has been established that the metal elements affected by corrosion were made from stainless steel AISI 304. Accordingly, the occurrence of corrosion and thermal oxides was monitored based on the material and the composition of the dust with which the metal parts are in contact. The emergence of thermal oxides on the surface of stainless steels is a consequence of the elevated temperature at the welding site.
The pH value of both solutions was measured: standard and saturated solution of dust from the plant. The composition of the dust samples was determined by FTIR. The other tests were defined based on the ions present in the solution.
The corrosion potential, the value of the polarization resistance, as well as the corrosion current density were determined. All tests of stainless steel in the standard solution and in the saturated solution of dust were performed for one hour within a span of 25 days.
Technological recommendations on how to eliminate corrosion and thermal oxides are provided.
The solution has been applied since January 2021 by ELNOS BL d.o.o.",
publisher = "Belgrade : University of Belgrade - Institute of Chemistry, Technology and Metallurgy",
title = "Ispitivanje i otklanјanјe pojave korozije i termičkih oksida na metalnim delovima elektroenergetskog postojenja, Possibility of removal of corrosion and thermal oxides on metal parts of electric power plant",
url = "https://hdl.handle.net/21.15107/rcub_dais_11630"
}
Mihailović, M., Jegdić, B., Jugović, B., Kovačina, J., Radojković, B., Patarić, A.,& Jokić, B.. (2021). Ispitivanje i otklanјanјe pojave korozije i termičkih oksida na metalnim delovima elektroenergetskog postojenja. 
Belgrade : University of Belgrade - Institute of Chemistry, Technology and Metallurgy..
https://hdl.handle.net/21.15107/rcub_dais_11630
Mihailović M, Jegdić B, Jugović B, Kovačina J, Radojković B, Patarić A, Jokić B. Ispitivanje i otklanјanјe pojave korozije i termičkih oksida na metalnim delovima elektroenergetskog postojenja. 2021;.
https://hdl.handle.net/21.15107/rcub_dais_11630 .
Mihailović, Marija, Jegdić, Bore, Jugović, Branimir, Kovačina, Jovanka, Radojković, Bojana, Patarić, Aleksandra, Jokić, Bojan, "Ispitivanje i otklanјanјe pojave korozije i termičkih oksida na metalnim delovima elektroenergetskog postojenja" (2021),
https://hdl.handle.net/21.15107/rcub_dais_11630 .

The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries

Rakočević, Lazar; Štrbac, Svetlana; Potočnik, Jelena; Popović, Maja; Jugović, Dragana; Stojković Simatović, Ivana

(Elsevier BV, 2021)

TY  - JOUR
AU  - Rakočević, Lazar
AU  - Štrbac, Svetlana
AU  - Potočnik, Jelena
AU  - Popović, Maja
AU  - Jugović, Dragana
AU  - Stojković Simatović, Ivana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/10035
AB  - Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 °C, while 3-D tunnel structured Na0·4MnO2 and Na0·44MnO2, both with rod-like morphology, were obtained at 800 °C and 900 °C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0·44MnO2 obtained at 900 °C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.
PB  - Elsevier BV
T2  - Ceramics International
T1  - The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries
SP  - 4595
EP  - 4603
VL  - 47
IS  - 4
DO  - 10.1016/j.ceramint.2020.10.025
UR  - https://hdl.handle.net/21.15107/rcub_dais_10035
ER  - 
@article{
author = "Rakočević, Lazar and Štrbac, Svetlana and Potočnik, Jelena and Popović, Maja and Jugović, Dragana and Stojković Simatović, Ivana",
year = "2021",
abstract = "Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 °C, while 3-D tunnel structured Na0·4MnO2 and Na0·44MnO2, both with rod-like morphology, were obtained at 800 °C and 900 °C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0·44MnO2 obtained at 900 °C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.",
publisher = "Elsevier BV",
journal = "Ceramics International",
title = "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries",
pages = "4595-4603",
volume = "47",
number = "4",
doi = "10.1016/j.ceramint.2020.10.025",
url = "https://hdl.handle.net/21.15107/rcub_dais_10035"
}
Rakočević, L., Štrbac, S., Potočnik, J., Popović, M., Jugović, D.,& Stojković Simatović, I.. (2021). The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International
Elsevier BV., 47(4), 4595-4603.
https://doi.org/10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_10035
Rakočević L, Štrbac S, Potočnik J, Popović M, Jugović D, Stojković Simatović I. The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International. 2021;47(4):4595-4603.
doi:10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_10035 .
Rakočević, Lazar, Štrbac, Svetlana, Potočnik, Jelena, Popović, Maja, Jugović, Dragana, Stojković Simatović, Ivana, "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries" in Ceramics International, 47, no. 4 (2021):4595-4603,
https://doi.org/10.1016/j.ceramint.2020.10.025 .,
https://hdl.handle.net/21.15107/rcub_dais_10035 .
13
12

