Maca, Karel

Link to this page

Authority KeyName Variants
orcid::0000-0002-7535-6920
  • Maca, Karel (18)
Projects

Author's Bibliography

Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior

Casas-Luna, Mariano; Torres-Rodríguez, Jorge Alberto; Valdés-Martínez, Omar Uriel; Obradović, Nina; Slámečka, Karel; Maca, Karel; Kaiser, Jozef; Montúfar, Edgar B.; Čelko, Ladislav

(Elsevier, 2020)

TY  - JOUR
AU  - Casas-Luna, Mariano
AU  - Torres-Rodríguez, Jorge Alberto
AU  - Valdés-Martínez, Omar Uriel
AU  - Obradović, Nina
AU  - Slámečka, Karel
AU  - Maca, Karel
AU  - Kaiser, Jozef
AU  - Montúfar, Edgar B.
AU  - Čelko, Ladislav
PY  - 2020
UR  - https://linkinghub.elsevier.com/retrieve/pii/S027288421933620X
UR  - https://dais.sanu.ac.rs/123456789/6942
AB  - Wollastonite (CaSiO3) based porous structures are useful in a wide range of applications including catalysis. Furthermore, the use of additive manufac…
PB  - Elsevier
T2  - Ceramics International
T1  - Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior
SP  - 8853
EP  - 8861
VL  - 46
IS  - 7
DO  - 10.1016/j.ceramint.2019.12.130
UR  - https://hdl.handle.net/21.15107/rcub_dais_6942
ER  - 
@article{
author = "Casas-Luna, Mariano and Torres-Rodríguez, Jorge Alberto and Valdés-Martínez, Omar Uriel and Obradović, Nina and Slámečka, Karel and Maca, Karel and Kaiser, Jozef and Montúfar, Edgar B. and Čelko, Ladislav",
year = "2020",
abstract = "Wollastonite (CaSiO3) based porous structures are useful in a wide range of applications including catalysis. Furthermore, the use of additive manufac…",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior",
pages = "8853-8861",
volume = "46",
number = "7",
doi = "10.1016/j.ceramint.2019.12.130",
url = "https://hdl.handle.net/21.15107/rcub_dais_6942"
}
Casas-Luna, M., Torres-Rodríguez, J. A., Valdés-Martínez, O. U., Obradović, N., Slámečka, K., Maca, K., Kaiser, J., Montúfar, E. B.,& Čelko, L.. (2020). Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. in Ceramics International
Elsevier., 46(7), 8853-8861.
https://doi.org/10.1016/j.ceramint.2019.12.130
https://hdl.handle.net/21.15107/rcub_dais_6942
Casas-Luna M, Torres-Rodríguez JA, Valdés-Martínez OU, Obradović N, Slámečka K, Maca K, Kaiser J, Montúfar EB, Čelko L. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. in Ceramics International. 2020;46(7):8853-8861.
doi:10.1016/j.ceramint.2019.12.130
https://hdl.handle.net/21.15107/rcub_dais_6942 .
Casas-Luna, Mariano, Torres-Rodríguez, Jorge Alberto, Valdés-Martínez, Omar Uriel, Obradović, Nina, Slámečka, Karel, Maca, Karel, Kaiser, Jozef, Montúfar, Edgar B., Čelko, Ladislav, "Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior" in Ceramics International, 46, no. 7 (2020):8853-8861,
https://doi.org/10.1016/j.ceramint.2019.12.130 .,
https://hdl.handle.net/21.15107/rcub_dais_6942 .
10
7
9

Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior

Casas-Luna, Mariano; Torres-Rodríguez, Jorge Alberto; Valdés-Martínez, Omar Uriel; Obradović, Nina; Slámečka, Karel; Maca, Karel; Kaiser, Jozef; Montúfar, Edgar B.; Čelko, Ladislav

(Elsevier, 2020)