The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries

Rakočević, Lazar; Štrbac, Svetlana; Potočnik, Jelena; Popović, Maja; Jugović, Dragana; Stojković Simatović, Ivana

(Elsevier, 2021)

TY  - JOUR
AU  - Rakočević, Lazar
AU  - Štrbac, Svetlana
AU  - Potočnik, Jelena
AU  - Popović, Maja
AU  - Jugović, Dragana
AU  - Stojković Simatović, Ivana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11229
AB  - Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 ◦C, while 3-D tunnel structured Na0⋅4MnO2 and Na0⋅44MnO2, both with rod-like morphology, were obtained at 800 ◦C and 900 ◦C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0⋅44MnO2 obtained at 900 ◦C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.
PB  - Elsevier
T2  - Ceramics International
T1  - The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries
SP  - 4595
EP  - 4603
VL  - 47
IS  - 4
DO  - 10.1016/j.ceramint.2020.10.025
UR  - https://hdl.handle.net/21.15107/rcub_dais_11229
ER  - 
@article{
author = "Rakočević, Lazar and Štrbac, Svetlana and Potočnik, Jelena and Popović, Maja and Jugović, Dragana and Stojković Simatović, Ivana",
year = "2021",
abstract = "Cathodic material for sodium-ion rechargeable batteries based on NaxMnO2 were synthesized by glycine nitrate method and subsequent annealing at high temperatures. Different crystal structures with different morphologies were obtained depending on the annealing temperature: hexagonal layeredα-Na0.7MnO2.05 nanoplates were obtained at 850 ◦C, while 3-D tunnel structured Na0⋅4MnO2 and Na0⋅44MnO2, both with rod-like morphology, were obtained at 800 ◦C and 900 ◦C, respectively. The investigations of the electrochemical behavior of obtained cathodic materials in aqueous NaNO3 solution have shown that Na0⋅44MnO2 obtained at 900 ◦C has shown the best battery performance. Its initial discharge capacities are 123.5 mA h/g, 113.2 mA h/g, and 102.0 mA h/g at the high current densities of 1000, 2000 and 5000 mA/g, respectively.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries",
pages = "4595-4603",
volume = "47",
number = "4",
doi = "10.1016/j.ceramint.2020.10.025",
url = "https://hdl.handle.net/21.15107/rcub_dais_11229"
}
Rakočević, L., Štrbac, S., Potočnik, J., Popović, M., Jugović, D.,& Stojković Simatović, I.. (2021). The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International
Elsevier., 47(4), 4595-4603.
https://doi.org/10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_11229
Rakočević L, Štrbac S, Potočnik J, Popović M, Jugović D, Stojković Simatović I. The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries. in Ceramics International. 2021;47(4):4595-4603.
doi:10.1016/j.ceramint.2020.10.025
https://hdl.handle.net/21.15107/rcub_dais_11229 .
Rakočević, Lazar, Štrbac, Svetlana, Potočnik, Jelena, Popović, Maja, Jugović, Dragana, Stojković Simatović, Ivana, "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries" in Ceramics International, 47, no. 4 (2021):4595-4603,
https://doi.org/10.1016/j.ceramint.2020.10.025 .,
https://hdl.handle.net/21.15107/rcub_dais_11229 .
13
12

Fractal Reconstruction of Fiber-reinforced Epoxy Microstructure

Radović, Ivan M.; Stajčić, Aleksandar; Mitić, Vojislav V.; Serpa, C.; Paunović, V.; Ranđelović, Branislav

(Institute of Electrical and Electronics Engineers Inc., 2021)

TY  - CONF
AU  - Radović, Ivan M.
AU  - Stajčić, Aleksandar
AU  - Mitić, Vojislav V.
AU  - Serpa, C.
AU  - Paunović, V.
AU  - Ranđelović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12361
AB  - In the past century, the use of polymers and composites with a polymer matrix has expanded to such a level that today it is impossible to imagine life without these materials. Epoxy resin and epoxy-based composites are widely used as construction materials, due to their excellent adhesion, thermal and chemical stability. Fractal nature analysis can provide insight in morphological changes at fiber-matrix interface level, which could give direction for the processing of composites. This mathematical technique can be performed on field emission scanning electron microscopy (FESEM) images, by identifying fiber phase and pores shapes and boundaries, as well as fiber-matrix bonding at the interface. In this study, fiberglass mat was used for the reinforcement of epoxy. FESEM image of enlarged fiber after the composite fracture was used for the reconstruction of data. With the use of affine fractal regression model, software Fractal Real Finder was employed for the reconstruction of fiber shape and the determination of Hausdorff dimension.
PB  - Institute of Electrical and Electronics Engineers Inc.
C3  - 32nd IEEE International Conference on Microelectronics, MIEL 2021
T1  - Fractal Reconstruction of Fiber-reinforced Epoxy Microstructure
SP  - 203
EP  - 206
DO  - 10.1109/MIEL52794.2021.9569054
UR  - https://hdl.handle.net/21.15107/rcub_dais_12361
ER  - 
@conference{
author = "Radović, Ivan M. and Stajčić, Aleksandar and Mitić, Vojislav V. and Serpa, C. and Paunović, V. and Ranđelović, Branislav",
year = "2021",
abstract = "In the past century, the use of polymers and composites with a polymer matrix has expanded to such a level that today it is impossible to imagine life without these materials. Epoxy resin and epoxy-based composites are widely used as construction materials, due to their excellent adhesion, thermal and chemical stability. Fractal nature analysis can provide insight in morphological changes at fiber-matrix interface level, which could give direction for the processing of composites. This mathematical technique can be performed on field emission scanning electron microscopy (FESEM) images, by identifying fiber phase and pores shapes and boundaries, as well as fiber-matrix bonding at the interface. In this study, fiberglass mat was used for the reinforcement of epoxy. FESEM image of enlarged fiber after the composite fracture was used for the reconstruction of data. With the use of affine fractal regression model, software Fractal Real Finder was employed for the reconstruction of fiber shape and the determination of Hausdorff dimension.",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
journal = "32nd IEEE International Conference on Microelectronics, MIEL 2021",
title = "Fractal Reconstruction of Fiber-reinforced Epoxy Microstructure",
pages = "203-206",
doi = "10.1109/MIEL52794.2021.9569054",
url = "https://hdl.handle.net/21.15107/rcub_dais_12361"
}
Radović, I. M., Stajčić, A., Mitić, V. V., Serpa, C., Paunović, V.,& Ranđelović, B.. (2021). Fractal Reconstruction of Fiber-reinforced Epoxy Microstructure. in 32nd IEEE International Conference on Microelectronics, MIEL 2021
Institute of Electrical and Electronics Engineers Inc.., 203-206.
https://doi.org/10.1109/MIEL52794.2021.9569054
https://hdl.handle.net/21.15107/rcub_dais_12361
Radović IM, Stajčić A, Mitić VV, Serpa C, Paunović V, Ranđelović B. Fractal Reconstruction of Fiber-reinforced Epoxy Microstructure. in 32nd IEEE International Conference on Microelectronics, MIEL 2021. 2021;:203-206.
doi:10.1109/MIEL52794.2021.9569054
https://hdl.handle.net/21.15107/rcub_dais_12361 .
Radović, Ivan M., Stajčić, Aleksandar, Mitić, Vojislav V., Serpa, C., Paunović, V., Ranđelović, Branislav, "Fractal Reconstruction of Fiber-reinforced Epoxy Microstructure" in 32nd IEEE International Conference on Microelectronics, MIEL 2021 (2021):203-206,
https://doi.org/10.1109/MIEL52794.2021.9569054 .,
https://hdl.handle.net/21.15107/rcub_dais_12361 .
2
2