TY  - JOUR
AU  - Casas-Luna, Mariano
AU  - Torres-Rodríguez, Jorge Alberto
AU  - Valdés-Martínez, Omar Uriel
AU  - Obradović, Nina
AU  - Slámečka, Karel
AU  - Maca, Karel
AU  - Kaiser, Jozef
AU  - Montúfar, Edgar B.
AU  - Čelko, Ladislav
PY  - 2020
UR  - https://linkinghub.elsevier.com/retrieve/pii/S027288421933620X
UR  - https://dais.sanu.ac.rs/123456789/8943
AB  - Wollastonite (CaSiO3) based porous structures are useful in a wide range of applications including catalysis. Furthermore, the use of additive manufac…
PB  - Elsevier
T2  - Ceramics International
T1  - Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior
SP  - 8853
EP  - 8861
VL  - 46
IS  - 7
DO  - 10.1016/j.ceramint.2019.12.130
UR  - https://hdl.handle.net/21.15107/rcub_dais_8943
ER  - 
@article{
author = "Casas-Luna, Mariano and Torres-Rodríguez, Jorge Alberto and Valdés-Martínez, Omar Uriel and Obradović, Nina and Slámečka, Karel and Maca, Karel and Kaiser, Jozef and Montúfar, Edgar B. and Čelko, Ladislav",
year = "2020",
abstract = "Wollastonite (CaSiO3) based porous structures are useful in a wide range of applications including catalysis. Furthermore, the use of additive manufac…",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior",
pages = "8853-8861",
volume = "46",
number = "7",
doi = "10.1016/j.ceramint.2019.12.130",
url = "https://hdl.handle.net/21.15107/rcub_dais_8943"
}
Casas-Luna, M., Torres-Rodríguez, J. A., Valdés-Martínez, O. U., Obradović, N., Slámečka, K., Maca, K., Kaiser, J., Montúfar, E. B.,& Čelko, L.. (2020). Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. in Ceramics International
Elsevier., 46(7), 8853-8861.
https://doi.org/10.1016/j.ceramint.2019.12.130
https://hdl.handle.net/21.15107/rcub_dais_8943
Casas-Luna M, Torres-Rodríguez JA, Valdés-Martínez OU, Obradović N, Slámečka K, Maca K, Kaiser J, Montúfar EB, Čelko L. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. in Ceramics International. 2020;46(7):8853-8861.
doi:10.1016/j.ceramint.2019.12.130
https://hdl.handle.net/21.15107/rcub_dais_8943 .
Casas-Luna, Mariano, Torres-Rodríguez, Jorge Alberto, Valdés-Martínez, Omar Uriel, Obradović, Nina, Slámečka, Karel, Maca, Karel, Kaiser, Jozef, Montúfar, Edgar B., Čelko, Ladislav, "Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior" in Ceramics International, 46, no. 7 (2020):8853-8861,
https://doi.org/10.1016/j.ceramint.2019.12.130 .,
https://hdl.handle.net/21.15107/rcub_dais_8943 .
10
7
9

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7048
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_7048
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_7048"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_7048 .
4
1
2

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/4558
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_4558
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_4558"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_4558 .
4
1
2

Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering

Obradović, Nina; Pavlović, Vera P.; Kachlik, Martin; Maca, Karel; Olćan, Dragan; Đorđević, Antonije; Tshantshapanyan, Ani; Vlahović, Branislav; Pavlović, Vladimir B.

(Taylor and Francis, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Tshantshapanyan, Ani
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/4557
AB  - Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.
PB  - Taylor and Francis
T2  - Advances in Applied Ceramics
T1  - Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering
SP  - 241
EP  - 248
VL  - 118
IS  - 5
DO  - 10.1080/17436753.2018.1548150
UR  - https://hdl.handle.net/21.15107/rcub_dais_4557
ER  - 
@article{
author = "Obradović, Nina and Pavlović, Vera P. and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Tshantshapanyan, Ani and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.",
publisher = "Taylor and Francis",
journal = "Advances in Applied Ceramics",
title = "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering",
pages = "241-248",
volume = "118",
number = "5",
doi = "10.1080/17436753.2018.1548150",
url = "https://hdl.handle.net/21.15107/rcub_dais_4557"
}
Obradović, N., Pavlović, V. P., Kachlik, M., Maca, K., Olćan, D., Đorđević, A., Tshantshapanyan, A., Vlahović, B.,& Pavlović, V. B.. (2019). Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering. in Advances in Applied Ceramics
Taylor and Francis., 118(5), 241-248.
https://doi.org/10.1080/17436753.2018.1548150
https://hdl.handle.net/21.15107/rcub_dais_4557
Obradović N, Pavlović VP, Kachlik M, Maca K, Olćan D, Đorđević A, Tshantshapanyan A, Vlahović B, Pavlović VB. Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering. in Advances in Applied Ceramics. 2019;118(5):241-248.
doi:10.1080/17436753.2018.1548150
https://hdl.handle.net/21.15107/rcub_dais_4557 .
Obradović, Nina, Pavlović, Vera P., Kachlik, Martin, Maca, Karel, Olćan, Dragan, Đorđević, Antonije, Tshantshapanyan, Ani, Vlahović, Branislav, Pavlović, Vladimir B., "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering" in Advances in Applied Ceramics, 118, no. 5 (2019):241-248,
https://doi.org/10.1080/17436753.2018.1548150 .,
https://hdl.handle.net/21.15107/rcub_dais_4557 .
7
5
8

Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering

Terzić, Anja; Obradović, Nina; Pouchly, Vaclav; Stojanović, Jovica; Maca, Karel; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2018)

TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Pouchly, Vaclav
AU  - Stojanović, Jovica
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4536
AB  - The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite as low-cost raw materials. Feldspar and barium carbonate, as fluxing agents, were altered in the steatite composition. Dilatometric analysis was applied in the monitoring of the dimensional changes and thereby densification of steatite during the traditional sintering (TS) procedure up to 1200°C. Spark plasma sintering (SPS) method was used under the following sintering conditions: 100°C/min heating rate, uniaxial pressure of 50 MPa; sintering temperature 800°C/1 min or 1000°C/2 min. Crystallinity changes and mineral phase transition during sintering were observed by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy equipped with the EDS mapping. It was found that SPS sintering facilitated all microstructural changes during high temperature treatment and shifted them to lower temperatures. SPS treatment conducted at 1000°C resulted in maximum densification of the steatite powder compacts and the formation stabilized protoenstatite structure. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. ON 172057 and Grant no. III 45008]
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering
SP  - 299
EP  - 312
VL  - 50
IS  - 3
DO  - 10.2298/SOS1803299T
UR  - https://hdl.handle.net/21.15107/rcub_dais_4536
ER  - 
@article{
author = "Terzić, Anja and Obradović, Nina and Pouchly, Vaclav and Stojanović, Jovica and Maca, Karel and Pavlović, Vladimir B.",
year = "2018",
abstract = "The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite as low-cost raw materials. Feldspar and barium carbonate, as fluxing agents, were altered in the steatite composition. Dilatometric analysis was applied in the monitoring of the dimensional changes and thereby densification of steatite during the traditional sintering (TS) procedure up to 1200°C. Spark plasma sintering (SPS) method was used under the following sintering conditions: 100°C/min heating rate, uniaxial pressure of 50 MPa; sintering temperature 800°C/1 min or 1000°C/2 min. Crystallinity changes and mineral phase transition during sintering were observed by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy equipped with the EDS mapping. It was found that SPS sintering facilitated all microstructural changes during high temperature treatment and shifted them to lower temperatures. SPS treatment conducted at 1000°C resulted in maximum densification of the steatite powder compacts and the formation stabilized protoenstatite structure. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. ON 172057 and Grant no. III 45008]",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering",
pages = "299-312",
volume = "50",
number = "3",
doi = "10.2298/SOS1803299T",
url = "https://hdl.handle.net/21.15107/rcub_dais_4536"
}
Terzić, A., Obradović, N., Pouchly, V., Stojanović, J., Maca, K.,& Pavlović, V. B.. (2018). Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering. in Science of Sintering
Belgrade : ETRAN., 50(3), 299-312.
https://doi.org/10.2298/SOS1803299T
https://hdl.handle.net/21.15107/rcub_dais_4536
Terzić A, Obradović N, Pouchly V, Stojanović J, Maca K, Pavlović VB. Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering. in Science of Sintering. 2018;50(3):299-312.
doi:10.2298/SOS1803299T
https://hdl.handle.net/21.15107/rcub_dais_4536 .
Terzić, Anja, Obradović, Nina, Pouchly, Vaclav, Stojanović, Jovica, Maca, Karel, Pavlović, Vladimir B., "Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering" in Science of Sintering, 50, no. 3 (2018):299-312,
https://doi.org/10.2298/SOS1803299T .,
https://hdl.handle.net/21.15107/rcub_dais_4536 .
5
3
4