Reconstruction of fiber reinforcement in epoxy-based composite

Stajčić, Aleksandar; Mitić, Vojislav V.; Serpa, Cristina; Veljković, Filip; Ranđelović, Branislav; Radović, Ivana

(Belgrade : ETRAN, 2021)

TY  - CONF
AU  - Stajčić, Aleksandar
AU  - Mitić, Vojislav V.
AU  - Serpa, Cristina
AU  - Veljković, Filip
AU  - Ranđelović, Branislav
AU  - Radović, Ivana
PY  - 2021
UR  - https://www.etran.rs/2021/wp-content/uploads/2021/11/Zbornik_Proceedings_2021_web.pdf
UR  - https://dais.sanu.ac.rs/123456789/12284
AB  - Polymer matrix composites (PMCs) are very attractive materials due to a possibility to achieve versatile properties by combining with ceramic or metal reinforcement in different shapes and sizes. As a result, PMCs have found application in nearly every field, from household appliances to aerospace industry. Modern microelectronic devices contain conductive polymers with fillers that enhance their electrical properties. In addition, PMCs are being used as insulators and adhesives, contributing to the long life of electronic devices. Epoxy resins are the most commonly used insulators and adhesives. In order to improve their fracture toughness, glass fibers can be used as an efficient reinforcement. However, with the purpose of designing a composite with good mechanical properties and durability, deep knowledge of microstructure is required. In addition, microstructural analysis can be used to connect shape and size of pores or reinforcement with various physical properties. Fractal nature analysis is a valuable mathematical tool that can be employed for different shapes and forms rendering. In this manner, successful design and prediction of composite’s properties could be obtained. In this research, field emission scanning electron microscopy (FESEM) images were used for fractal analysis of glass fibers, with the aim of reconstructing the shape.
PB  - Belgrade : ETRAN
C3  - Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina
T1  - Reconstruction of fiber reinforcement in epoxy-based composite
SP  - 409
EP  - 412
UR  - https://hdl.handle.net/21.15107/rcub_dais_12284
ER  - 
@conference{
author = "Stajčić, Aleksandar and Mitić, Vojislav V. and Serpa, Cristina and Veljković, Filip and Ranđelović, Branislav and Radović, Ivana",
year = "2021",
abstract = "Polymer matrix composites (PMCs) are very attractive materials due to a possibility to achieve versatile properties by combining with ceramic or metal reinforcement in different shapes and sizes. As a result, PMCs have found application in nearly every field, from household appliances to aerospace industry. Modern microelectronic devices contain conductive polymers with fillers that enhance their electrical properties. In addition, PMCs are being used as insulators and adhesives, contributing to the long life of electronic devices. Epoxy resins are the most commonly used insulators and adhesives. In order to improve their fracture toughness, glass fibers can be used as an efficient reinforcement. However, with the purpose of designing a composite with good mechanical properties and durability, deep knowledge of microstructure is required. In addition, microstructural analysis can be used to connect shape and size of pores or reinforcement with various physical properties. Fractal nature analysis is a valuable mathematical tool that can be employed for different shapes and forms rendering. In this manner, successful design and prediction of composite’s properties could be obtained. In this research, field emission scanning electron microscopy (FESEM) images were used for fractal analysis of glass fibers, with the aim of reconstructing the shape.",
publisher = "Belgrade : ETRAN",
journal = "Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina",
title = "Reconstruction of fiber reinforcement in epoxy-based composite",
pages = "409-412",
url = "https://hdl.handle.net/21.15107/rcub_dais_12284"
}
Stajčić, A., Mitić, V. V., Serpa, C., Veljković, F., Ranđelović, B.,& Radović, I.. (2021). Reconstruction of fiber reinforcement in epoxy-based composite. in Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina
Belgrade : ETRAN., 409-412.
https://hdl.handle.net/21.15107/rcub_dais_12284
Stajčić A, Mitić VV, Serpa C, Veljković F, Ranđelović B, Radović I. Reconstruction of fiber reinforcement in epoxy-based composite. in Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina. 2021;:409-412.
https://hdl.handle.net/21.15107/rcub_dais_12284 .
Stajčić, Aleksandar, Mitić, Vojislav V., Serpa, Cristina, Veljković, Filip, Ranđelović, Branislav, Radović, Ivana, "Reconstruction of fiber reinforcement in epoxy-based composite" in Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina (2021):409-412,
https://hdl.handle.net/21.15107/rcub_dais_12284 .

Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction

Filipović, Suzana; Obradović, Nina; Anđelković, Ljubica; Olćan, Dragan; Petrović, Jovana; Mirković, Miljana; Pavlović, Vladimir B.; Jeremić, Dejan; Vlahović, Branislav; Đorđević, Antonije

(Belgrade : International Institute for the Science of Sintering, 2021)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Anđelković, Ljubica
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir B.
AU  - Jeremić, Dejan
AU  - Vlahović, Branislav
AU  - Đorđević, Antonije
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11230
AB  - Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction
SP  - 1
EP  - 8
VL  - 53
DO  - 10.2298/SOS2101001F
UR  - https://hdl.handle.net/21.15107/rcub_dais_11230
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Anđelković, Ljubica and Olćan, Dragan and Petrović, Jovana and Mirković, Miljana and Pavlović, Vladimir B. and Jeremić, Dejan and Vlahović, Branislav and Đorđević, Antonije",
year = "2021",
abstract = "Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction",
pages = "1-8",
volume = "53",
doi = "10.2298/SOS2101001F",
url = "https://hdl.handle.net/21.15107/rcub_dais_11230"
}
Filipović, S., Obradović, N., Anđelković, L., Olćan, D., Petrović, J., Mirković, M., Pavlović, V. B., Jeremić, D., Vlahović, B.,& Đorđević, A.. (2021). Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 53, 1-8.
https://doi.org/10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230
Filipović S, Obradović N, Anđelković L, Olćan D, Petrović J, Mirković M, Pavlović VB, Jeremić D, Vlahović B, Đorđević A. Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering. 2021;53:1-8.
doi:10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230 .
Filipović, Suzana, Obradović, Nina, Anđelković, Ljubica, Olćan, Dragan, Petrović, Jovana, Mirković, Miljana, Pavlović, Vladimir B., Jeremić, Dejan, Vlahović, Branislav, Đorđević, Antonije, "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction" in Science of Sintering, 53 (2021):1-8,
https://doi.org/10.2298/SOS2101001F .,
https://hdl.handle.net/21.15107/rcub_dais_11230 .
2
1
4

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9515
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9515
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9515"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9515
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9515 .
Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir B., Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .,
https://hdl.handle.net/21.15107/rcub_dais_9515 .
18
5
17

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9514
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9514
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9514"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9514
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9514 .
Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir B., Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .,
https://hdl.handle.net/21.15107/rcub_dais_9514 .
18
5
17

Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics

Đorđević, Nataša; Peleš, Adriana; Obradović, Nina; Vlahović, Milica; Mihajlović, Slavica; Martinović, Sanja

(Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, 2021)

TY  - CONF
AU  - Đorđević, Nataša
AU  - Peleš, Adriana
AU  - Obradović, Nina
AU  - Vlahović, Milica
AU  - Mihajlović, Slavica
AU  - Martinović, Sanja
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12354
AB  - The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties.
AB  - Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
T1  - Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics
T1  - Uticaj vremena sinterovanja na gustinu i SEM analiza kordijeritne keramike
SP  - 265
EP  - 268
UR  - https://hdl.handle.net/21.15107/rcub_dais_12354
ER  - 
@conference{
author = "Đorđević, Nataša and Peleš, Adriana and Obradović, Nina and Vlahović, Milica and Mihajlović, Slavica and Martinović, Sanja",
year = "2021",
abstract = "The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties., Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021",
title = "Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics, Uticaj vremena sinterovanja na gustinu i SEM analiza kordijeritne keramike",
pages = "265-268",
url = "https://hdl.handle.net/21.15107/rcub_dais_12354"
}
Đorđević, N., Peleš, A., Obradović, N., Vlahović, M., Mihajlović, S.,& Martinović, S.. (2021). Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 265-268.
https://hdl.handle.net/21.15107/rcub_dais_12354
Đorđević N, Peleš A, Obradović N, Vlahović M, Mihajlović S, Martinović S. Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021. 2021;:265-268.
https://hdl.handle.net/21.15107/rcub_dais_12354 .
Đorđević, Nataša, Peleš, Adriana, Obradović, Nina, Vlahović, Milica, Mihajlović, Slavica, Martinović, Sanja, "Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics" in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 (2021):265-268,
https://hdl.handle.net/21.15107/rcub_dais_12354 .

Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time

Đorđević, Nataša; Peleš, Adriana; Obradović, Nina; Vlahović, Milica; Mihajlović, Slavica; Martinović, Sanja

(Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, 2021)

TY  - CONF
AU  - Đorđević, Nataša
AU  - Peleš, Adriana
AU  - Obradović, Nina
AU  - Vlahović, Milica
AU  - Mihajlović, Slavica
AU  - Martinović, Sanja
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12355
AB  - The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties.
AB  - Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
T1  - Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time
T1  - Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije
SP  - 269
EP  - 272
UR  - https://hdl.handle.net/21.15107/rcub_dais_12355
ER  - 
@conference{
author = "Đorđević, Nataša and Peleš, Adriana and Obradović, Nina and Vlahović, Milica and Mihajlović, Slavica and Martinović, Sanja",
year = "2021",
abstract = "The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties., Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021",
title = "Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time, Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije",
pages = "269-272",
url = "https://hdl.handle.net/21.15107/rcub_dais_12355"
}
Đorđević, N., Peleš, A., Obradović, N., Vlahović, M., Mihajlović, S.,& Martinović, S.. (2021). Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 269-272.
https://hdl.handle.net/21.15107/rcub_dais_12355
Đorđević N, Peleš A, Obradović N, Vlahović M, Mihajlović S, Martinović S. Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021. 2021;:269-272.
https://hdl.handle.net/21.15107/rcub_dais_12355 .
Đorđević, Nataša, Peleš, Adriana, Obradović, Nina, Vlahović, Milica, Mihajlović, Slavica, Martinović, Sanja, "Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time" in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 (2021):269-272,
https://hdl.handle.net/21.15107/rcub_dais_12355 .

Stochastic Time Response and Ultimate Noise Performance of Adsorption-Based Microfluidic Biosensors

Jokić, Ivana; Đurić, Zoran G.; Radulović, Katarina; Frantlović, Miloš; Milovanović, Gradimir V.; Krstajić, Predrag M.

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Jokić, Ivana
AU  - Đurić, Zoran G.
AU  - Radulović, Katarina
AU  - Frantlović, Miloš
AU  - Milovanović, Gradimir V.
AU  - Krstajić, Predrag M.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11638
AB  - In order to improve the interpretation of measurement results and to achieve the optimal performance of microfluidic biosensors, advanced mathematical models of their time response and noise are needed. The random nature of adsorption–desorption and mass transfer (MT) processes that generate the sensor response makes the sensor output signal inherently stochastic and necessitates the use of a stochastic approach in sensor response analysis. We present a stochastic model of the sensor time response, which takes into account the coupling of adsorption–desorption and MT processes. It is used for the analysis of response kinetics and ultimate noise performance of protein biosensors. We show that slow MT not only decelerates the response kinetics, but also increases the noise and decreases the sensor’s maximal achievable signal-to-noise ratio, thus degrading the ultimate sensor performance, including the minimal detectable/quantifiable analyte concentration. The results illustrate the significance of the presented model for the correct interpretation of measurement data, for the estimation of sensors’ noise performance metrics important for reliable analyte detection/quantification, as well as for sensor optimization in terms of the lower detection/quantification limit. They are also incentives for the further investigation of the MT influence in nanoscale sensors, as a possible cause of false-negative results in analyte detection experiments.
PB  - Basel : MDPI AG
T2  - Biosensors
T1  - Stochastic Time Response and Ultimate Noise Performance of Adsorption-Based Microfluidic Biosensors
SP  - 194
VL  - 11
IS  - 6
DO  - 10.3390/bios11060194
UR  - https://hdl.handle.net/21.15107/rcub_dais_11638
ER  - 
@article{
author = "Jokić, Ivana and Đurić, Zoran G. and Radulović, Katarina and Frantlović, Miloš and Milovanović, Gradimir V. and Krstajić, Predrag M.",
year = "2021",
abstract = "In order to improve the interpretation of measurement results and to achieve the optimal performance of microfluidic biosensors, advanced mathematical models of their time response and noise are needed. The random nature of adsorption–desorption and mass transfer (MT) processes that generate the sensor response makes the sensor output signal inherently stochastic and necessitates the use of a stochastic approach in sensor response analysis. We present a stochastic model of the sensor time response, which takes into account the coupling of adsorption–desorption and MT processes. It is used for the analysis of response kinetics and ultimate noise performance of protein biosensors. We show that slow MT not only decelerates the response kinetics, but also increases the noise and decreases the sensor’s maximal achievable signal-to-noise ratio, thus degrading the ultimate sensor performance, including the minimal detectable/quantifiable analyte concentration. The results illustrate the significance of the presented model for the correct interpretation of measurement data, for the estimation of sensors’ noise performance metrics important for reliable analyte detection/quantification, as well as for sensor optimization in terms of the lower detection/quantification limit. They are also incentives for the further investigation of the MT influence in nanoscale sensors, as a possible cause of false-negative results in analyte detection experiments.",
publisher = "Basel : MDPI AG",
journal = "Biosensors",
title = "Stochastic Time Response and Ultimate Noise Performance of Adsorption-Based Microfluidic Biosensors",
pages = "194",
volume = "11",
number = "6",
doi = "10.3390/bios11060194",
url = "https://hdl.handle.net/21.15107/rcub_dais_11638"
}
Jokić, I., Đurić, Z. G., Radulović, K., Frantlović, M., Milovanović, G. V.,& Krstajić, P. M.. (2021). Stochastic Time Response and Ultimate Noise Performance of Adsorption-Based Microfluidic Biosensors. in Biosensors
Basel : MDPI AG., 11(6), 194.
https://doi.org/10.3390/bios11060194
https://hdl.handle.net/21.15107/rcub_dais_11638
Jokić I, Đurić ZG, Radulović K, Frantlović M, Milovanović GV, Krstajić PM. Stochastic Time Response and Ultimate Noise Performance of Adsorption-Based Microfluidic Biosensors. in Biosensors. 2021;11(6):194.
doi:10.3390/bios11060194
https://hdl.handle.net/21.15107/rcub_dais_11638 .
Jokić, Ivana, Đurić, Zoran G., Radulović, Katarina, Frantlović, Miloš, Milovanović, Gradimir V., Krstajić, Predrag M., "Stochastic Time Response and Ultimate Noise Performance of Adsorption-Based Microfluidic Biosensors" in Biosensors, 11, no. 6 (2021):194,
https://doi.org/10.3390/bios11060194 .,
https://hdl.handle.net/21.15107/rcub_dais_11638 .
2
2

Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition

Pantović-Pavlović, Marijana; Pavlović, Miroslav; Kovačina, Jovanka; Stanojević, Boris; Stevanović, Jasmina; Panić, Vladimir; Ignjatović, Nenad

(Belgrade : Serbian Chemical Society, 2021)

TY  - JOUR
AU  - Pantović-Pavlović, Marijana
AU  - Pavlović, Miroslav
AU  - Kovačina, Jovanka
AU  - Stanojević, Boris
AU  - Stevanović, Jasmina
AU  - Panić, Vladimir
AU  - Ignjatović, Nenad
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11738
AB  - The cytotoxicity of amorphous calcium phosphate (ACP) and chitosan lactate (ChOL) multifunctional and hybrid composite coatings on MRC-5 human lung fibroblast cell line was elucidated. ACP/TiO2 and ACP/TiO2/ /ChOL were deposited onto Ti by a novel in situ anodization/anaphoretic process at constant voltage. Cytotoxicity tests showed that there was no significant decrease in the survival of healthy MRC-5 cells exposed to composite samples without chitosan lactate, while there was an increase in the number of viable cells in the sample containing ChOL. These findings show that there was improved cell proliferation, differentiation and cell viability in the ChOL-containing sample, which makes ACP/TiO2/ChOL coating a good candidate for applications in medicine and stomatology.
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition
SP  - 555
EP  - 559
VL  - 86
IS  - 6
DO  - 10.2298/JSC210211024P
UR  - https://hdl.handle.net/21.15107/rcub_dais_11738
ER  - 
@article{
author = "Pantović-Pavlović, Marijana and Pavlović, Miroslav and Kovačina, Jovanka and Stanojević, Boris and Stevanović, Jasmina and Panić, Vladimir and Ignjatović, Nenad",
year = "2021",
abstract = "The cytotoxicity of amorphous calcium phosphate (ACP) and chitosan lactate (ChOL) multifunctional and hybrid composite coatings on MRC-5 human lung fibroblast cell line was elucidated. ACP/TiO2 and ACP/TiO2/ /ChOL were deposited onto Ti by a novel in situ anodization/anaphoretic process at constant voltage. Cytotoxicity tests showed that there was no significant decrease in the survival of healthy MRC-5 cells exposed to composite samples without chitosan lactate, while there was an increase in the number of viable cells in the sample containing ChOL. These findings show that there was improved cell proliferation, differentiation and cell viability in the ChOL-containing sample, which makes ACP/TiO2/ChOL coating a good candidate for applications in medicine and stomatology.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition",
pages = "555-559",
volume = "86",
number = "6",
doi = "10.2298/JSC210211024P",
url = "https://hdl.handle.net/21.15107/rcub_dais_11738"
}
Pantović-Pavlović, M., Pavlović, M., Kovačina, J., Stanojević, B., Stevanović, J., Panić, V.,& Ignjatović, N.. (2021). Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 86(6), 555-559.
https://doi.org/10.2298/JSC210211024P
https://hdl.handle.net/21.15107/rcub_dais_11738
Pantović-Pavlović M, Pavlović M, Kovačina J, Stanojević B, Stevanović J, Panić V, Ignjatović N. Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition. in Journal of the Serbian Chemical Society. 2021;86(6):555-559.
doi:10.2298/JSC210211024P
https://hdl.handle.net/21.15107/rcub_dais_11738 .
Pantović-Pavlović, Marijana, Pavlović, Miroslav, Kovačina, Jovanka, Stanojević, Boris, Stevanović, Jasmina, Panić, Vladimir, Ignjatović, Nenad, "Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition" in Journal of the Serbian Chemical Society, 86, no. 6 (2021):555-559,
https://doi.org/10.2298/JSC210211024P .,
https://hdl.handle.net/21.15107/rcub_dais_11738 .
3
1
5